Engineering topics

Cochran, Eric W.

Publications and source records attributed to Cochran, Eric W..

7 records

DOE OSTI2023

Identifying Performance Advantaged Biobased Chemicals Utilizing Bioprivileged Molecules (Final Report)

Two technology areas were advanced; a) novel molecules with improved performance in the end use application of organic corrosion inhibitors and flame retardant nylon polymers and b) development of a systematic process for identifying biomass-derived molecules with improved performance in end use applications. In total 17 novel organic corrosion inhibitors were identified that had significantly better performance than the commercial reference organic corrosion inhibitor and 7 novel nylons were synthesized with improved flame retardant properties relative to standard nylon-6,6. While an end-to-end systematic process for identifying biomass-derived molecules with improved end use performance was not completed, important progress was made computational tools for mining chemical structures from the literature and databases as well as establishing reaction network generation algorithms to aid in the discovery of novel molecules.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Standalone Block Copolymer Nanoballoons: Decoupling Self-Assembly from Implementation in Nanomanufacturing

Here we report a facile method to produce isolatable hollow-core elastomeric vesicles, “nanoballoons”, prepared via block copolymer self-assembly in a polymer blend. Poly(isoprene-block-dimethylsiloxane) (PI-PDMS) diblock copolymers are blended with PDMS homopolymers (h-PDMS) as a “solvent” phase to template the self-assembly of PDMS-tethered vesicles with PI walls. The walls are subsequently crosslinked to yield mechanically stabilized elastomeric vesicles. The h-PDMS inner-core and matrix are separated from the vesicles by dialysis to yield the matrix-free nanoballoons. These objects, 0.3 – 1 μm in diameter, can be further reincorporated into a crosslinkable PDMS. Throughout the self-assembly, recovery, and reincorporation processes we apply several techniques including solvent dispersion/dynamic light scattering (DLS) measurements, transmission electron microscopy (TEM)/energy-dispersive X-ray spectroscopy (EDS), and small-angle X-ray scattering (SAXS) to provide a consilient body of evidence that the nanoballoon morphology is retained. Furthermore, this work presents advanced nanomanufacturing schema that illustrate the decoupling of the thermodynamic and dynamic factors that govern macromolecular self-assembly from the environment in which the self-assembled objects are deployed.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Bioenabled Platform to Access Polyamides with Built-In Target Properties

The diversification of platform chemicals is key to today’s petroleum industry. Likewise, the flourishing of tomorrow’s biorefineries will rely on molecules with next-generation properties from biomass. Herein, we explore this opportunity with a novel approach to monomers with custom property enhancements. Cyclic diacids with alkyl and aromatic decorations were synthesized from muconic acid by Diels-Alder cycloaddition and copolymerized with hexamethylenediamine and adipic acid to yield polyamides with built-in hydrophobicity and flame retardancy. Testing shows a 70% reduction in water uptake and doubling of char production while largely retaining other key properties of the parent Nylon-6,6. In conclusion, the present approach can be generalized to access a wide range of performance-advantaged polyamides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Plastic glut down a microbial gut

Enzymes sequestered from microbes have demonstrated the ability to readily digest amorphous regions of polyethylene terephthalate (PET) in ambient conditions. Although nascent, enzymatic depolymerization can soon vie for commercialization and provide monomeric feedstock at rates comparable to petrochemical feedstock for repolymerization, achieving the coveted goal of cradle-to-cradle recycling. © 2022 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2021

3D Printable All-Polymer Epoxy Composites

Herein, 3D printable polymer-toughened epoxy resin composites are reported. Epoxy resins are widely used due to their excellent properties, such as thermal and chemical stability. However, their applications are limited by traditional mold-based manufacturing and their high brittleness. Mixtures of homopolymers, diblock copolymers, and triblock copolymers composed of poly(phenylene ether), poly(styrene), poly(methyl methacrylate), and poly(ethylene oxide) that self-assemble into micelles in the uncured resin are employed, providing a balance of structure, creep resistance, and flowability that enables 3D printing processing techniques and a retention of dimensional fidelity from the time of printing throughout the cured state. The precured ink is solid at room temperature and has strong shear-thinning behavior at elevated temperature for printing. As the printed parts cure, the polymer morphology evolves via reaction induced phase separation to yield finished composites with enhanced mechanical properties, including a 40% increase in the impact strength compared to the neat epoxy, without compromising thermal properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

