Search NASASearch

Engineering topics

Clark, T. A.

Publications and source records attributed to Clark, T. A..

At least 19 records

Computational Modeling to Limit the Impact Displays and Indicator Lights Have on Habitable Volume Operational Lighting Constraints

NASA has demonstrated an interest in improving astronaut health and performance through the installment of a new lighting countermeasure on the International Space Station. The Solid State Lighting Assembly (SSLA) system is designed to positively influence astronaut health by providing a daily change to light spectrum to improve circadian entrainment. Unfortunately, existing NASA standards and requirements define ambient light level requirements for crew sleep and other tasks, yet the number of light-emitting diode (LED) indicators and displays within a habitable volume is currently uncontrolled. Because each of these light sources has its own unique spectral properties, the additive lighting environment ends up becoming something different from what was planned or researched. Restricting the use of displays and indicators is not a solution because these systems provide beneficial feedback to the crew. The research team for this grant used computer-based computational modeling and real-world lighting mockups to document the impact that light sources other than the ambient lighting system contribute to the ambient spectral lighting environment. In particular, the team was focused on understanding the impacts of long-term tasks located in front of avionics or computer displays. The team also wanted to understand options for mitigating the changes to the ambient light spectrum in the interest of maintaining the performance of a lighting countermeasure. The project utilized a variety of physical and computer-based simulations to determine direct relationships between system implementation and light spectrum. Using real-world data, computer models were built in the commercially available optics analysis software Zemax Optics Studio(c). The team also built a mockup test facility that had the same volume and configuration as one of the Zemax models. The team collected over 1200 spectral irradiance measurements, each representing a different configuration of the mockup. Analysis of the data showed a measurable impact on ambient light spectrum. This data showed that obvious design techniques exist that can be used to bind the ambient light spectrum closer to the planned spectral operating environment for the observer's eye point. The following observations should be considered when designing an operational environment that is dominated by computer displays. When more light is directed into the field of view of the observer, the greater the impact it will make on various human factors issues that depend on spectral shape and intensity. Because viewing angle has a large part to play in the amount of light flux on the crewmember's retina, beam shape, combined with light source location is an important factor for determining percent probable incident flux on the observer from any combination of light sources. Computer graphics design and display lumen output are major factors influencing the amount of spectrally intense light projected into the environment and in the viewer's direction. Use of adjustable white point display software was useful only if the predominant background color was white and if it matched the ambient light system's color. Display graphics that used a predominantly black background had the least influence on unplanned spectral energy projected into the environment. Percent reflectance makes a difference in total energy reflected back into an environment, and within certain architectural geometries, reflectance can be used to control the amount of a light spectrum that is allowed to perpetuate in the environment. Data showed that room volume and distance from significant light sources influence the total spectrum in a room. Smaller environments had a homogenizing effect on total light spectrum, whereas light from multiple sources in larger environments was less mixed. The findings indicated above should be considered when making recommendations for practice or standards for architectural systems. The ambient lighting system, surface reflectance, and display and indicator implementation all factor into the users' spectral environment. A variety of low-cost solutions exist to mitigate the impact of light from non-architectural lighting systems, and much potential for system automation and integration of display systems with the ambient environment. This team believes that proper planning can be used to avoid integration problems and also believes that human-in-the-loop evaluations, real-world test and measurement, and computer modeling can be used to determine how changes to a process, display graphics, and architecture will help maintain the planned spectral operating lighting environment.

Clark, T. A.

Computational Modeling to Limit the Impact Displays and Indicator Lights Have on Habitable Volume Operational Lighting Constraints

NASA has demonstrated an interest in improving astronaut health and performance through the installment of a new lighting countermeasure on the International Space Station. The Solid State Lighting Assembly (SSLA) system is designed to positively influence astronaut health by providing a daily change to light spectrum to improve circadian entrainment. Unfortunately, existing NASA standards and requirements define ambient light level requirements for crew sleep and other tasks, yet the number of light-emitting diode (LED) indicators and displays within a habitable volume is currently uncontrolled. Because each of these light sources has its own unique spectral properties, the additive lighting environment ends up becoming something different from what was planned or researched. Restricting the use of displays and indicators is not a solution because these systems provide beneficial crew feedback.

