Search NASA⌕ Search

Engineering topics

Cohen, Marvin L.

Publications and source records attributed to Cohen, Marvin L..

At least 19 records

Structure-property relations of oP32-Ge under pressure

The unit-cell parameters, systematic absences, and atomic parameters of the germanium allotrope oP32-Ge show continuous changes up to 6 GPa as shown by single-crystal diffraction analysis. Peak shape and diffuse scattering features remain about unchanged throughout the experiment. Hence, neither the average nor the defect structure behavior offers a structure-property explanation for pressure-induced superconductivity observed at about 2 GPa [1]. Angle dispersive x-ray diffraction reveals a sluggish transformation of oP32-Ge to the Ge-II polymorph, the transition begins around 8 GPa and is complete at 12 GPa, a behavior similar to that of Ge-I. The reconstructive transition was associated with the breakdown of crystals into a powder that was compressed to 32 GPa. Synchrotron infrared absorption measurements up to 8.5 GPa indicate an increase of the band gap of the oP32-Ge prior to its collapse at 8.5 GPa. We suggest that the onset of superconductivity is not associated with a major structural change or that such a change occurs in specific stress and temperature conditions.

Lavina, Barbara↗

Pressure-induced superconductivity in a novel germanium allotrope

High-pressure studies on elements play an essential role in superconductivity research, with implications for both fundamental science and applications. Here we report the experimental discovery of surprisingly low pressure driving a novel germanium allotrope into a superconducting state in comparison to that for α-Ge. Raman measurements revealed structural phase transitions and possible electronic topological transitions under pressure up to 58 GPa. Based on pressure-dependent resistivity measurements, superconductivity was induced above 2 GPa and the maximum T c of 6.8 K was observed under 4.6 GPa. Interestingly, a superconductivity enhancement was discovered during decompression, indicating the possibility of maintaining pressure-induced superconductivity at ambient pressure with better superconducting performance. Density functional theory analysis further suggested that the electronic structure of Ge (oP32) is sensitive to its detailed geometry and revealed that disorder in the β-tin structure leads to a higher T c in comparison to the perfect β-tin Ge.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropy and isotope effect in superconducting solid hydrogen

Elucidating the phase diagram of solid hydrogen is a key objective in condensed matter physics. Several decades ago, it was proposed that at low temperatures and high pressures, solid hydrogen would be a metal with a high superconducting transition temperature. This transition to a metallic state can happen through the closing of the energy gap in the molecular solid or through a transition to an atomic solid. Recent experiments have managed to reach pressures in the range of 400–500 GPa, providing valuable insights. There is strong evidence suggesting that metallization via either of these mechanisms occurs within this pressure range. Computational and experimental studies have identified multiple promising crystal phases, but the limited accuracy of calculations and the limited capabilities of experiments prevent us from determining unequivocally the observed phase or phases. Therefore, it is crucial to investigate the superconducting properties of all the candidate phases. Recently, we reported the superconducting properties of the C2/c-24, Cmca-12, Cmca-4 and I41/amd-2 phases, including anharmonic effects. Here, we report the effects of anisotropy on superconducting properties using Eliashberg theory. Then, we investigate the superconducting properties of deuterium and estimate the size of the isotope effect for each phase. We find that the isotope effect on superconductivity is diminished by anharmonicity in the C2/c-24 and Cmca-12 phases and enlarged in the Cmca-4 and I41/amd-2 phases. Our anharmonic calculations of the C2/c-24 phase of deuterium agree closely with the most recent experiment by Loubeyre et al (2022 Phys. Rev. Lett.29 035501), indicating that the C2/c-24 phase remains the leading candidate in this pressure range, and has a strong anharmonic character. These characteristics can serve to distinguish among crystal phases in experiment. Furthermore, expanding our understanding of superconductivity in pure hydrogen holds significance in the study of high-T c hydrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

1D Magnetic MX 3 Single-Chains (M = Cr, V and X = Cl, Br, I)

Magnetic materials in reduced dimensions are not only excellent platforms for fundamental studies of magnetism, but they play crucial roles in technological advances. The discovery of intrinsic magnetism in monolayer 2D van der Waals systems has sparked enormous interest, but the single-chain limit of 1D magnetic van der Waals materials has been largely unexplored. This paper reports on a family of 1D magnetic van der Waals materials with composition MX 3 (M = Cr, V, and X = Cl, Br, I), prepared in fully-isolated fashion within the protective cores of carbon nanotubes. Atomic-resolution scanning transmission electron microscopy identifies unique structures that differ from the well-known 2D honeycomb lattice MX 3 structure. Density functional theory calculations reveal charge-driven reversible magnetic phase transitions.

