Search NASA⌕ Search

Engineering topics

Cohen, B. I.

Publications and source records attributed to Cohen, B. I..

Simulations of tokamak edge plasma turbulent fluctuations based on a minimal 3D model

In this study, a new simulation model for tokamak boundary plasma, SOLT3D, is implemented in the BOUT++ framework. The simulation model includes a set of dynamic equations describing collisional boundary plasma and neutral gas in the tokamak scrape-off layer and divertor region. The model is verified against standard linear plasma instabilities and available nonlinear results. For L-mode like conditions, SOLT3D reproduces characteristics of boundary plasma turbulent fluctuations that are similar to published experimental data, in terms of the amplitude and spatial dependence of the fluctuations. It also reproduces realistic plasma fluxes on material surfaces and expected Bohm-like effective radial transport. Plasma fluctuations inferred from the simulations imply inevitably a significant level of intrinsic 'noise' for axisymmetric tokamak plasma transport modeling, introducing errors on the order of unity. In particular, the toroidally averaged atomic rates below 5–10 eV are strongly modified by turbulent plasma fluctuations, which should significantly affect the standard axisymmetric modeling of the tokamak edge plasma and divertor.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Monte Carlo calculation of large and small-angle electron scattering in air

A Monte Carlo method for angle scattering of electrons in air that accommodates the small-angle multiple scattering and larger-angle single scattering limits is introduced. The algorithm is designed for use in a particle-in-cell simulation of electron transport and electromagnetic wave effects in air. The method is illustrated in example calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Efficient Coupling of Monte-Carlo Neutral and Fluid Plasma Models

The objective of this project was to develop an efficient scheme to couple kinetic Monte-Carlo (MC) neutral-species and fluid plasma-(charged-) species codes for the simulation of transport in the outer edge region of magnetic fusion energy (MFE) edge simulation. There was a need for improvement over existing plasma-neutral transport codes, which are either all-fluid, and insufficiently accurate in some important regimes, or very slow due to their use of simple explicit (operator-split) coupling.The resulting capability will be of great value in the interpretation and design of present-day and future MFE plasma devices (e.g., ITER). We developed and demonstrated several new algorithms that can greatly accelerate coupling between numerical code/model compon ents where the coupling introduces numerical “stiffness” and where there is a Monte-Carlo component.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

3-D simulation codes for EMP E1 formation and propagation

LLNL is developing a suite of modern tools for simulating the generation and propagation of the prompt (E1) electromagnetic pulse (EMP). These include the 3-D EMPulse code, based on particle-in-cell methods and a Cartesian grid in the laboratory frame, and a fast-running companion 3-D code, SHEMP, which employs a vector spherical harmonic decomposition. EMPulse is a comprehensive, first-principles code with full generality and requiring significant computing resources. It tracks Compton electrons directly in the laboratory frame, and includes Ohmic and swarm models for the evolving local conductivity. SHEMP builds on the methods used in Longmire's fast-running CHAP code and in our own CHAP-lite; in those codes, 1-D spherical symmetry is assumed, and the calculation takes advantage of a separation of scales. In SHEMP we seek similar efficiencies in 3-D, incorporating non-spherically-symmetric physics via a pseudospectral approach. We describe these tools and other aspects of our project herein.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

EMPulse, a new 3-D simulation code for EMP formation and propagation

EMPulse is a comprehensive and modern 3-D simulation code for electro-magnetic pulse (EMP) formation and propagation studies, being developed at LLNL under a Laboratory Directed R&D (LDRD) initiative that was launched in the fall of 2014. Furthermore, EMPulse builds upon the open-source Warp particle-in-cell code framework which was developed by members of this team and collaborators at other institutions. Our goal of this endeavor is a new tool, using methods different from those in common use, and enabling the detailed and self-consistent study of multidimensional effects in geometries that have typically been treated only approximately. We describe the underlying Warp framework and its capabilities; the models that have been or are being newly developed and incorporated into EMPulse, tests of these models, and number of approaches to increased computational efficiency that we are studying.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of a Plasma Thruster Utilizing the FRC Configuration

This report describes work performed by LLNL to model the behavior and performance of a reverse-field configuration (FRC) type of plasma device as a plasma thruster as summarized by Razin et al. [1], which also describes the MNX device at PPPL used to study this concept.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Studies of EMP generation using a Lienard-Wiechert formulation, and progress toward a 3-D EMP code