Clark, T. A.

Computational Modeling to Limit the Impact Displays and Indicator Lights Have on Habitable Volume Operational Lighting Constraints

Even with no ambient lighting system "on", the International Space Station glows at night. The glow is caused by indicator lamps and displays that are not included with the specification of the ambient lighting system. How does this impact efforts to improve the astronaut's lighting environment to promote more effective sleep patterns? Do the extra indicators and displays add enough light to change the spectrum of light the crew sees during the day as well? If spacecraft environments are specifically engineered to have an ambient lighting system that emits a spectrum promoting a healthy circadian response, is there a way control the impact? The goal of this project is to investigate how additional light sources, such as displays and indicators change the effective light spectrum of the architectural lighting system and how impacts can be mitigated.

Clark, T. A.

Position and morphology of the compact non-thermal radio source at the Galactic Center

We have determined with VLBI the position of the compact nonthermal radio source at the Galactic Center, commonly referred to as SgrA*, in the J2000.0 reference frame of extragalactic radio sources. We have also determined the size of SgrA* at 1.3, 3.6, and 13 cm wavelengths and found that the apparent size of the source increases proportionally to the observing wavelength squared, as expected from source size broadening by interstellar scattering and as reported previously by other authors. We have also established an upper limit of about 8 mJy at 3.6 cm wavelength for any ultracompact component. The actual size of the source is less than 15 AU. Fourier analysis of our very sensitive 3.6 cm observations of this source shows no significant variations of correlated flux density on time scales from 12 to 700 s.

Marcaide, J. M.

Atmospheric water vapor measurements - Comparison of microwave radiometry and lidar

The NASA/GSFC Crustal Dynamics Project microwave water vapor radiometer (J03) is evaluated in terms of measurements of the integrated precipitable water vapor content of a particular column of the troposphere. The measurements were taken during the Atmospheric Moisture Intercomparison Study (ATMIS) held at Wallops Island (Virginia) during April 1989. Water vapor sensing instruments used during ATMIS, included radiometers, radiosondes, and the NASA/GSFC Raman lidar. Comparisons between water vapor measurements by the radiometer and the lidar yielded a correlation coefficient of 0.998 and rms differences for three nights of -0.2 +/- 0.2 mm (April 11-12), -0.8 +/- 0.5 mm (April 16-17), and -0.4 +/- 0.3 mm (April 17-18). The integrated precipitable water vapor measurements for these three nights were approximately 5, 10 and 21 mm, respectively. This study shows that the radiometer provides accurate continuous measurements of the water vapor integrated through the depth of the atmosphere.

England, Martin N.

An evaluation of water vapor radiometer data for calibration of the wet path delay in very long baseline interferometry experiments

The internal consistency of the baseline-length measurements derived from analysis of several independent VLBI experiments is an estimate of the measurement precision. The paper investigates whether the inclusion of water vapor radiometer (WVR) data as an absolute calibration of the propagation delay due to water vapor improves the precision of VLBI baseline-length measurements. The paper analyzes 28 International Radio Interferometric Surveying runs between June 1988 and January 1989; WVR measurements were made during each session. The addition of WVR data decreased the scatter of the length measurements of the baselines by 5-10 percent. The observed reduction in the scatter of the baseline lengths is less than what is expected from the behavior of the formal errors, which suggest that the baseline-length measurement precision should improve 10-20 percent if WVR data are included in the analysis. The discrepancy between the formal errors and the baseline-length results can be explained as the consequence of systematic errors in the dry-mapping function parameters, instrumental biases in the WVR and the barometer, or both.

Kuehn, C. E.

