Search NASA⌕ Search

Engineering topics

Cleland, A. N.

Publications and source records attributed to Cleland, A. N..

A GHz-frequency multistrip acoustic beam splitter for quantum applications

Here we demonstrate a microwave-frequency, two-track acoustic beam splitter, based on a multistrip coupler design matched to four unidirectional transducers, two on each of the two acoustic tracks that make up the device. We explain the device design and its experimental implementation, showing good agreement between our model and the measured device scattering spectra. The beam splitter regime, dividing an input signal at port 1 into closely equal outputs at ports 2 and 3, is reached over a 94.7 MHz bandwidth centered at 4.79 GHz, with an output power division ratio |S 21 /S 31 | 2 = 1.1 ± 0.2. The measured bandwidth of the device is limited by the bandwidth of the transducers, rather than that of the multistrip coupler.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Superconducting qubits in a flip-chip architecture

Flip-chip architectures have recently enabled significant scaling-up of multi-qubit circuits and have been used to assemble hybrid quantum systems that combine different substrates, for example, for quantum acoustics experiments. The standard flip-chip method uses superconducting galvanic connections between two substrates, typically implemented using sophisticated indium wafer-bonding systems, which give highly reliable and temperature-cyclable assemblies, but are expensive, somewhat inflexible in design, and require robust substrates that can sustain the large compressive forces required to cold-weld the indium bonds. A much simpler method is to assemble dies using very low-force contacts and air-dried adhesives, although this does not provide a galvanic contact between the dies. In this work, we demonstrate that the latter technique can be used to reliably couple superconducting qubit circuits, in which the qubits are on separate dies, without the need for a galvanic connection. We demonstrate full vector qubit control of each qubit on each of the two dies, with high-fidelity single-shot readout, and further demonstrate entanglement-generating excitation swaps as well as benchmark a controlled-Z entangling gate between the two qubits on the two dies. This exemplifies a simple and inexpensive assembly method for two-plus-one-dimensional quantum circuit integration that supports the use of delicate or unusually shaped substrates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Flux-pumped impedance-engineered broadband Josephson parametric amplifier

Broadband quantum-limited amplifiers play a critical role in the single-shot readout of superconducting qubits, but a popular implementation, the traveling wave parametric amplifier, involves a complex design and fabrication process. Here, we present a simple design for a Josephson parametric amplifier, using a lumped element resonator comprising a superconducting quantum interference device whose useful bandwidth is enhanced with an on-chip impedance-matching circuit. Additionally, we demonstrate a flux-coupling geometry that maximizes the coupling to the Josepson loop and minimizes spurious excitation of the amplifier resonant circuit. The amplifier, which operates in a flux-pumped mode, is demonstrated with a power gain of more than 20dB over a bandwidth of about 300MHz, where approximate noise measurements indicate quantum-limited pehrformance. A procedure is given for optimizing the bandwidth for this kind of amplifier, using a linearized circuit simulation while minimizing non-linearities.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measurements of a quantum bulk acoustic resonator using a superconducting qubit

Phonon modes at microwave frequencies can be cooled to their quantum ground state using conventional cryogenic refrigeration, providing a convenient way to study and manipulate quantum states at the single phonon level. Phonons are of particular interest because mechanical deformations can mediate interactions with a wide range of different quantum systems, including solid-state defects, superconducting qubits, and optical photons when using optomechanically active constructs. Phonons, thus, hold promise for quantum-focused applications as diverse as sensing, information processing, and communication. Here, we describe a piezoelectric quantum bulk acoustic resonator (QBAR) with a 4.88 GHz resonant frequency, which, at cryogenic temperatures, displays large electromechanical coupling strength combined with a high intrinsic mechanical quality factor, Q i ≈ 4.3 × 10 4 . Using a recently developed flip-chip technique, we couple this QBAR resonator to a superconducting qubit on a separate die and demonstrate the quantum control of the mechanics in the coupled system. Furthermore, this approach promises a facile and flexible experimental approach to quantum acoustics and hybrid quantum systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A fast and large bandwidth superconducting variable coupler

