Search NASA⌕ Search

Engineering topics

Cole, Jason

Publications and source records attributed to Cole, Jason.

The Green's Function Model Intercomparison Project (GFMIP) Protocol

The atmospheric Green's function method is a technique for modeling the response of the atmosphere to changes in the spatial field of surface temperature. While early studies applied this method to changes in atmospheric circulation, it has also become an important tool to understand changes in radiative feedbacks due to evolving patterns of warming, a phenomenon called the “pattern effect.” To better study this method, this paper presents a protocol for creating atmospheric Green's functions to serve as the basis for a model intercomparison project, GFMIP. The protocol has been developed using a series of sensitivity tests performed with the HadAM3 atmosphere-only general circulation model, along with existing and new simulations from other models. Our preliminary results have uncovered nonlinearities in the response of the atmosphere to surface temperature changes, including an asymmetrical response to warming versus cooling patch perturbations, and a change in the dependence of the response on the magnitude and size of the patches. These nonlinearities suggest that the pattern effect may depend on the heterogeneity of warming as well as its location. These experiments have also revealed tradeoffs in experimental design between patch size, perturbation strength, and the length of control and patch simulations. The protocol chosen on the basis of these experiments balances scientific utility with the simulation time and setup required by the Green's function approach. Running these simulations will further our understanding of many aspects of atmospheric response, from the pattern effect and radiative feedbacks to changes in circulation, cloudiness, and precipitation.

54 ENVIRONMENTAL SCIENCES↗

AmeriFlux FLUXNET-1F US-Ced Cedar Bridge

This is the AmeriFlux Management Project (AMP) created FLUXNET-1F version of the carbon flux data for the site US-Ced Cedar Bridge. This is the FLUXNET version of the carbon flux data for the site US-Ced Cedar Bridge produced by applying the standard ONEFlux (1F) software. Site Description - Wildfires and prescribed fires are a common occurrence in the NJ Pinelands. Prior to a 1995 nonstand replacing wildfire, the stand was last burned in the very large wildfire in 1963. Plow lines were installed for fire control in December of 2007, followed by a prescribed burns in 2008 and 2013, conducted by the New Jersey Forest Fire Service. Pine looper defoliated the stand in 1998, and Gypsy moth defoliated the understory and deciduos oaks in 2007. Pitch Pines are largely unaffected by defoliation by Gypsy moth.

Skowronski, Nicholas S.↗

CERESMIP: a climate modeling protocol to investigate recent trends in the Earth's Energy Imbalance

The Clouds and the Earth's Radiant Energy System (CERES) project has now produced over two decades of observed data on the Earth's Energy Imbalance (EEI) and has revealed substantive trends in both the reflected shortwave and outgoing longwave top-of-atmosphere radiation components. Available climate model simulations suggest that these trends are incompatible with purely internal variability, but that the full magnitude and breakdown of the trends are outside of the model ranges. Unfortunately, the Coupled Model Intercomparison Project (Phase 6) (CMIP6) protocol only uses observed forcings to 2014 (and Shared Socioeconomic Pathways (SSP) projections thereafter), and furthermore, many of the ‘observed' drivers have been updated substantially since the CMIP6 inputs were defined. Most notably, the sea surface temperature (SST) estimates have been revised and now show up to 50% greater trends since 1979, particularly in the southern hemisphere. Additionally, estimates of short-lived aerosol and gas-phase emissions have been substantially updated. These revisions will likely have material impacts on the model-simulated EEI. We therefore propose a new, relatively low-cost, model intercomparison, CERESMIP, that would target the CERES period (2000-present), with updated forcings to at least the end of 2021. The focus will be on atmosphere-only simulations, using updated SST, forcings and emissions from 1990 to 2021. The key metrics of interest will be the EEI and atmospheric feedbacks, and so the analysis will benefit from output from satellite cloud observation simulators. The Tier 1 request would consist only of an ensemble of AMIP-style simulations, while the Tier 2 request would encompass uncertainties in the applied forcing, atmospheric composition, single and all-but-one forcing responses. We present some preliminary results and invite participation from a wide group of models.

54 ENVIRONMENTAL SCIENCES↗

Introduction to CAUSES: Description of weather and climate models and their near-surface temperature errors in 5-day hindcasts near the Southern Great Plains

We introduce the Clouds Above the United States and Errors at the Surface (CAUSES) project with its aim of better understanding the physical processes leading to warm screen-temperature biases over the American Midwest in many numerical models. In this first of four companion papers, 11 different models, from 9 institutes, perform a series of 5-day hindcasts, each initialised from reanalyses. After describing the common experimental protocol and detailing each model configuration, a gridded temperature data set is derived from observations and used to show that all the models have a warm bias over parts of the Midwest. Additionally, a strong diurnal cycle in the screen-temperature bias is found in most models. In some models the bias is largest around midday, while in others it is largest during the night. At the Department of Energy Atmospheric Radiation Measurement Southern Great Plains (SGP) site, the model biases are shown to extend several kilometers into the atmosphere. Finally, to provide context for the companion papers, in which observations from the SGP site are used to evaluate the different processes contributing to errors there, it is shown that there are numerous locations across the Midwest where the diurnal cycle of the error is highly correlated with the diurnal cycle of the error at SGP. This suggests that conclusions drawn from detailed evaluation of models using instruments located at SGP will be representative of errors that are prevalent over a larger spatial scale.

