Progress in Performance Improvement and New Research Areas for Cost Reduction of 2G HTS Wires
Explore the source record for details and available documents.
Engineering topics
Publications and source records attributed to Civale, L..
Explore the source record for details and available documents.
The influence of Zr doping in (Gd, Y)-Ba-Cu-O ((Gd, Y)BCO) tapes made by metal-organic chemical vapor deposition has been studied with a specific objective of uniform and reproducible enhancement in in-field critical current (I{sub c}) over long lengths. 50 m long tapes with 7.5 and 10 at.% Zr doping in 1 {mu}m thick (Gd, Y)BCO films have been found to exhibit a sharply enhanced peak in I{sub c} in the orientation of field parallel to the c-axis and retain 28% of their self-field I{sub c} value at 77 K and 1 T. BaZrO{sub 3} (BZO) nanocolumn density in the cross-sectional microstructure was found to increase with increasing Zr addition. The end segments of the 50 m long tapes were found to display nearly identical angular dependence of critical current at 77 K and 1 T, indicative of the uniformity in in-field performance over this length. A 610 m long tape was fabricated with 10% Zr doping and a 130 m segment showed a 3.2% uniformity in critical current measured every meter in the orientation of {beta} {parallel} c-axis. A retention factor of 36% of the zero-field I{sub c} value measured at 0.52 T over the 130 m is consistent with that obtained in short samples.
High critical current densities (J{sub c}) in thick films of the Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7-{delta}} (YBCO, {Tc}{approx}92 K) superconductor directly depend upon the types of nanoscale defects and their densities within the films. A major challenge for developing a viable wire technology is to introduce nanoscale defect structures into the YBCO grains of the thick film suitable for flux pinning and the tailoring of the superconducting properties to specific, application-dependent, temperature and magnetic field conditions. Concurrently, the YBCO film needs to be integrated into a macroscopically defect-free conductor in which the grain-to-grain connectivity maintains levels of inter-grain J{sub c} that are comparable to the intra-grain J{sub c}. That is, high critical current (I{sub c}) YBCO coated conductors must contain engineered in homogeneities on the nanoscale, while being homogeneous on the macroscale. An analysis is presented of the advances in high-performance YBCO coated-conductors using chemical solution deposition (CSD) based on metal trifluoroacetates and the subsequent processing to nano-engineer the microstructure for tunable superconducting wires. Multi-scale structural, chemical, and electrical investigations of the CSD film processes, thick film development, key microstructural features, and wire properties are presented. Prospects for further development of much higher I{sub c} wires for large-scale, commercial application are discussed within the context of these recent advances.