Variable microwave-frequency couplers are highly useful components in classical communication systems and likely will play an important role in quantum communication applications. Conventional semiconductor-based microwave couplers have been used with superconducting quantum circuits, enabling, for example, the in situ measurements of multiple devices via a common readout chain. However, the semiconducting elements are lossy and furthermore dissipate energy when switched, making them unsuitable for cryogenic applications requiring rapid, repeated switching. Superconducting Josephson junction-based couplers can be designed for dissipation-free operation with fast switching and are easily integrated with superconducting quantum circuits. These enable on-chip, quantum-coherent routing of microwave photons, providing an appealing alternative to semiconductor switches. Here, we present and characterize a chip-based broadband microwave variable coupler, tunable over 4-8GHz with over 1.5GHz instantaneous bandwidth, based on the superconducting quantum interference device with two parallel Josephson junctions. The coupler is dissipation-free and features large on-off ratios in excess of 40dB, and the coupling can be changed in about 10ns. The simple design presented here can be readily integrated with superconducting qubit circuits and can be easily generalized to realize a four- or more port device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Continuous and Time-Domain Coherent Signal Conversion between Optical and Microwave Frequencies

A quantum network consisting of computational nodes connected by high-fidelity communication channels could expand information-processing capabilities significantly beyond those of classical networks. Superconducting qubits hold promise for scalable and high-fidelity quantum computation at microwave frequencies but must operate in an isolated cryogenic environment, obviating the potential for practical long-range communication. Quantum communication has, however, been demonstrated with optical photons. A fast efficient quantum-coherent interface between superconducting qubits and optical photons would provide a key resource for a large-scale quantum network or distributed quantum computer. Here, we describe the design and experimental operation of a device incorporating a silicon optomechanical nanobeam combined with an aluminum-nitride-based electromechanical transducer. We experimentally demonstrate classical continuous-wave operation of this device at room temperature with external conversion efficiencies of (2.5 +/- 0.4) x 10 -5 (microwave to optical) and (3.8 +/- 0.4) x 10 -5 (optical to microwave), corresponding to internal efficiencies of 2.4% and 3.7%, respectively. Finally, this device also has a larger bandwidth than previous efficient microwave-optical transducers, allowing us to operate in the time domain with 20-ns pulses.

74 ATOMIC AND MOLECULAR PHYSICS↗

Remote Entanglement via Adiabatic Passage Using a Tunably Dissipative Quantum Communication System

Effective quantum communication between remote quantum nodes requires high fidelity quantum state transfer and remote entanglement generation. Recent experiments have demonstrated that microwave photons, as well as phonons, can be used to couple superconducting qubits, with a fidelity limited primarily by loss in the communication channel. Adiabatic protocols can overcome channel loss by transferring quantum states without populating the lossy communication channel. In this work, we present a unique superconducting quantum communication system, comprising two superconducting qubits connected by a 0.73 m-long communication channel. Significantly, we can introduce large tunable loss to the channel, allowing exploration of different entanglement protocols in the presence of dissipation. When set for minimum loss in the channel, we demonstrate an adiabatic quantum state transfer protocol that achieves 99% transfer efficiency as well as the deterministic generation of entangled Bell states with a fidelity of 96%, all without populating the intervening communication channel, and competitive with a qubit-resonant mode-qubit relay method. We also explore the performance of the adiabatic protocol in the presence of significant channel loss, and show that the adiabatic protocol protects against loss in the channel, achieving higher state transfer and entanglement fidelities than the relay method.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Unidirectional distributed acoustic reflection transducers for quantum applications

Recent significant advances in coupling superconducting qubits to acoustic wave resonators have led to demonstrations of quantum control of surface and bulk acoustic resonant modes as well as Wigner tomography of quantum states in these modes. These advances were achieved through the efficient coupling afforded by piezoelectric materials combined with GHz-frequency acoustic Fabry-Perot cavities. Quantum control of itinerant surface acoustic waves appears in reach but is challenging due to the limitations of conventional transducers in the appropriate gigahertz-frequency band. In particular, gigahertz-frequency unidirectional transducers would provide an important addition to the desired quantum toolbox, promising unit efficiency with directional control over the surface acoustic wave emission pattern. Here, we report the design, fabrication, and experimental characterization of unidirectional distributed acoustic reflection transducers demonstrating a high transduction frequency of 4.8GHz with a peak directivity larger than 25dB and a directivity greater than 15dB over a bandwidth of 17MHz. A numerical model reproduces the main features of the transducer response quite well, with ten adjustable parameters (most of which are constrained by geometric and physical considerations). Finally, this represents a significant step toward quantum control of itinerant quantum acoustic waves.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simple non-galvanic flip-chip integration method for hybrid quantum systems