1D materials↗

Nonstoichiometric Salt Intercalation as a Means to Stabilize Alkali Doping of 2D Materials

Although doping with alkali atoms is a powerful technique for introducing charge carriers into physical systems, the resulting charge-transfer systems are generally not air stable. Here, in this paper, we describe computationally a strategy towards increasing the stability of alkali-doped materials that employs stoichiometrically unbalanced salt crystals with excess cations (which could be deposited during, e.g., in situ gating) to achieve doping levels similar to those attained by pure alkali metal doping. The crystalline interior of the salt crystal acts as a template to stabilize the excess dopant atoms against oxidation and deintercalation, which otherwise would be highly favorable. We characterize this doping method for graphene, NbSe 2 , and Bi 2 Se 3 and its effect on direct-to-indirect band gap transitions, 2D superconductivity, and thermoelectric performance. Salt intercalation should be generally applicable to systems which can accommodate this “ionic crystal” doping (and particularly favorable when geometrical packing constraints favor nonstoichiometry).

2-dimensional systems↗

Resonantly Enhanced Electromigration Forces for Adsorbates on Graphene

We investigate the electromigration forces for weakly bonded adsorbates on graphene by using density-functional based calculations. We find that the nature of electromigration forces on an adsorbate critically depends on the energy level alignment between the adsorbate state and the Fermi level of the graphene. For a resonant adsorbate, whose frontier orbitals lie close to the Fermi level, the electromigration force is dominated by the electron wind force that is strongly enhanced along the electron flow direction, irrespective of the sign of the adsorbate charge. For a nonresonant adsorbate, the electromigration force is essentially the direct force that depends on the adsorbate charge. We also show that the magnitude of electromigration forces can be continuously tunable through electrostatic gating for resonant adsorbates. Our results provide new insight for understanding and controlling how nanoscale objects behave in or on host materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetism and interlayer bonding in pores of Bernal-stacked hexagonal boron nitride

When single-layer h-BN is subjected to a high-energy electron beam, triangular pores with nitrogen edges are formed. Because of the broken sp 2 bonds, these pores are known to possess magnetic states. Here, we report on the magnetism and electronic structure of triangular pores as a function of their size. Moreover, in the Bernal-stacked h-BN (AB-h-BN), multilayer pores with parallel edges can be created, which is not possible in the commonly fabricated multilayer AA'-h-BN. Given that these pores can be manufactured in a well-controlled fashion using an electron beam, it is important to understand the interactions of pores in neighboring layers. We find that in certain configurations, the edges of the neighboring pores remain open and retain their magnetism, and in others, they form interlayer bonds. We present a comprehensive report on these configurations for small nanopores. We find that at low temperatures, these pores have near degenerate magnetic configurations, and may be utilized in magnetoresistance and spintronics applications. In the process of forming larger multilayer nanopores, interlayer bonds can form, reducing the magnetization. Yet, unbonded parallel multilayer edges remain available at all sizes. Understanding these pores is also helpful in a multitude of applications such as DNA sequencing and quantum emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Targeting One- and Two-Dimensional Ta–Te Structures via Nanotube Encapsulation

Fine control over material synthesis on the nanoscale can facilitate the stabilization of competing crystalline structures. In this report we demonstrate how carbon nanotube reaction vessels can be used to selectively create one-dimensional TaTe 3 chains or two-dimensional TaTe 2 nanoribbons with exquisite control of the chain number or nanoribbon thickness and width. Transmission electron microscopy and scanning transmission electron microscopy reveal the detailed atomic structure of the encapsulated materials. Complex superstructures such as multichain spiraling and apparent multilayer moirés are observed. The rare 2H phase of TaTe 2 (1H in monolayer) is found to be abundant as an encapsulated nanoribbon inside carbon nanotubes. The experimental results are complemented by density functional theory calculations for the atomic and electronic structure, which uncovers the prevalence of 2H-TaTe 2 due to nanotube-to-nanoribbon charge transfer and size confinement. Calculations also reveal new 1T' type charge density wave phases in TaTe 2 that could be observed in experimental studies.

