Search NASASearch

Engineering topics

Cliff, R. A.

Publications and source records attributed to Cliff, R. A..

At least 19 records

An hierarchical system architecture for automated design, fabrication, and repair

The architecture of an automated system which has the following properties is described: (1) if it is presented with a final product specification (within its capabilities) it will do the detailed design (all the way down to the raw materials if need be) and then produce that product; (2) if a faulty final product is presented to the system, it will repair it. Interesting extensions of this architecture would be the ability to add fabricator nodes when required and the ability to add entire ranks when required. This sort of system would be a useful component of a self-replicating system (used in space exploration).

Cliff, R. A.

Acceptable testing of VLSI components which contain error correctors

If a VLSI chip is partitioned into functional units (FU's) and redundant FU's are added, error correcting codes may be employed to increase the yield and/or reliability of the chip. Acceptable testing is defined to be testing the chip with the error corrector functioning, thus obtaining the maximum increase in yield afforded by the error correction. The acceptable testing theorem shows that the use of coding and error correction in conjunction with acceptable testing can significantly increase the yield of VLSI chips without seriously compromising their reliability.

Cliff, R. A.

Digital multiplexing of analog data in a microprocessor controlled data acquisition system

The purpose of the paper is to explore the ramifications of doing the multiplexing function in the digital domain and of using the microprocessor to replace the hardwired control logic which resides in the typical analog to digital converter. Two types of conversion (one working in parallel inputs, and one in sequential order) strategies are discussed where the microprocessor is in full control of the conversion. One advantage of using a digital multiplexor is that, contrary to an analog multiplexor, it does not degrade the fidelity of the conversion process.

Cliff, R. A.

Prediction and measurement results of radiation damage to CMOS devices on board spacecraft

Final results from the CMOS Radiation Effects Measurement (CREM) experiment flown on Explorer 55 are presented and discussed, based on about 15 months of observations and measurements. Conclusions are given relating to long-range annealing, effects of operating temperature on semiconductor performance in space, biased and unbiased P-MOS device degradation, unbiased n-channel device performance, changes in device transconductance, and the difference in ionization efficiency between Co-60 gamma rays and 1-Mev Van de Graaff electrons. The performance of devices in a heavily shielded electronic subsystem box within the spacecraft is evaluated and compared. Environment models and computational methods and their impact on device-degradation estimates are being reviewed to determine whether they permit cost-effective design of spacecraft.

Stassinopoulos, E. G.

Prediction and measurement results of radiation damage to CMOS devices on board spacecraft

All the currently available results of the flight experiment for all the individually instrumented 130 transistors, relating to both biased and unbiased n- and p-channel RCA and -channel AMI devices were presented. The predictions of dose levels based on a detailed analysis of the space radiation environment as encountered by Explorer-55 and calculated by one dimensional slab geometry, and three dimensional spherical geometry were cited.

Stassinopoulos, E. G.

Prediction and measurement of radiation damage to CMOS devices on board spacecraft

The CMOS Radiation Effects Measurement (CREM) experiment is presently being flown on the Explorer-55, to evaluate device performance in the actual space radiation environment and to correlate the respective measurements to on-the-ground laboratory irradiation results. The experiment contains an assembly of CMOS and P-MOS devices shielded in front over 2 pi steradian by flat slabs of aluminum of 40, 80, 150, and 300 mils (1.02, 2.04, 3.81, and 7.62 mm) thicknesses, and by a practically infinite shield in the back. Initial results from the CREM experiment are reported. Predictions of radiation damage to CMOS devices are based on standard environment models and computational techniques. Measured space damage is smaller than predicted by about a factor of 2-3 for thin shields but agrees well with predictions for thicker shields. It is not clear at this time how the trapped particle environment models or the computational methods should be modified in order to achieve better agreement between experimental results and predicted damage curves.

Cliff, R. A.

Prediction and measurement of radiation damage to CMOS devices on board spacecraft

The CMOS Radiation Effects Measurement (CREM) experiment is presently being flown on the Explorer-55. The purpose of the experiment is to evaluate device performance in the actual space radiation environment and to correlate the respective measurements to on-the-ground laboratory irradiation results. The experiment contains an assembly of C-MOS and P-MOS devices shielded in front by flat slabs of aluminum and by a practically infinite shield in the back. Predictions of radiation damage to C-MOS devices are based on standard environment models and computational techniques. A comparison of the shifts in CMOS threshold potentials, that is, those measured in space to those obtained from the on-the-ground simulation experiment with Co-60, indicates that the measured space damage is smaller than predicted by about a factor of 2-3 for thin shields, but agrees well with predictions for thicker shields.

Cliff, R. A.

Prediction and measurement of radiation damage to CMOS devices on board spacecraft

The initial results obtained from the Complementary Metal Oxide Semiconductors Radiation Effects Measurement experiment are presented. Predictions of radiation damage to C-MOS devices are based on standard environment models and computational techniques. A comparison of the shifts in CMOS threshold potentials, that is, those measured in space to those obtained from the on the ground simulation experiment with Co 60, indicated that the measured space damage is greater than predicted by a factor of two for shields thicker than 100 mils (2.54 mm), but agrees well with predictions for the thinner shields.

Cliff, R. A.

Digital phase-locked loop

An digital phase-locked loop is provided for deriving a loop output signal from an accumulator output terminal. A phase detecting exclusive OR gate is fed by the loop digital input and output signals. The output of the phase detector is a bi-level digital signal having a duty cycle indicative of the relative phase of the input and output signals. The accumulator is incremented at a first rate in response to a first output level of the phase detector and at a second rate in response to a second output level of the phase detector.

Cliff, R. A.

Rb-Sr studies of lunar breccias and soils

Investigation results on the Rb-Sr systematics and K concentrations for two Apollo 14 breccias and several Apollo 15, 16, and 17 soils are reviewed. The reported results include the finding that plagioclase clasts from microbreccia fragments in Apollo 16 soil are distinctly too radiogenic to have been in equilibrium with the whole rock fragments 4 b.y. ago.

Mark, R. K.

Rubidium-strontium isotope characteristics of lunar soils.

Evaluation of K, Rb, and Sr concentrations and Sr isotopic composition for hand-picked fractions from the 175- to 1000-micron Apollo 12 fines samples 12032 and 12070 and for two less than 1-mm bulk fines samples, 14163,160 and 14259,21, from Apollo 14 which have model Rb-Sr ages close to 4.6 b.y. The Apollo 14 data indicate the presence of a radiogenic component of 4.6 b.y. model age like the Apollo 12 fines, confirming a very early geochemical differentiation of the moon. Progressively greater enrichment in K and Rb relative to the bulk fines is shown by microbreccia from both samples, ropy brown glass from 12032, and light-grey lithic fragments from 12032. Model Rb-Sr ages, based on a basaltic achondrite initial ratio, are generally close to 4.6 b.y. The microbreccias and ropy brown glass have model ages that are younger but indistinguishable from 4.6 b.y. within analytical error. Light grey lithic fragments from 12032 have a model age of 5.1 b.y. and must have had a multistage Rb/Sr evolution. The data are broadly compatible with two-component mixing models of the Apollo 12 fines. On the basis of modal composition, the microbreccia is considered the major nonbasaltic constituent.

Cliff, R. A.

Novel shift register eliminates logic gates and power switching circuits

Register requiring two integrated circuits per stage has nominal power dissipation of 3.5 mW per stage, its use eliminates reset pulse, allowing data transfer to occur in less than 1 microsecond, and eliminates power application to both right and left portions of the register simultaneously.

Cliff, R. A.