Here, we describe studies of the generation of electro-magnetic pulse (EMP) fields under the idealized conditions of a delta-function gamma pulse, a spherical cap of Compton electrons located at a common radius from the burst, and the absence of the conduction current. Various processes (geomagnetic rotation, drag, and scattering) contribute to the time derivative of the Compton current density, which appears as the source term in the Lienard–Wiechert expression for the radiation field. These processes are considered separately and in combination, and their influences on the waveform of the EMP assessed. Using a separate computational approach, different numerical models of multiple scattering are tested, in an effort to assess the validity of existing codes and earlier results. We also describe plans for and progress toward a comprehensive 3-D EMP code, which is to employ recently developed numerical methods and is to offer a variety of models, including the Lienard–Wiechert formulation described here.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multi-dimensional Vlasov simulations and modeling of trapped-electron-driven filamentation of electron plasma waves

Kinetic simulations of two-dimensional finite-amplitude electron plasma waves are performed in a one-wavelength long system. A systematic study of the most unstable linear sideband mode, in particular its growth rate γ and wavenumber k{sub y}, is carried out by scanning the amplitude and wavenumber of the initial wave. Simulation results are compared with numerical and analytical solutions to a two-dimensional nonlinear Schrödinger model [H. A. Rose and L. Yin, Phys. Plasmas 15, 042311 (2008)] and to the reduced model by Kruer et al. [Phys. Rev. Lett. 23, 838 (1969)] generalized to two dimensions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic simulations and reduced modeling of longitudinal sideband instabilities in non-linear electron plasma waves

Kinetic Vlasov simulations of one-dimensional finite amplitude Electron Plasma Waves are performed in a multi-wavelength long system. A systematic study of the most unstable linear sideband mode, in particular its growth rate γ and quasi- wavenumber δk, is carried out by scanning the amplitude and wavenumber of the initial wave. Simulation results are successfully compared against numerical and analytical solutions to the reduced model by Kruer et al. [Phys. Rev. Lett. 23, 838 (1969)] for the Trapped Particle Instability (TPI). A model recently suggested by Dodin et al. [Phys. Rev. Lett. 110, 215006 (2013)], which in addition to the TPI accounts for the so-called Negative Mass Instability because of a more detailed representation of the trapped particle dynamics, is also studied and compared with simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multilevel Monte Carlo simulation of Coulomb collisions

We present a new, for plasma physics, highly efficient multilevel Monte Carlo numerical method for simulating Coulomb collisions. The method separates and optimally minimizes the finite-timestep and finite-sampling errors inherent in the Langevin representation of the Landau–Fokker–Planck equation. It does so by combining multiple solutions to the underlying equations with varying numbers of timesteps. For a desired level of accuracy ε, the computational cost of the method is O(ε{sup −2}) or O(ε{sup −2}(lnε){sup 2}), depending on the underlying discretization, Milstein or Euler–Maruyama respectively. This is to be contrasted with a cost of O(ε{sup −3}) for direct simulation Monte Carlo or binary collision methods. We successfully demonstrate the method with a classic beam diffusion test case in 2D, making use of the Lévy area approximation for the correlated Milstein cross terms, and generating a computational saving of a factor of 100 for ε=10{sup −5}. We discuss the importance of the method for problems in which collisions constitute the computational rate limiting step, and its limitations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New insights into the decay of ion waves to turbulence, ion heating, and soliton generation

The decay of a single-frequency, propagating ion acoustic wave (IAW) via two-ion wave decay to a continuum of IAW modes is found to result in a highly turbulent plasma, ion soliton production, and rapid ion heating. Instability growth rates, thresholds, and sensitivities to plasma conditions are studied via fully kinetic Vlasov simulations. The decay rate of IAWs is found to scale linearly with the fundamental IAW potential amplitude ϕ{sub 1} for ZT{sub e}/T{sub i}≲20, beyond which the instability is shown to scale with a higher power of ϕ{sub 1}, where Z is the ion charge number and T{sub e} (T{sub i}) is the electron (ion) thermal temperature. The threshold for instability is found to be smaller by an order of magnitude than linear theory estimates. Achieving a better understanding of the saturation of stimulated Brillouin scatter levels observed in laser-plasma interaction experiments is part of the motivation for this study.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Higher-order time integration of Coulomb collisions in a plasma using Langevin equations

