Search NASA⌕ Search

Engineering topics

Cinque, Gianfelice

Publications and source records attributed to Cinque, Gianfelice.

Structural and Dynamic Analysis of Sulphur Dioxide Adsorption in a Series of Zirconium-Based Metal–Organic Frameworks

We report reversible high capacity adsorption of SO 2 in robust Zr-based metal–organic framework (MOF) materials. Zr-bptc (H 4 bptc=biphenyl-3,3',5,5'-tetracarboxylic acid) shows a high SO 2 uptake of 6.2 mmol g -1 at 0.1 bar and 298 K, reflecting excellent capture capability and removal of SO 2 at low concentration (2500 ppm). Dynamic breakthrough experiments confirm that the introduction of amine, atomically-dispersed Cu II or heteroatomic sulphur sites into the pores enhance the capture of SO 2 at low concentrations. The captured SO 2 can be converted quantitatively to a pharmaceutical intermediate, aryl N-aminosulfonamide, thus converting waste to chemical values. In situ X-ray diffraction, infrared micro-spectroscopy and inelastic neutron scattering enable the visualisation of the binding domains of adsorbed SO 2 molecules and host–guest binding dynamics in these materials at the atomic level. Refinement of the pore environment plays a critical role in designing efficient sorbent materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reversible coordinative binding and separation of sulfur dioxide in a robust metal–organic framework with open copper sites

Emissions of SO 2 from flue gas and marine transport have detrimental impacts on the environment and human health, but SO 2 is also an important industrial feedstock if it can be recovered, stored and transported efficiently. In this paper, we report the exceptional adsorption and separation of SO 2 in a porous material, [Cu 2 (L)] (H 4 L = 4',4'''-(pyridine-3,5-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid)), MFM-170. MFM-170 exhibits fully reversible SO 2 uptake of 17.5 mmol g -1 at 298 K and 1.0 bar, and the SO 2 binding domains for trapped molecules within MFM-170 have been determined. We report the reversible coordination of SO 2 to open Cu(II) sites, which contributes to excellent adsorption thermodynamics and selectivities for SO 2 binding and facile regeneration of MFM-170 after desorption. MFM-170 is stable to water, acid and base and shows great promise for the dynamic separation of SO 2 from simulated flue gas mixtures, as confirmed by breakthrough experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Post-synthetic modulation of the charge distribution in a metal–organic framework for optimal binding of carbon dioxide and sulfur dioxide

Modulation of pore environment is an effective strategy to optimize guest binding in porous materials. We report the post-synthetic modification of the charge distribution in a charged metal–organic framework, MFM-305-CH3, [Al(OH)(L)]Cl, [(H2L)Cl ¼ 3,5-dicarboxy-1-methylpyridinium chloride] and its effect on guest binding. MFM-305-CH3 shows a distribution of cationic (methylpyridinium) and anionic (chloride) centers and can be modified to release free pyridyl N-centres by thermal demethylation of the 1- methylpyridinium moiety to give the neutral isostructural MFM-305. This leads simultaneously to enhanced adsorption capacities and selectivities (two parameters that often change in opposite directions) for CO2 and SO2 in MFM-305. The host–guest binding has been comprehensively investigated by in situ synchrotron X-ray and neutron powder diffraction, inelastic neutron scattering, synchrotron infrared and 2 H NMR spectroscopy and theoretical modelling to reveal the binding domains of CO2 and SO2 in these materials. CO2 and SO2 binding in MFM-305-CH3 is shown to occur via hydrogen bonding to the methyl and aromatic-CH groups, with a long range interaction to chloride for CO2. In MFM-305 the hydroxyl, pyridyl and aromatic C–H groups bind CO2 and SO2 more effectively via hydrogen bonds and dipole interactions. Post-synthetic modification via dealkylation of the as-synthesised metal–organic framework is a powerful route to the synthesis of materials incorporating active polar groups that cannot be prepared directly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Host–guest selectivity in a series of isoreticular metal–organic frameworks: observation of acetylene-to-alkyne and carbon dioxide-to-amide interactions