54 ENVIRONMENTAL SCIENCES↗

AmeriFlux US-Ced Cedar Bridge

This is the AmeriFlux version of the carbon flux data for the site US-Ced Cedar Bridge. Site Description - Wildfires and prescribed fires are a common occurrence in the NJ Pinelands. Prior to a 1995 nonstand replacing wildfire, the stand was last burned in the very large wildfire in 1963. Plow lines were installed for fire control in December of 2007, followed by a prescribed burns in 2008 and 2013, conducted by the New Jersey Forest Fire Service. Pine looper defoliated the stand in 1998, and Gypsy moth defoliated the understory and deciduos oaks in 2007. Pitch Pines are largely unaffected by defoliation by Gypsy moth.

Skowronski, Nicholas S.↗

AmeriFlux US-Slt Silas Little- New Jersey

This is the AmeriFlux version of the carbon flux data for the site US-Slt Silas Little- New Jersey. Site Description - Wildfires, prescribed fires, insect defoliation events and windstorms are the common disturbances in the NJ Pinelands. The oak-dominated forest at Silas Little Experimental Forest was most recently defoliated by Gypsy moth (Lymantria dispar L.) in 2006 to 2008, with complete defoliation occuring in 2007. Following this multi-year defoliation event, oak mortality was significant, and resulted in the death of approximately 20 % of the overstory oaks, and a similar reduction in stand biomass. Previous disturbances have included windstorms and earlier Gypsy moth defoliation events in the 1990's. The last major wildfire to occur at and near the Experimental Forest was in 1963. Since then, a number of prescribed fires have been conducted in the vicinity of the Silas Little flux site.

Clark, Kenneth↗

The impact of equilibrating hemispheric albedos on tropical performance in the HadGEM2-ES coupled climate model

Despite the fact that the southern hemisphere contains a far greater proportion of dark ocean than the northern hemisphere, the total amount of sunlight reflected from the hemispheres is equal. However, the majority of climate models do not adequately represent this equivalence. Here we examine the impact of equilibrating hemispheric albedos by various idealised methods in a comprehensive coupled climate model and find significant improvements in what have been considered longstanding and apparently intractable model biases. Monsoon precipitation biases almost vanish over all continental land areas, the penetration of monsoon rainfall across the Sahel and the west African monsoon “jump” become well represented, and indicators of hurricane frequency are significantly improved. The results appear not to be model specific, implying that hemispheric albedo equivalence may provide a fundamental constraint for climate models that must be satisfied if the dynamics driving these processes, in particular the strength of the Hadley cell, are to be adequately represented. Cross-equatorial energy transport is implicated as a crucial component that must be accurately modelled in coupled general circulation models. The results also suggest that the commonly used practice of prescribing sea-surface temperatures in models provides a less accurate represention of precipitation than constraining the hemispheric albedos.

54 ENVIRONMENTAL SCIENCES↗

Vertical structure and physical processes of the Madden-Julian Oscillation: Biases and uncertainties at short range

We present an analysis of diabatic heating and moistening processes from 12 to 36 h lead time forecasts from 12 Global Circulation Models as part of the “Vertical structure and physical processes of the Madden-Julian Oscillation (MJO)” project. A lead time of 12–36 h is chosen to constrain the large-scale dynamics and thermodynamics to be close to observations while avoiding being too close to the initial spin-up of the models as they adjust to being driven from the Years of Tropical Convection (YOTC) analysis. A comparison of the vertical velocity and rainfall with the observations and YOTC analysis suggests that the phases of convection associated with the MJO are constrained in most models at this lead time although the rainfall in the suppressed phase is typically overestimated. Although the large-scale dynamics is reasonably constrained, moistening and heating profiles have large intermodel spread. In particular, there are large spreads in convective heating and moistening at midlevels during the transition to active convection. Radiative heating and cloud parameters have the largest relative spread across models at upper levels during the active phase. A detailed analysis of time step behavior shows that some models show strong intermittency in rainfall and differences in the precipitation and dynamics relationship between models. In conclusion, the wealth of model outputs archived during this project is a very valuable resource for model developers beyond the study of the MJO. Additionally, the findings of this study can inform the design of process model experiments, and inform the priorities for field experiments and future observing systems.