The extension of Langevin-equation Monte-Carlo algorithms for Coulomb collisions from the conventional Euler–Maruyama time integration to the next higher order of accuracy, the Milstein scheme, has been developed, implemented, and tested. This extension proceeds via a formulation of the angular scattering directly as stochastic differential equations in the fixed-frame spherical-coordinate velocity variables. Results from the numerical implementation show the expected improvement [O(Δt) vs. O(Δt{sup 1/2})] in the strong convergence rate both for the speed |v| and angular components of the scattering. An important result is that this improved convergence is achieved for the angular component of the scattering if and only if the “area-integral” terms in the Milstein scheme are included. The resulting Milstein scheme is of value as a step towards algorithms with both improved accuracy and efficiency. These include both algorithms with improved convergence in the averages (weak convergence) and multi-time-level schemes. The latter have been shown to give a greatly reduced cost for a given overall error level when compared with conventional Monte-Carlo schemes, and their performance is improved considerably when the Milstein algorithm is used for the underlying time advance versus the Euler–Maruyama algorithm. A new method for sampling the area integrals is given which is a simplification of an earlier direct method and which retains high accuracy. This method, while being useful in its own right because of its relative simplicity, is also expected to considerably reduce the computational requirements for the direct conditional sampling of the area integrals that is needed for adaptive strong integration.

97 MATHEMATICS AND COMPUTING↗

Simulations of drift resistive ballooning L-mode turbulence in the edge plasma of the DIII-D tokamak

Results from simulations of electromagnetic drift-resistive ballooning turbulence for tokamak edge turbulence in realistic single-null geometry are reported. The calculations are undertaken with the BOUT three-dimensional fluid code that solves Braginskii-based fluid equations [X. Q. Xu and R. H. Cohen, Contrib. Plasma Phys. 36, 158 (1998)]. The simulation setup models L-mode edge plasma parameters in the actual magnetic geometry of the DIII-D tokamak [J. L. Luxon et al., Fusion Sci. Technol. 48, 807 (2002)]. The computations track the development of drift-resistive ballooning turbulence in the edge region to saturation. Fluctuation amplitudes, fluctuation spectra, and particle and thermal fluxes are compared to experimental data near the outer midplane from Langmuir probe and beam-emission-spectroscopy for a few well-characterized L-mode discharges in DIII-D. The simulations are comprised of a suite of runs in which the physics model is varied to include more fluid fields and physics terms. The simulations yield results for fluctuation amplitudes, correlation lengths, particle and energy fluxes, and diffusivities that agree with measurements within an order of magnitude and within factors of 2 or better for some of the data. The agreement of the simulations with the experimental measurements varies with respect to including more physics in the model equations within the suite of models investigated. The simulations show stabilizing effects of sheared E × B poloidal rotation (imposed zonal flow) and of lower edge electron temperature and density.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Uncertainty Quantification in the Fusion Simulation Project Verification and Validation Activity

Uncertainty quantification (UQ) is an important component of any investigation of the behavior of a complex, multi-physics system. UQ is the complete study of the accuracy, reliability, and errors in deriving scientific inferences. UQ impacts both the experimental and modeling (analytical theory and numerical simulation) approaches to studying the behavior of complex systems. UQ is essential in quantifying the nature of model and code verification and validation. Although UQ is an evolving and expanding research area, there is much experience and many mature tools already in existence. Thus, a new undertaking like the Fusion Simulation Project, with goals to develop a suite of predictive computer models for complex magnetic fusion plasma behavior and to validate this suite against experimental observations, will need to make thorough use of existing UQ methodologies and motivate the development of new techniques. This document presents an overview of UQ including some examples of successful practices and some recommendations for defining UQ practices in the Fusion Simulation Project.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Lower hybrid drift instability at the inner edge of the ring current

Excitation of electrostatic waves around and above the lower hybrid frequency at the inner edge of the ring current is investigated. The model consists of cold plasmaspheric ions; hot, dilute, inhomogeneous ring current ions; and cold charge neutralizing electrons. It is shown that in the presence of a sufficiently large density gradient the coupling of the lower hybrid with the drift cyclotron harmonic mode destabilizes the plasma. Unstable interactions also occur at higher cyclotron harmonics when the lower hybrid is replaced by an ion Bernstein mode. Additional power at frequencies above the lower hybrid frequency is attributed to the thermal enhancement by the hot ring current ions, which increases with their density gradient. Particle simulations are conducted, and comparison to AMPTE data is discussed.

Roth, I.↗