In order to develop new porous materials for applications in gas separations such as natural gas upgrading, landfill gas processing and acetylene purification it is vital to gain understanding of host–substrate interactions at a molecular level. Herein we report a series of six isoreticular metal–organic frameworks (MOFs) for selective gas adsorption. These materials do not incorporate open metal sites and thus provide an excellent platform to investigate the effect of the incorporation of ligand functionality via amide and alkyne groups on substrate binding. By reducing the length of the linker in our previously reported MFM-136, we report much improved CO2/CH4 (50 : 50) and CO2/N2 (15 : 85) selectivity values of 20.2 and 65.4, respectively (1 bar and 273 K), in the new amide-decorated MOF, MFM-126. The CO2 separation performance of MFM-126 has been confirmed by dynamic breakthrough experiments. In situ inelastic neutron scattering and synchrotron FT-IR microspectroscopy were employed to elucidate dynamic interactions of adsorbed CO2 molecules within MFM-126. Upon changing the functionality to an alkyne group in MFM-127, the CO2 uptake decreases but the C2H2 uptake increases by 68%, leading to excellent C2H2/CO2 and C2H2/CH4 selectivities of 3.7 and 21.2, respectively. Neutron powder diffraction enabled the direct observation of the preferred binding domains in MFM-126 and MFM-127, and, to the best of our knowledge, we report the first example of acetylene binding to an alkyne moiety in a porous material, with over 50% of the acetylene observed within MFM-127 displaying interactions (<4 A) with the alkyne functionality of the framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Confinement of Iodine Molecules into Triple-Helical Chains within Robust Metal–Organic Frameworks

During nuclear waste disposal process, radioactive iodine as a fission product can be released. The widespread implementation of sustainable nuclear energy thus requires the development of efficient iodine stores that have simultaneously high capacity, stability and more importantly, storage density (and hence minimized system volume). Here, we report high I 2 adsorption in a series of robust porous metal–organic materials, MFM-300(M) (M = Al, Sc, Fe, In). MFM-300(Sc) exhibits fully reversible I 2 uptake of 1.54 g g –1 , and its structure remains completely unperturbed upon inclusion/removal of I 2 . Direct observation and quantification of the adsorption, binding domains and dynamics of guest I 2 molecules within these hosts have been achieved using XPS, TGA-MS, high resolution synchrotron X-ray diffraction, pair distribution function analysis, Raman, terahertz and neutron spectroscopy, coupled with density functional theory modeling. These complementary techniques reveal a comprehensive understanding of the host–I 2 and I 2 –I 2 binding interactions at a molecular level. The initial binding site of I 2 in MFM-300(Sc), I 2 I , is located near the bridging hydroxyl group of the [ScO 4 (OH) 2 ] moiety [I 2 I ···H–O = 2.263(9) Å] with an occupancy of 0.268. I 2 II is located interstitially between two phenyl rings of neighboring ligand molecules [I 2 II ···phenyl ring = 3.378(9) and 4.228(5) Å]. I 2 II is 4.565(2) Å from the hydroxyl group with an occupancy of 0.208. Significantly, at high I 2 loading an unprecedented self-aggregation of I 2 molecules into triple-helical chains within the confined nanovoids has been observed at crystallographic resolution, leading to a highly efficient packing of I 2 molecules with an exceptional I 2 storage density of 3.08 g cm –3 in MFM-300(Sc).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synchrotron based infrared imaging and spectroscopy via focal plane array on live fibroblasts in D2O enriched medium

We tested the viability of using synchrotron based infrared imaging to study biochemical processes inside living cells. As a model system, we studied fibroblast cells exposed to a medium highly enriched with D2O. We could show that the experimental technique allows us to reproduce at the cellular level measurements that are normally performed on purified biological molecules. We can obtain information about lipid conformation and distribution, kinetics of hydrogen/deuterium exchange, and the formation of concentration gradients of H and O isotopes in water that are associated with cell metabolism. The implementation of the full field technique in a sequential imaging format gives a description of cellular biochemistry and biophysics that contains both spatial and temporal information.

Cell Lipids↗

Multiple Element Infrared Synchrotron Mirrors

Multiple element focussing mirrors are simulated, with a novel design to correct for the spatially extended source in bending magnet infrared beamlines with large acceptance apertures. The calculated enhancement of the effective source brightness is a factor of 4.6 at lambda = 2 {mu}m, 2.5 at lambda = 10 {mu}m and 1.0 at lambda = 100 {mu}m.

43 PARTICLE ACCELERATORS↗