36 MATERIALS SCIENCE↗

High temperature superconductivity in the candidate phases of solid hydrogen

As the simplest element in nature, unraveling the phase diagram of hydrogen is a primary task for condensed matter physics. As conjectured many decades ago, in the low-temperature and high-pressure part of the phase diagram, solid hydrogen is expected to become metallic with a high superconducting transition temperature. The metallization may occur via band gap closure in the molecular solid or via a transition to the atomic solid. Recently, a few experimental studies pushed the achievable pressures into the 400–500 GPa range. There are strong indications that at some pressure in this range metallization via either of these mechanisms occurs, although there are disagreements between experimental reports. Furthermore, there are multiple good candidate crystal phases that have emerged from recent computational and experimental studies which may be realized in upcoming experiments. Therefore, it is crucial to determine the superconducting properties of these candidate phases. In a recent study, we reported the superconducting properties of the C2/c-24 phase, which we believe to be a strong candidate for metallization via band gap closure. Here, we report the superconducting properties of the Cmca-12, Cmca-4 and I4 1 /amd-2 phases including the anharmonic effects using a Wannier function-based dense k-point and q-point sampling. Here we find that the Cmca-12 phase has a superconducting transition temperature that rises from 86 K at 400 GPa to 212 K at 500 GPa, whereas the Cmca-4 and I4 1 /amd-2 phases show a less pressure-dependent behavior with their T c in the 74–94 K and 307–343 K ranges, respectively. These properties can be used to distinguish between crystal phases in future experiments. Understanding superconductivity in pure hydrogen is also important in the study of high-T c hydrides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Prediction of high-temperature superconductivity in C2/c-24 solid hydrogen

Recent experimental developments in hydrogen-rich materials at high pressures have put this class of materials above others in the race toward room-temperature superconductivity. As it is the basis of all the materials in this class, the efforts to determine the properties of pure solid hydrogen at high pressures remain intense. Most notably, a recent experimental study of the metallization of hydrogen identified the crystal phase of the solid as the C2/c-24 molecular phase up to ~425 GPa [Loubeyre et al., Nature (London) 577, 631 (2020)10.1038/s41586-019-1927-3]. It is possible that the observed metallization is caused by band structure effects and not a structural phase transition, and the material remains in this crystal phase up to higher pressures [Dogan et al., J. Phys.: Condens. Matter 33, 03LT01 (2020)10.1088/1361-648X/abba8a]. Therefore, it is of crucial importance to determine the superconducting properties of the C2/c-24 phase. Here, we employ a Wannier function-based dense k-point and q-point sampling to compute the electron-phonon coupling and superconducting properties of molecular hydrogen in the C2/c-24 phase. We find that the material has a high superconducting transition temperature of 242 K at 500 GPa. We also find that the transition temperature rapidly increases with pressure in the 400-500-GPa range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultranarrow TaS 2 Nanoribbons

Imposing additional confinement in two-dimensional (2D) materials can yield further control over the associated electronic, optical, and topological properties. However, synthesis of ultra-narrow nanoribbons (NRs) remains a challenge, particularly for the transition metal dichalcogenides (TMDs), and synthesizing TMD NRs narrower than 50 nm has remained elusive. In this paper, we report the vapor-phase synthesis of ultra-narrow TaS 2 NRs. The NRs are grown within the hollow cavity of carbon nanotubes, thereby limiting their lateral dimensions and layer number, while simultaneously stabilizing them against the environment. The NRs reach the monolayer (ML) limit and exhibit widths as low as 2.5 nm. Atomic-resolution scanning transmission electron microscopy (STEM) reveals the detailed atomic structure of the ultra-narrow NRs and we observe a hitherto unseen atomic structure supermodulation phenomenon of ordered defect arrays within the NRs. First-principles calculations based on density functional theory (DFT) show the presence of flat bands, as well as edge- and boundary-localized states, and help identify the atomic configuration of the supermodulation. Nanotube-templated synthesis represents a unique, transferable, and broadly deployable route toward ultra-narrow TMD NR growth.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Anomalous behavior in high-pressure carbonaceous sulfur hydride

A new experimental study reported behavior in a high-pressure carbon-sulfur-hydrogen system that has been interpreted by the authors as superconductivity at room temperature. The sudden change of electrical resistance at a critical temperature and the change of the R vs. T behavior with an applied magnetic field point to superconductivity. This is a very exciting study in one of the most important areas of science, hence, it is crucial for the community to investigate these findings and hopefully reproduce these results. In this paper, we present calculations that expand upon the arguments put forth, and offer some speculations about physical mechanisms that might explain the observed data. Here, we show that there are errors in the analysis presented in the experimental paper, and with the correct analysis, the reported R vs. T data significantly deviate from the expected behavior. In particular, the extremely sharp change in resistance at the superconducting transition is not consistent with a strongly type II superconductor.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stabilization of NbTe 3 , VTe 3 , and TiTe 3 via Nanotube Encapsulation