54 ENVIRONMENTAL SCIENCES↗

Cloud system resolving modelling and 3D solar radiative transfer

Many cloud system resolving models (CSRMs), and large eddy models, at best, compute radiative transfer under cloudy conditions using the Independent Column Approximation (ICA). It is well known for solar radiative transfer use of the ICA, which suppresses horizontal transfer of radiation, can produce instantaneously large biases in fluxes and heating rates relative to more physically accurate 3D radiative transfer calculations. Although the instantaneous flux biases can be significant it is not clear whether they will affect significant changes within CSRMs which could influence the interpretation of CSRMs studies. To test the effect of 3D solar radiative transfer on a CSRM we coupled a broadband solar Monte Carlo radiative transfer model to a CSRM (System for Atmospheric Modelling version 6.5). Initial studies with 2D (only allowing variations along the x-z plane) version of the model suggested that using standard observationally constrained forcings were too strongly tied to the atmospheric and surface forcings. This would limit the interpretation of the role of radiation on the cloud system evolution at the large scale. To include some degree of feedback between the cloud systems and the large-scale environment we used a reasonably well resolved and large domain simulation so that a largescale circulation could develop in the CSRM.

54 ENVIRONMENTAL SCIENCES↗

The Continual Intercomparison of Radiation Codes: Results from Phase I

We present results from Phase I of the Continual Intercomparison of Radiation Codes (CIRC), intended as an evolving and regularly updated reference source for evaluation of radiative transfer (RT) codes used in Global Climate Models. CIRC differs from previous intercomparisons in that it relies on an observationally validated catalogue of cases. The seven CIRC Phase I baseline cases, five cloud-free, and two with overcast liquid clouds, are built around observations by the Atmospheric Radiation Measurements (ARM) program that satisfy the goals of Phase I, namely to examine radiative transfer (RT) model performance in realistic, yet not overly complex, atmospheric conditions. In addition to the seven baseline cases, additional idealized "subcases" are also examined to facilitate intrepretation of the causes of model errors. In addition to summarizing individual model performance with respect to reference line-by-line calculations and inter-model differences, we also highlight RT model behavior for conditions of doubled CO2, aspects of utilizing a spectral specification of surface albedo, and the impact of the inclusion of scattering in the thermal infrared. Our analysis suggests that RT models should work towards improving their calculation of diffuse shortwave flux, shortwave absorption, treatment of spectral surface albedo, and shortwave CO2 forcing. On the other hand, LW calculations appear to be significantly closer to the reference results. By enhancing the range of conditions under which participating codes are tested, future CIRC phases will hopefully allow even more rigorous examination of RT code performance.

radiative transfer, climate models, radiative forc↗

The Continual Intercomparison of Radiation Codes: Results from Phase I

The computer codes that calculate the energy budget of solar and thermal radiation in Global Climate Models (GCMs), our most advanced tools for predicting climate change, have to be computationally efficient in order to not impose undue computational burden to climate simulations. By using approximations to gain execution speed, these codes sacrifice accuracy compared to more accurate, but also much slower, alternatives. International efforts to evaluate the approximate schemes have taken place in the past, but they have suffered from the drawback that the accurate standards were not validated themselves for performance. The manuscript summarizes the main results of the first phase of an effort called "Continual Intercomparison of Radiation Codes" (CIRC) where the cases chosen to evaluate the approximate models are based on observations and where we have ensured that the accurate models perform well when compared to solar and thermal radiation measurements. The effort is endorsed by international organizations such as the GEWEX Radiation Panel and the International Radiation Commission and has a dedicated website (i.e., http://circ.gsfc.nasa.gov) where interested scientists can freely download data and obtain more information about the effort's modus operandi and objectives. In a paper published in the March 2010 issue of the Bulletin of the American Meteorological Society only a brief overview of CIRC was provided with some sample results. In this paper the analysis of submissions of 11 solar and 13 thermal infrared codes relative to accurate reference calculations obtained by so-called "line-by-line" radiation codes is much more detailed. We demonstrate that, while performance of the approximate codes continues to improve, significant issues still remain to be addressed for satisfactory performance within GCMs. We hope that by identifying and quantifying shortcomings, the paper will help establish performance standards to objectively assess radiation code quality, and will guide the development of future phases of CIRC

Oreopoulos, Lazaros↗

In-situ Thermal Treatment of Trichloroethene at Marshall Space Flight Center

This viewgraph presentation describes the in-situ thermal treatment of trichloroethene at Marshall space Flight Center. The contents include: 1) Background 1 and 2; 2) Source Area-13; 3) In-situ Thermal Treatment; 4) SA-13 Lithology; 5) SA-13 In-Situ Thermal TS; 6) SA-13 ISTD System Components; 7) ISTD Overview; 8) Heaters; 9) SA-13 ISTD Wellfield Layout; 10) SA-13 Well Field; 11) ISTD Process and Instrumentation; 12) Treatment Zone Temperature; 13) SA-13 System Removals; 14) SA-13 DNAPL (typical photos); 15) Treatment Results 1-5; and 16) SA-13 TCE Removal Summary.

Cole, Jason↗