Grain boundary strain localization in a CdTe solar cell revealed by scanning 3D X-ray diffraction microscopy
Scanning 3DXRD was used to visualize strain localization at grain boundaries with a high spatial resolution of 100 nm.
Shukla, Aditya↗
Engineering topics
Colegrove, Eric
Publications and source records attributed to Colegrove, Eric.
Distribution of Copper States, Phases, and Defects across the Depth of a Cu-Doped CdTe Solar Cell
Copper has been used as a p-type dopant in cadmium telluride (CdTe) for decades. However, the density of Cu atoms in the finished device is much higher than that of holes, which means that most Cu atoms are not activated as acceptors during incorporation. Furthermore, studies have demonstrated that the distribution of copper (Cu) atoms across the device is highly inhomogeneous, with reports citing Cu substitution on Cd sites and segregation to grain boundaries. Fast diffusion along these boundaries and Cu accumulation at the CdTe/CdS interface have also been observed and validated computationally. These levels of inhomogeneity make it difficult to accurately characterize and correlate the performance with the nature of the Cu atomic species present. To address this challenge, we utilize X-ray microscopy and, specifically, nanoscale fluorescence-mode X-ray absorption near-edge structure to resolve the atomic Cu environment throughout the depth of the CdTe layer. Our results suggest that the majority of Cu atoms are in the form of Cu x Te phases (or similar local environments) near the ZnTe|CdTe interface, Cu x O phases in the CdTe absorber, and present in various oxidation states, including Cu 1+ and Cu 2+ , near the CdS/CdTe junction. Here this work also provides experimental evidence for the first time of the presence of CuS around the ZnTe|CdTe interface and the hypothesized Cu Cd -Cl i complex in the CdTe absorber.
14 SOLAR ENERGY↗
Why Increased CdSeTe Charge Carrier Lifetimes and Radiative Efficiencies did not Result in Voltage Boost for CdTe Solar Cells
After a focused effort over the last decade, order-of-magnitude improvements in doping and electro-optical characteristics (radiative efficiency, carrier lifetime, and passivation) have been reported for polycrystalline CdSeTe solar cells. Surprisingly, this did not result in higher solar cell voltages regardless of device contacting layers, absorber grading profiles, and other changes in device architecture. From detailed evaluation of radiative emission and carrier dynamics in CdSeTe heterostructures and devices, it is shown that the complexity introduced to the absorber to achieve lifetime and passivation metrics resulted in charge carrier trapping, which now negatively affects CdSeTe absorbers.
CdTe↗
Nanometer-scale electrical potential imaging on absorber of CdSeTe solar cells
Here, we report on nm-scale electrical potential imaging throughout As-doped and Cu-doped CdSeTe absorbers using Kelvin probe force microscopy (KPFM). The potential imaging was conducted both laterally and vertically on beveled films using ion milling at small glancing angle. KPFM images electrical potential on the beveled surface and assesses defect charging in the subsurface region within a screening length from the beveled surface. We found that the grain boundaries were positively charged and that there were significant potential fluctuations in both grain boundary versus grain interior and intragrain. We further found that these potential fluctuations decreased significantly toward the front interface. Time of flight secondary ion mass spectrometry imaging shows that Se content increased toward the front interface, consistent with Se passivation of defects. The potential fluctuation was induced by defect charging, and the results elucidate different details of the defect configurations and grain structures of the films with different CdCl 2 treatment temperatures in the As-doped CdSeTe. The defect configurations in the region near the front interface can be a main factor contributing to the device performance difference. Our potential imaging provides insights about the defects throughout the absorber films, and shows that the potential fluctuation has a direct correlation to the V oc deficit.