The structure of MX 3 transition metal trichalcogenides (TMTs, with M a transition metal and X a chalcogen) is typified by one-dimensional (1D) chains weakly bound together via van der Waals interactions. This structural motif is common across a range of M and X atoms (e.g. NbSe 3 , HfTe 3 , TaS 3 ), but not all M and X combinations are stable. We report here that three new members of the MX 3 family which are not stable in bulk, specifically NbTe 3 , VTe 3 , and TiTe 3 , can be synthesized in the few- to single-chain limit via nano-confined growth within the stabilizing cavity of multi-walled carbon nanotubes. Transmission electron microscopy (TEM) and atomic-resolution scanning transmission electron microscopy (STEM) reveal the chain-like nature and the detailed atomic structure. The synthesized materials exhibit behavior unique to few-chain quasi-1D structures, such as multi-chain spiraling and a trigonal anti-prismatic rocking distortion in the single-chain limit. Density functional theory (DFT) calculations provide insight into the crystal structure and stability of the materials, as well as their electronic structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observed metallization of hydrogen interpreted as a band structure effect

A recent experimental study of the metallization of hydrogen tracked the direct band gap and vibron frequency via infrared measurements up to ~425 GPa (Loubeyre et al (2020 Nature 577 631). Above this pressure, the direct gap has a discontinuous drop to below the minimum experimentally accessible energy (~0.1 eV). The authors suggested that this observation is caused by a structural phase transition between the C2/c-24 molecular phase to another molecular phase such as Cmca-12. Here, through ab initio calculations of pressure dependent vibron frequency and direct band gap, we find that the experimental data is consistent with the C2/c-24 phase up to 425 GPa, and suggest that this consistency extends beyond that pressure. Specifically, we find that qualitative changes in the band structure of the C2/c-24 phase lead to a discontinuous drop of the direct band gap, which can explain the observed drop without a structural transition. In conclusion, this alternative scenario, which naturally explains the absence of hysteresis in the measurements, will hopefully motivate further experimental studies to ascertain the structure of the phase above the high pressure 'phase transition'.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic multilayer edges in Bernal-stacked hexagonal boron nitride

Single-layer h-BN is known to have edges with unique magnetism; however, in the commonly fabricated multilayer AA'-h-BN, edge relaxations occur that create interlayer bonds and eliminate the unpaired electrons at the edge. Recently, a robust method of growing the unconventional Bernal-stacked h-BN (AB-h-BN) has been reported. Here, we use theoretical approaches to investigate the nitrogen-terminated zigzag edges in AB-h-BN that can be formed in a controlled fashion using a high-energy electron beam. We find that these "open"edges remain intact in bilayer and multilayer AB-h-BN, enabling researchers potentially to investigate these edge states experimentally. We also investigate the thermodynamics of the spin configurations at the edge by constructing a lattice model that is based on parameters extracted from a set of first-principles calculations. We find that the edge spins in neighboring layers interact very weakly, resulting in a sequence of independent spin chains in multilayer samples. By solving this model using Monte Carlo simulations, we can determine nm-scale correlation lengths at liquid-N 2 temperatures and lower. At low temperatures, these edges may be utilized in magnetoresistance and spintronics applications.

1-dimensional spin chains↗

High-Performance Atomically-Thin Room-Temperature NO 2 Sensor

The development of room-temperature sensing devices for detecting small concentrations of molecular species is imperative for a wide range of low-power sensor applications. Here, we demonstrate a room-temperature, highly sensitive, selective, and reversible chemical sensor based on a monolayer of the transition metal dichalcogenide Re 0.5 Nb 0.5 S 2 . The sensing device exhibits thickness dependent carrier type, and upon exposure to NO 2 molecules, its electrical resistance considerably increases or decreases depending on the layer number. The sensor is selective to NO 2 with only minimal response to other gases such as NH 3 , CH 2 O, and CO 2 . In the presence of humidity, not only are the sensing properties not deteriorated, but also the monolayer sensor shows complete reversibility with fast recovery at room temperature. We present a theoretical analysis of the sensing platform and identify the atomically-sensitive transduction mechanism.

47 OTHER INSTRUMENTATION↗