Search NASASearch

Engineering topics

Cockrell, C. R.

Publications and source records attributed to Cockrell, C. R..

At least 37 records · Page 2

Modified Hilbert transform pair and Kramers-Kronig relations for complex permittivities

Modified versions of the Hilbert transform pair and the Kramers-Kronig relations are derived for the complex permittivity of a plasma/dielectric medium which is singular at the frequency of the applied electric field equal to 0. Such a complex permittivity exists when the plasma/dielectric model allows a loss term but no restoring term. Permittivity, in which both loss and restoring terms are included, is shown to satisfy the standard Hilbert transform pair and, thus, the Kramers-Kronig relations.

Cockrell, C. R.

Causality of plasma permittivity with loss and restoring terms

The causality of the complex permittivity for a plasma model in which both loss and restoring terms are included is shown. Discussions as to what occurs in this causality property when the loss and restoring terms vanish are presented. Results are shown to agree with earlier work.

Cockrell, C. R.

Solutions of differential equations with regular coefficients by the methods of Richmond and Runge-Kutta

Numerical solutions of the differential equation which describe the electric field within an inhomogeneous layer of permittivity, upon which a perpendicularly-polarized plane wave is incident, are considered. Richmond's method and the Runge-Kutta method are compared for linear and exponential profiles of permittivities. These two approximate solutions are also compared with the exact solutions.

Cockrell, C. R.

Electronic compensation for reflector surface distortion to improve radiation pattern characteristics of antennas

A simple procedure is described for determining the excitation coefficients of an array feed which compensates for the surface distortion of a reflector antenna to improve the radiation pattern in such a way as to approximate the performance of the undistorted antenna. A computer simulation for a practical feed array is presented as an example of compensation for the distortion of an actual antenna.

Bailey, M. C.

Large space antenna communications systems: Integrated Langley Research Center/Jet Propulsion Laboratory development activities. 2: Langley Research Center activities

The electromagnetic analysis activities at the Langley Research Center are resulting in efficient and accurate analytical methods for predicting both far- and near-field radiation characteristics of large offset multiple-beam multiple-aperture mesh reflector antennas. The utilization of aperture integration augmented with Geometrical Theory of Diffraction in analyzing the large reflector antenna system is emphasized.

Cambell, T. G.

Electromagnetic design of a microwave radiometer antenna system

A preliminary electromagnetic (EM) design of a radiometric antenna system was developed for the microwave radiometer spacecraft mission. The antenna system consists of a large spherical reflector and an array of feed horns along a concentric circular arc in front of the reflector. The reflector antenna was sized to simultaneously produce 200 contiguous 1 km diameter footprints with an overall beam efficiency of 90 percent, and the feed horns and feed horn array were designed to monitor the radiation from the footprints.

Agrawal, P. K.

"Finite part" electric and magnetic stored energies for planar antennas

A pair of formulas representing the time-average "finite part" electric and magnetic stored energies for planar antennas are derived. It is also shown that the asymptotic reciprocal relationship between quality factor and relative bandwidth exists for planar antennas.

Cockrell, C. R.

Patterns of broad-beam antennas of different polarizations next to simple Hangar models

Broad-beam antennas of different polarizations radiating next to simple hangar models are investigated. Expressions that represent the elevation-plane patterns of slots in and 1/4 wavelength monopoles on a finite rectangular ground plane upon which a rectangular scattering object was placed were derived using geometrical theory of diffraction. These expressions were obtained by superposing the infinite ground plane solutions, reflected field solutions from the scattering object and diffracted field solutions in their respective regions of validity. Patterns for a 1/2 wavelength slot and 1/4 wavelength electric monopole are verified experimentally for a number of source locations. Data pertaining to the polarization question in regard to the multipath problem are presented.

Cockrell, C. R.

The input admittance of the rectangular cavity-backed slot antenna

The input admittance of the rectangular cavity-backed slot antenna is investigated. The slot is assumed narrow so that the voltage distribution in its aperture is sinusoidal. Equations which represent the input admittance of this slot, backed by a rectangular cavity in which a single propagating wave is assumed to exist, are given. Calculations based on these representations are compared to available measured data. As the depth of the cavity increased the resonant frequency decreased and the bandwidth became narrower. Input admittance curves as a function of electrical slot length are also presented for several size cavities.

Cockrell, C. R.

A Theoretical Investigation of the Input Characteristics of a Rectangular Cavity-Backed Slot Antenna

Equations which represent the magnetic and electric stored energies are derived for an infinite section of rectangular waveguide and a rectangular cavity. These representations which are referred to as being physically observable are obtained by considering the difference in the volume integrals appearing in the complex Poynting theorem. It is shown that the physically observable stored energies are determined by the field components that vanish in a reference plane outside the aperture. These physically observable representations are used to compute the input admittance of a rectangular cavity-backed slot antenna in which a single propagating wave is assumed to exist in the cavity. The slot is excited by a voltage source connected across its center; a sinusoidal distribution is assumed in the slot. Input-admittance calculations are compared with measured data. In addition, input-admittance curves as a function of electrical slot length are presented for several size cavities. For the rectangular cavity backed slot antenna, the quality factor and relative bandwidth were computed independently by using these energy relationships. It is shown that the asymptotic relationship which is usually assumed to exist between the quality bandwidth and the reciprocal of relative bandwidth is equally valid for the rectangular cavity backed slot antenna.

Cockrell, C. R.

Diffraction theory techniques applied to aperture antennas on finite circular and square ground planes

Expressions which represent the elevation-plane patterns of a large TEM mode coax aperture and a TM-01 mode circular aperture on finite circular and square ground planes have been derived using geometrical theory of diffraction; design curves for the coax case are presented. The expressions for the field pattern were obtained by superposing the infinite ground plane solutions, the first-order diffracted field solutions, and the axial caustic solutions in their respective regions of validity. The pattern analyses for the coax and circular apertures are verified experimentally.

Cockrell, C. R.

Analysis and design of antennas for air traffic collision avoidance systems.

The analysis and design procedure of an antenna for a CW Doppler radar system being developed for pilot warning of midair collision hazards is presented. The antenna consists of two vertical arrays of half-wavelength dipoles mounted near a circular conducting cylinder. Each vertical array is composed of three vertical dipoles. Each array provides relatively uniform illumination (2.3 dB) in the forward 180-deg angular segment of the horizontal plane and approximately plus or minus 10 to 15 deg coverage in the vertical plane. The antenna could be used in a two-mode operation, either in a standard monopulse radar system (sum and difference amplitude patterns) or in a system where amplitude and phase are the measurable quantities.

Balanis, C. A.