Engineering topics

Clark, Roger N.

Publications and source records attributed to Clark, Roger N..

29 records · Page 2

NASA NTRS1992

Thermal emission spectrometer experiment - Mars Observer mission

The paper describes the thermal emission spectrometer (TES) designed for the Mars Observer mission. The TES measurements of the surface and the atmosphere of Mars will be used to determine and map the composition of the surface rocks, minerals, and the condensates. Examples of information that will be obtained from TES data include mineral abundance maps, condensate properties and their distribution in time and space, aerosol properties and their distribution in time and space, the rock abundance, the polar energy balance, and properties of gaseous species. Where appropriate, these derived parameters will be distributed in the form of gridded map, to allow direct comparison with other derived data sets.

Christensen, Philip R.↗

NASA NTRS1991

Modeling the reflectance spectrum of Callisto 0.25 to 4.1 microns

Models employing Hapke's (1981) radiative transfer theory are presented for the 0.2-4.1 micron reflectance spectrum. A simultaneous intimate, as well as aereal, mixture solution of ice and dark material is envisioned, in order to satisfy both absorption band depths and reflectance levels. The models indicate that the surface's ice component is rather large-grained, and that the major spectral features above about 2.5 microns cannot be accounted for by the ice. Spectra obtained for the nonice material were similar to each other; their absorption features resemble hydrated silicates bearing both oxidation states of iron.

Calvin, Wendy M.↗

NASA NTRS1990

High-resolution reflectance spectra of Mars in the 2.3-micron region - Evidence for the mineral scapolite

Spatially resolved reflectance spectra of Mars obtained from the Cooled Grating Array Spectrometer at the NASA Infrared Telescope Facility during August 26-30, 1988 were used to investigate the mineralogic origin of the 2.36-micron band that was revealed previously in Martian spectra. The new high-resolution data demonstrate that the absorption envelope centered near 2.36 microns has considerable spectral fine structure. It is shown that, while some of the observed absorption is due to CO in the Martian atmosphere, a significant amount of the observed spectral behavior is due to a solid mineral phase on the Martian surface. The solid-phase absorption features observed were found to match the spectral fine structure of minerals in the scapolite family. Scapolites of differing compositions were found which closely reproduce the regional spectral variations observed on Mars.

Clark, Roger N.↗

NASA NTRS1990

Infrared spectra and crystal chemistry of scapolites - Implications for Martian mineralogy

Near-IR and mid-IR spectra of 27 scapolites with a wide range of compositions were compared to the features of the 2.35-micron band absorption system that was recently discovered in reflectance spectra of Mars. Results suggest that the 2.36-micron features are due to the presence of small amounts (about 0.5 wt pct each) of HCO3(-) and HSO4(-) in the anion sites of a scapolite. Five of the scapolites (including two meionite and three mizzonite samples) showed absorption features unique to HCO3(-) and HSO4(-). It was determined that the features of the 2.36-micron-centered system are produced by a disordered anion site occupancy and that the band intensity also depends on the HCO3(-)/HSO4(-) ratio. It was found (Clark et al., 1990) that HCO3(-) and HSO4(-) bearing minerals other than scapolites do not exhibit spectral features of the scapolite.

Swayze, Gregg A.↗

NASA NTRS1990

High spectral resolution reflectance spectroscopy of minerals

The reflectance spectra of minerals are studied as a function of spectral resolution in the range from 0.2 to 3.0 microns. Selected absorption bands were studied at resolving powers as high as 2240. At resolving powers of approximately 1000, many OH-bearing minerals show diagnostic sharp absorptions at the resolution limit. At low resolution, some minerals may not be distinguishable, but as the resolution is increased, most can be easily identified. As the resolution is increased, many minerals show fine structure, particularly in the OH-stretching overtone region near 1.4 micron. The fine structure can enhance the ability to discriminate between minerals, and in some cases the fine structure can be used to determine elemental composition.