A challenge faced by experimenters exploring hybrid quantum systems is how to integrate and interconnect different materials and different substrates in a quantum-coherent fashion. Here, we present a simple and inexpensive flip-chip bonding process, suitable for integrating hybrid quantum devices on chips from different substrates. The process only requires equipment and materials used routinely for contact photolithography, and it is possible to undo the bonding and reuse the chips. The technique requires minimal compressive force, so it is compatible with a wide range of different substrates. Unlike indium-based bonding, this process does not establish a galvanic connection between the two chips, but as we show, in some situations this is not necessary. We demonstrate the technique using lithographically patterned quarter-wave coplanar waveguide resonators, fabricated on one chip, and couple these inductively to a transmission line patterned lithographically on a separate chip. The two chips have a vertical interchip gap of about 7 μm, and we can repeatedly achieve lateral alignments of better than 2μm. We measure electromagnetic resonances with low-power (similar to ~1 photon) internal quality factors Q i around 5 x 10 5 , comparable to single-chip performances, with as-designed coupling quality factors Q c ranging from 2 x 10 2 to 5 x 10 5 .

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Violating Bell’s inequality with remotely connected superconducting qubits

Quantum communication relies on the efficient generation of entanglement between remote quantum nodes, as entanglement is required to achieve and verify secure communications. Remote entanglement has been realized using a number of different probabilistic schemes, but deterministic remote entanglement has only been demonstrated recently, using a variety of superconducting circuit approaches. However, the deterministic violation of a Bell inequality, a strong measure of quantum correlation, has not been demonstrated so far in a superconducting quantum communication architecture, in part because achieving sufficiently strong correlation requires fast and accurate control of the emission and capture of the entangling photons. We present a simple and robust architecture for achieving this benchmark result in a superconducting system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantum control of surface acoustic-wave phonons

One of the hallmarks of quantum physics is the generation of non-classical quantum states and superpositions, which has been demonstrated in several quantum systems, including ions, solid-state qubits and photons. However, only indirect demonstrations of non-classical states have been achieved in mechanical systems, despite the scientific appeal and technical utility of such a capability, including in quantum sensing, computation and communication applications. This is due in part to the highly linear response of most mechanical systems, which makes quantum operations difficult, as well as their characteristically low frequencies, which hinder access to the quantum ground state. Here we demonstrate full quantum control of the mechanical state of a macroscale mechanical resonator. Furthermore, we strongly couple a surface acoustic-wave resonator to a superconducting qubit, using the qubit to control and measure quantum states in the mechanical resonator. We generate a non-classical superposition of the zero-and one-phonon Fock states and map this and other states using Wigner tomography. Such precise, programmable quantum control is essential to a range of applications of surface acoustic waves in the quantum limit, including the coupling of disparate quantum systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization and reduction of microfabrication-induced decoherence in superconducting quantum circuits

Many superconducting qubits are highly sensitive to dielectric loss, making the fabrication of coherent quantum circuits challenging. To elucidate this issue, we characterize the interfaces and surfaces of superconducting coplanar waveguide resonators and study the associated microwave loss. We show that contamination induced by traditional qubit lift-off processing is particularly detrimental to quality factors without proper substrate cleaning, while roughness plays at most a small role. Aggressive surface treatment is shown to damage the crystalline substrate and degrade resonator quality. We also introduce methods to characterize and remove ultra-thin resist residue, providing a way to quantify and minimize remnant sources of loss on device surfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Strong environmental coupling in a Josephson parametric amplifier

We present a lumped-element Josephson parametric amplifier designed to operate with strong coupling to the environment. In this regime, we observe broadband frequency dependent amplification with multi-peaked gain profiles. We account for this behavior using the “pumpistor” model which allows for frequency dependent variation of the external impedance. Using this understanding, we demonstrate control over the complexity of gain profiles through added variation in the environment impedance at a given frequency. With strong coupling to a suitable external impedance, we observe a significant increase in dynamic range, and large amplification bandwidth up to 700 MHz giving near quantum-limited performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fabrication and characterization of aluminum airbridges for superconducting microwave circuits

Superconducting microwave circuits based on coplanar waveguides (CPW) are susceptible to parasitic slotline modes which can lead to loss and decoherence. We motivate the use of superconducting airbridges as a reliable method for preventing the propagation of these modes. We describe the fabrication of these airbridges on superconducting resonators, which we use to measure the loss due to placing airbridges over CPW lines. We find that the additional loss at single photon levels is small, and decreases at higher drive powers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