Engineering topics

Clymer, Alexis

Publications and source records attributed to Clymer, Alexis.

5 records

NASA NTRS2017

Evolution of a Simulation Testbed into an Operational Tool

This paper describes the evolution over a 20-year period of the Future ATM (Air Traffic Management) Concepts Evaluation Tool (FACET) from a National Airspace System (NAS) based simulation testbed into an operational tool. FACET was developed as a testbed for assessing futuristic ATM concepts, e.g., automated conflict detection and resolution. NAS Constraint Evaluation and Notification Tool (NASCENT) is an application, within FACET, for alerting airspace users of inefficiencies in flight operations and advising time- and fuel-saving reroutes.It is currently in use at American Airlines Integrated Operations Center in Fort Worth, TX. The concepts assessed,research conducted, and the operational capability developed, along with the NASA support and achievements are presented in this paper.

Sheth, Kapil↗

NASA NTRS2016

Analysis of Multi-Flight Common Routes for Traffic Flow Management

This paper presents an approach for creating common weather avoidance reroutes for multiple flights and the associated benefits analysis, which is an extension of the single flight advisories generated using the Dynamic Weather Routes (DWR) concept. These multiple flight advisories are implemented in the National Airspace System (NAS) Constraint Evaluation and Notification Tool (NASCENT), a nation-wide simulation environment to generate time- and fuel-saving alternate routes for flights during severe weather events. These single flight advisories are clustered together in the same Center by considering parameters such as a common return capture fix. The clustering helps propose routes called, Multi-Flight Common Routes (MFCR), that avoid weather and other airspace constraints, and save time and fuel. It is expected that these routes would also provide lower workload for traffic managers and controllers since a common route is found for several flights, and presumably the route clearances would be easier and faster. This study was based on 30-days in 2014 and 2015 each, which had most delays attributed to convective weather. The results indicate that many opportunities exist where individual flight routes can be clustered to fly along a common route to save a significant amount of time and fuel, and potentially reducing the amount of coordination needed.

weather uncertainty↗

NASA NTRS2016

Analysis of Multi-Flight Common Routes for Traffic Flow Management

When severe convective weather requires rerouting aircraft, FAA traffic managers employ severe weather avoidance plans (e.g., Playbook routes, Coded Departure Routes, etc.) These routes provide pilots with safe paths around weather-affected regions, and provide controllers with predictable, and often well-established flight plans. However, they often introduce large deviations to the nominal flight plans, which may not be necessary as weather conditions change. If and when the imposed traffic management initiatives (TMIs) become stale, updated shorter path flight trajectories may be found en route, providing significant time-savings to the affected flights. Multiple Flight Common Routes (MFCR) is a concept that allows multiple flights that are within a specified proximity or region, to receive updated shorter flight plans in an operationally efficient manner. MFCR is believed to provide benefits to the National Airspace System (NAS) by allowing traffic managers to update several flight plans of en route aircraft simultaneously, reducing operational workload within the TMUs of all affected ARTCCs. This paper will explore some aspects of the MFCR concept by analyzing multiple flights that have been selected for rerouting by the NAS Constraint Evaluation and Notification Tool (NASCENT). Various methods of grouping aircraft with common or similar routes will be presented, along with a comparison of the efficacy of these methods.

dynamic weather routes↗

NASA NTRS2015

Assessment of a National Airspace System Airborne Rerouting Tool

This paper presents the assessment of a National Airspace System airborne rerouting tool. The tool implements NASA’s Dynamic Weather Routes concept for wind-corrected flying-time savings during convective weather activity. A description of the system, as applicable to the entire United States airspace is provided, and results are presented demonstrating benefits of such a system from various Centers and airlines’ perspectives. Three cases for selection of reroute-return capture fix, which prevent unrealistically large controller clearances are presented. Results are shown for potential time- and fuel-savings (over 134,000 minutes and 4.2 million lbs. of fuel for over 35,000 proposed reroutes) and sector congestion reduction (over 121 hours in congested sectors) for all 20 Centers. The data used were for 30 days with highest delays attributable to convective weather from April to October of 2014. Other results show the evaluation of the maneuver or reroute start point (a parameter representing the amount of coordination time needed), which highlight the need for a controller-pilot data link. A data link would help achieve higher savings. The results for persistence time, beyond which the time-savings dwindle quickly, help determine the maximum coordination time required for each Center. Finally, an assessment from a current National Operations Manager at the Air Traffic Control System Command Center of the FAA is documented. Those suggestions could improve the efficiency of the air transportation system, especially with the expected improvements in the traffic flow management infrastructure. Currently, one industry partner and one airline are assessing this technology for commercial operational use.

Benefits Assessment↗

NASA NTRS2014

Benefits Analysis of Multi-Center Dynamic Weather Routes

Dynamic weather routes are flight plan corrections that can provide airborne flights more than user-specified minutes of flying-time savings, compared to their current flight plan. These routes are computed from the aircraft's current location to a flight plan fix downstream (within a predefined limit region), while avoiding forecasted convective weather regions. The Dynamic Weather Routes automation has been continuously running with live air traffic data for a field evaluation at the American Airlines Integrated Operations Center in Fort Worth, TX since July 31, 2012, where flights within the Fort Worth Air Route Traffic Control Center are evaluated for time savings. This paper extends the methodology to all Centers in United States and presents benefits analysis of Dynamic Weather Routes automation, if it was implemented in multiple airspace Centers individually and concurrently. The current computation of dynamic weather routes requires a limit rectangle so that a downstream capture fix can be selected, preventing very large route changes spanning several Centers. In this paper, first, a method of computing a limit polygon (as opposed to a rectangle used for Fort Worth Center) is described for each of the 20 Centers in the National Airspace System. The Future ATM Concepts Evaluation Tool, a nationwide simulation and analysis tool, is used for this purpose. After a comparison of results with the Center-based Dynamic Weather Routes automation in Fort Worth Center, results are presented for 11 Centers in the contiguous United States. These Centers are generally most impacted by convective weather. A breakdown of individual Center and airline savings is presented and the results indicate an overall average savings of about 10 minutes of flying time are obtained per flight.

NAS based Benefits Analysis↗