Clark, Roger N.↗

NASA NTRS1989

Spectral characteristics of chlorites and Mg-serpentines using high-resolution reflectance spectroscopy

High-resolution reflectance spectroscopy is used to determine the spectral characteristics of serpentines and chlorites. The structure and chemistry of hydrous layered silicates are reviewed. The possibility of distinguishing between isochemical end-members of the Mg-rich serpentine group and the capability of recognizing spectral variations in chlorites as a function of Fe/Mg ratio are demonstrated. Consideration is given to the application of the findings to terrestrial, asteroid, and meteorite studies.

King, Trude V. V.↗

NASA NTRS1988

Calibration and evaluation of AVIRIS data: Cripple Creek in October 1987

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were obtained over Cripple Creek and Canon City Colorado on October 19, 1987 at local noon. Multiple ground calibration sites were measured within both areas with a field spectrometer and samples were returned to the laboratory for more detailed spectral characterization. The data were used to calibrate the AVIRIS data to ground reflectance. Once calibrated, selected spectra in the image were extracted and examined, and the signal to noise performance was computed. Images of band depth selected to be diagnostic of the presence of certain minerals and vegetation were computed. The AVIRIS data were extremely noisy, but images showing the presence of goethite, kaolinite and lodgepole pine trees agree with ground checks of the area.

Clark, Roger N.↗

NASA NTRS1988

Search for volatiles on icy satellites. I - Europa

NASA IRTF reflectance spectra of unprecedented precision, obtained for the leading and trailing sides of Europa, are presently noted to no longer show the apparent absorptions seen in 1980 and 1985. It is presently suggested that if the weak absorptions seen in the 1980 and 1985 data are real, they may indicate the transient spectroscopic presence of a molecular component on Europa's trailing side that differs from the water ice known to be the dominant constituent of the surface.

Brown, Robert Hamilton↗

NASA NTRS1987

Causes of spurious features in spectral reflectance data

Several techniques are becoming common in the analysis of imaging spectrometer data that can lead to spurious absorption features or to changes in the position, width, and shape of actual absorption features. It is a common practice to calibrate AIS or other imaging spectrometer data by averaging each pixel along the flight line. The average is used to calibrate the spectral data by dividing the spectrum at each pixel by the average. If some pixels in the data set contain an absorption, then the average will also show an absorption. Some AIS data has had problems with wavelength stability from one scan line to the next which can produce spurious features with some analysis methods. If a pixel has a spectrum with an absorption having a different position or width than the spectrum used in a ratio, then the ratio can produce a spurious absorption at a different position and width than the true absorption feature. An average spectrum ratioed to each pixel will produce band shifts, and changes in width or shape. If continuum removal is performed by substraction rather than division, band positions can also be shifted.

Clark, Roger N.↗

NASA NTRS1987

Automatic continuum analysis of reflectance spectra

A continuum algorithm based on a Segmented Upper Hull method (SUH) is described. An upper hull is performed on segments of a spectrum defined by local minima and maxima. The segments making a complete spectrum are then combined. The definition of the upper hull allows the continuum to be both concave and/or convex, adapting to the shape of the spectrum. The method performs multiple passes on a spectrum by segmenting each local maximum to minimum and performing an upper hull. The algorithm naturally adapts to the widths of absorption features, so that all features are found, including the nature of doublets, triplets, etc. The algorithm is also reasonably fast on common minicomputers so that it might be applied to the large data sets from imaging spectrometers.

Clark, Roger N.↗

NASA NTRS1987

Studies of the scattering/absorption of minerals

Reflectance spectra were computed for water ice and ammonia ice mixtures as functions of weight fraction, grain size, and viewing geometry to simulate possible outer solar system satellite surfaces. Reflectance spectra of planetary surfaces are most affected by the weight fraction and grain sizes of the minerals in the surface. The reflectance can range from 1.0 to about 0.01 by changing the grain size or weight fraction, a factor of 100. Viewing geometry changes the reflectance by about 25 percent or less.

Clark, Roger N.↗