High-Temperature-Performance Cyanate Ester Composites with Carboranes

Cyanate ester (CE) is an important class of materials among high-temperature performance thermosets. It is used in aerospace launch vehicles, heat sinks, booms, and trusses of satellites etc. due to its high glass transition temperatures (>220°C), excellent thermal stability, and low flammability. Current approaches to improve the thermal stability of CE include incorporation of siloxanes or phosphorus- based flame retardants (PFRs). In this work, we have explored boron-based hydroxy (PD) and epoxy (EP) functionalized carborane additives to improve the thermal properties of CE. Carborane fillers were solvent blended at various mass loadings in the resin and cured to study their effect on thermal properties. PD and EP carboranes react with CE to form iminocarbonate and oxazolidinone linkages respectively. Cure kinetics studies at different wt% loadings explained that carboranes catalyze the curing reaction by reducing curing activation energy by about 54% and 26% for 10 wt% loadings of PD and EP carboranes respectively. In addition, carborane-filled cyanate ester (CE) nanocomposites demonstrate an exceptionally high thermal stability as compared to the pristine resin in air and inert environment. Our thermogravimetric analysis (TGA) experiments show that the ultimate char yield of the resin can be increased from 0% to as high as 76% and 82% with 30 wt% PD and EP carborane loading respectively at 1000 °C in air. The initial degradation temperature T d;5 of the composites decreased with increasing carborane loadings in both air and argon. For instance, T d;5 for CE was 465 and 471.6 °C in argon and air while that for P20 was 437.4 and 452.1 °C. Modulated TGA studies gave evidence of the effect of carboranes on degradation kinetics and the mechanism of the resin in air and inert environment. The effect of bonding between carboranes and CE at various loadings on the thermal expansion of the matrix was also studied using Thermomechanical Analyzer (TMA). PD carborane reduced the T g for P20 to about 225 °C while CE had T g >350 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Analysis of the Amorphous and Interphase Influence of Comononomer Loading on Polymer Properties toward Forwarding Bioadvantaged Copolyamides

In this paper we present an approach for selectively modifying the properties of semicrystalline polymers by introducing “bioadvantaged” counits. With this approach, the unique functionality of biomass can be leveraged to tailor the properties of the amorphous phase of semicrystalline polymers with minimal impact on crystallinity and thermomechanical properties. As a model case, PA 6,6 copolyamides were produced using the bioadvantaged monomer trans-3-hexenedioic acid (t3HDA). The analogous structure of t3HDA to adipic acid, a PA 6,6 monomer, allows for seamless integration. Screening over the entire composition range identified the t3HDA loading (20 mol%) beyond which properties deviate appreciably from Nylon 6,6. Once identified, copolyamides of suitable compositions were upgraded to commercial quality and fully characterized to assess the influence of counit loading and polymer structure on thermal and mechanical properties. Samples were characterized using gel permeation chromatography (GPC), proton nuclear magnetic resonance spectroscopy (1H NMR), heteronuclear single quantum coherence spectroscopy (HSQC), wide-angle X-ray scattering (WAXS), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), tensile testing, flexural testing, and water absorption testing. t3HDA units were shown to hydrate during the harsh polycondensation to 3-hydroxyhexanedioic acid (3HHDA) and fully incorporate into the polymer backbone. Loading levels up to 20% were shown to have comparable thermal and mechanical properties in the dry state, yet moisture absorption—a known method for improving the toughness, yield strain, and elongation of polyamides—was enhanced by over 100% at 20% loading. This case study on bioadvantaged copolymers elucidates the governing structure-function principles that can be leveraged to forward value-added renewable polymers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