Search NASA⌕ Search

Engineering topics

Coker, Eric N

Publications and source records attributed to Coker, Eric N.

Preparation of asymmetric porous materials

A method for preparing an asymmetric porous material by depositing a porous material film on a flexible substrate, and applying an anisotropic stress to the porous media on the flexible substrate, where the anisotropic stress results from a stress such as an applied mechanical force, a thermal gradient, and an applied voltage, to form an asymmetric porous material.

36 MATERIALS SCIENCE↗

Metal nanoparticles as a conductive catalyst

A metal nanocluster composite material for use as a conductive catalyst. The metal nanocluster composite material has metal nanoclusters on a carbon substrate formed within a porous zeolitic material, forming stable metal nanoclusters with a size distribution between 0.6-10 nm and, more particularly, nanoclusters with a size distribution in a range as low as 0.6-0.9 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Zeolite-templated Pt/C electrocatalysts

In an effort to reduce the amount of platinum required in low temperature fuel cells, we have prepared electrocatalysts of platinum nanoparticles-on-carbon through zeolite-templating methods. Several different zeolite structure-types, as well as clays and mesoporous silicas were investigated as hosts for the preparation of small Pt clusters through thermal decomposition of ion exchanged (NH{sub 3}){sub 4}Pt{sup 2+}. Several factors relating to cluster confinement and mobility influence cluster size, and clusters below 1 nm with narrow size distribution have been prepared. To enable electrochemical application, the pores of the Pt cluster-containing zeolite were filled with electrically conductive carbon via infiltration with carbon precursors, polymerization, and pyrolysis. The zeolite host was then removed by acid digestion, to leave a micro-/mesoporous Pt/C electrocatalyst possessing Pt clusters of controlled size. Preliminary electrochemical evaluation of these catalysts is reported. The energetics of thermal decomposition of (NH{sub 3}){sub 4}Pt{sup 2+} to form Pt clusters in zeolite X have been investigated through Differential Scanning Calorimetry, and apparent activation energies calculated. The relationship between (NH{sub 3}){sub 4}Pt{sup 2+} decomposition and conditions of calcination has been explored in an effort to better control Pt cluster sizes.

30 DIRECT ENERGY CONVERSION↗

Method for encapsulating nanoparticles in a zeolite matrix

A method for preparing a metal nanocluster composite material. A porous zeolitic material is treated with an aqueous metal compound solution to form a metal ion-exchanged zeolitic material, heated at a temperature ramp rate of less than 2.degree. C./min to an elevated temperature, cooled, contacted with an organic monomer and heating to induce polymerization, and heating the composite material to greater than 350.degree. C. under non-oxidizing conditions to form a metal nanocluster-carbon composite material with nanocluster sizes between approximately 0.6 nm and 10 nm.

Coker, Eric N↗