Comparison of VLBI and SLR geocentric site coordinates

Results are reported from a systematic comparison of the geocentric coordinates determined for 18 pairs of VLBI and satellite laser ranging (SLR) sites. The data and results are presented in tables and briefly characterized. The rms differences in the X, Y, and Z coordinates are found, after a 7-parameter frame adjustment, to be 15, 22, and 22 mm, respectively. The potential usefulness of a combined VLBI-SLR reference frame for spacecraft tracking and similar applications is indicated.

Ray, J. R.

Measurement of horizontal motions in Alaska using very long baseline interferometry

Results are presented on an analysis of VLBI measurements performed between 1984 and 1990 by means of a network of 53 sites in Alaska, the Yukon Territory, and the conterminous United States to determine the extent of horizontal motions in Alaska. Results are presented in two ways, one showing the evolution of individual baselines and the other yielding site velocities; both approaches use VLBI data from other permanent stations in order to define a global reference frame. It was found that VLBI sites within the Alaska-Aleutian subduction boundary zone (Yakataga, Kodiak, and Sand Point) had higher instantaneous velocities relative to eastern North America than the interior sites of Alaska. The results of Yakataga data modeling suggests that the observed motion is the result of elastic straining of the overriding plate due to a locked main thrust zone with a component of oblique slip.

Ma, C.

Geodetic measurement of deformation in the Loma Prieta, California earthquake with very long baseline interferometry

VLBI measurements were conducted immediately after the Loma Prieta earthquake and compared with VLBI gathered at Monterey, San Francisco, and Point Reyes since 1983 to obtain preearthquake deformation rates with respect to a North American reference frame. The estimated displacements at Monterey and San Francisco are consistent with the static displacements predicted on the basis of a coseismic slip model in which slip on the southern segment is shallower than slip on the northern segment of the fault rupture. Cartesian positions are presented at epoch 1990.0 of a set of VLBI fiducial stations and the three mobile sites in the earthquake's vicinity.

Clark, T. A.

Supernova 1987A - A radiosphere resolved with VLBI five days after the neutrino burst

The results of VLBI observations of SN1987A are reported. No emission from the supernova above a level of about 20 percent of the supernova's total flux density was detected, although signals were detected from two calibrator sources with amplitudes roughly equal to those determined in earlier VLBI observations. It is inferred that the supernova's radiosphere was resolved, and a lower bound on the radiosphere's radius of 2.2 mas is estimated from an epoch 5.2 days after the neutrino burst. Given the photometric data from the supernova, a distance to the LMC of 50 + or - 5 kpc, and an apparent expansion velocity that varied systematically with time from 18,000-16,000 km/s, as estimated from the blue-shifted H-alpha absorption lines on the days preceding the observations, it is concluded that 5.2 days after the neutrino burst the supernova's radiosphere was at least 2.5 times larger than the inferred blackbody photosphere, and at least as large as the H-alpha line-forming region.

Jauncey, D. L.

Deformations in VLBI antennas

A study is presented of deformations in antennas with the emphasis on their influence on VLBI measurements. The GIFTS structural analysis program has been used to model the VLBI antenna in Fairbanks (Alaska). The report identifies key deformations and studies the effect of gravity, wind, and temperature. Estimates of expected deformations are given.

Clark, T. A.

VLBI observations of the 0957 + 561 gravitational lens system

A series of VLBI observations of the gravitational lens system 0957 + 561 at a wavelength of 13 cm has yielded the positions of the A and B images, the relative magnification of their largest discernible radio structures, and the time variability of their smallest discernible radio structures. These observations have also allowed upper limits to be placed on the flux density of an expected third image. The positions and relative magnification of the A and B images provide new information with which to constrain models of the lens that forms the images. The detection of variations in the flux densities of the cores of A and B suggests that observations at shorter wavelengths may reveal superluminal motion, which may in turn provide a means to measure the relative time delay.

Gorenstein, M. V.

Determination of relative site motions in the western United States using Mark III very long baseline interferometry

Four years of very long baseline interferometry (VLBI) measurements involving fixed and mobile stations in the western U.S. are analyzed using weighted least squares. Baseline solution time series are used to estimate rates of change of the vector baseline between pairs of VLBI stations. Horizontal vector motions are determined for 18 sites with respect to a site in the Mojave desert. Six sites west of and two sites just to the east of the San Andreas fault show northwestward motion closely parallel to the San Andreas fault. Their motions range from 18 to 43 mm/yr and are significant at confidence levels greater than 99 percent. Motions in California relative to interior North American plate sites are used to estimate an integrated contribution from Basin and Range spreading to the total relative Pacific plate motion as 9-10 mm/yr. A maximum relative velocity of 50-51 mm/yr is found between the interior North American sites and the western California sites, in close agreement with the NUVEL-1 plate motion model.

Clark, T. A.

Radio-source positions from VLBI

Positions of 85 compact extragalactic radio sources and the Galactic object Beta Persei (Algol) have been determined in the J2000.0 coordinate system for analysis of VLBI observations made with the bandwidth-synthesis technique. Twenty-four of these sources were observed with the Mark I VLBI system in 37 sessions distributed between April 1972 and May 1978, and 82 of the sources were observed with the Mark III system in 85 sessions distributed between August 1979 and December 1982. Each session spanned at least 24 hr. Standard errors for the estimated positions on the sky of the about 10 sources frequently observed with the Mark I system are about 1 mas, except for the declinations of nearly equatorial sources, where these errors approach 5 mas. Corresponding uncertainties for the about 20 sources frequently observed with the Mark III system are 0.3 and 2 mas, respectively.

Ma, C.

Geodesy by radio interferometry - Evidence for contemporary plate motion

Analysis of 211 very long baseline interferometry observing sessions carried out between November 1979 and August 1984 has yielded estimates of the distances between various radio telescopes located in North America and Europe. The average rate of change of the distances between four radio telescopes in North America (Haystack Observatory, Massachusetts; Westford Radio Telescope, Massachusetts; George R. Agassiz Station, Texas; and Owens Valley Radio Observatory, California) and one in Europe (Onsala Space Observatory, Sweden) obtained from the analysis of these data is 19 + or 10 mm/yr, where the (68 percent confidence interval) standard deviation is for the estimate of the rate of change of the Haystack-Onsala baseline length, the one determined most accurately from these data. This estimate of the standard deviation is dominated by the effects of correlated systematic errors due mostly to errors in the model used for the atmospheric delay which introduces errors in each baseline length estimate of 40 mm standard deviation and 60 days correlation time. (By contrast the statistical standard deviation is only 2 mm/yr). The estimated geologic rates of change of these baseline lengths, averaged over 10 to the 6th years, are 15 to 17 + or - 3 mm/yr for the various North American sites to Ondala.

Herring, T. A.

Geodesy by radio interferometry - Determinations of baseline vector, earth rotation, and solid earth tide parameters with the Mark I very long baseline radio interferometery system

Thirty-seven very long baseline radio interferometry experiments performed between 1972 and 1978 are analyzed and estimates of baseline vectors between six sites, five in the continental United States and one in Europe are derived. No evidence of significant changes in baseline length is found. For example, with a statistical level of confidence of approximately 85 percent, upper bounds on such changes within the United States ranged from a low of 10 mm/yr for the 850 km baseline between Westford, Massachusetts, and Green Bank, West Virginia, to a high of 90 mm/yr for the nearly 4000 km baseline between Westford and Goldstone, California. Estimates for universal time and for the x component of the position of the earth's pole are obtained. For the last 15 experiments, the only ones employing wideband receivers, the root-mean-square differences between the derived values and the corresponding ones published by the Bureau International de l'Heure are 0.0012 s and 0.018 arc sec respectively. The average value obtained for the radial Love number for the solid earth is 0.62 + or - 0.02 (estimated standard error).

Ryan, J. W.