14 SOLAR ENERGY↗
Quantitative analysis of Cu XANES spectra using linear combination fitting of binary mixtures simulated by FEFF9
We report x-ray absorption near edge structure (XANES) is a powerful tool to probe the fingerprint of local structures, and when coupled with X-ray microscopy, the small spot size enables one to probe very specific regions of interest in a device or material, e.g. interfaces/bulk, different grains, good/bad electrical areas. In this work, we investigate the use of linear combination fitting (LCF) of XANES spectra for the particular case of Cu doping in CdTe. We show that the experimental data seem to be accurately represented by standards of Cu 2 Te and its substoichiometric counterpart, Cu 1.43 Te. We use Cu in CdTe as a case study to evaluate the accuracy of linear combination fitting using simulated standards, given that experimental standards for certain phases (e.g. Cu 1.43 Te) or defect structures (e.g. vacancies) cannot be readily obtained. We discuss how spectral features of the FEFF9-simulated standards, fitting ranges, and noise levels all dictate the accuracy of this type of analysis. We show that the greater the spectral difference between the two standards, the better the LCF is able to differentiate between the two structures and to tolerate experimental noise. Finally, we estimate the error of the fitted weights for different spectral features and noise levels and propose a framework to study local structures semi-quantitatively by using binary mixtures of FEFF9-simulated standards.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Revealing the Importance of Front Interface Quality in Highly Doped CdSe x Te 1– x Solar Cells
Not Available
14 SOLAR ENERGY↗
The nanoscale distribution of copper and its influence on charge collection in CdTe solar cells
For decades, Cu has been the primary dopant in CdTe photovoltaic absorbers. Typically, Cu acceptor concentrations in these devices are on the order of 1 1014 cm-3, which has made it notoriously difficult to directly correlate nanoscale Cu distributions to the local charge transport properties of these devices. To measure and correlate these properties, measurement techniques require high sensitivity to elemental concentration, large penetration depth, and operando compatibility. Techniques such as secondary-ion mass spectroscopy and X-ray energy dispersive spectroscopy are widely adopted to measure Cu concentrations, but they are limited by penetration depth, sensitivity, or spatial resolution. Additionally, they lack the operando capabilities required to correlate one-to-one Cu concentrations to electrical performance. In this work, correlative X-ray microscopy is used to investigate the spatial distribution of Cu and its impact on charge collection through the depth and breadth of CdTe photovoltaic devices. Plan-view, nanoscale X-ray fluorescence maps clearly demonstrate the spatial segregation of copper around regions thought to be CdTe grain boundaries. Complementary cross-section imaging unveils the transition of the maximum charge-collection efficiency from the ZnTe-CdTe interface to the CdS-CdTe interface as a function of Cu incorporation. The copper concentration through the depth of the CdTe layer is characterized by slow and fast diffusion components, and cross-section charge-transport modeling shows that the experimentally obtained charge collection can be explained by the modeled acceptor distribution through the depth of the CdTe layer.
14 SOLAR ENERGY↗
Unraveling Cu Chemical Signature in CdTe by Spectral Fluorescence Mapping
X-ray absorption spectroscopy (XAS) has been shown to be a powerful tool to unravel the chemical environment of a given atom within a matrix. When used in correlative X-ray microscopy approaches, XAS allows one to probe with nanoscale precision regions of particular interest in an absorber. Herein, we use X-ray absorption near edge structure (XANES) to evaluate the chemical environment of Cu atoms within a CdTe solar cell. The reconstruction of XANES spectra from XRF maps have unfolded 2D maps of Cu chemical structures. In this work, we found that most Cu atoms exist in Cu 2 Te and Cu 1.4 Te phase. Moreover, we found traces of CuTe, Cu 2 O, CuO, Cu 2 S, CuS, and metallic Cu phase. Investigating Cu chemical structures at different performing areas, we found no observable correlation between Cu chemical structures and electrical performance. This approach allows tracking of Cu chemical structures along with electrical performance and elemental distribution simultaneously, with high spatial resolution in a statistically practical way.
CdTe↗
Exceeding 200 ns Lifetimes in Polycrystalline CdTe Solar Cells
CdTe photovoltaics has achieved one of the lowest levelized costs of electricity among all energy sources. However, for decades, carrier lifetimes have been inferior to those of other prevalent solar cell materials. This quality has inhibited common methods to improve solar cell efficiency such as back-surface fields, electron reflectors, or bifacial solar cells. In this work, a significant increase in carrier lifetime to values exceeding 200 ns in fully functional CdTe solar cells is demonstrated. The increased lifetime is achieved by large CdSeTe grains at the absorber/emitter interface, intragrain passivation in the absorber layer, and chemical passivation by forming nanoscale oxidized tellurium species at the transparent conducting oxide interface. The carrier lifetime is correlated to the open-circuit voltage and enables paths for back-surface manipulation and novel cell architectures to further improve CdTe photovoltaic performance.
14 SOLAR ENERGY↗
3D/2D passivation as a secret to success for polycrystalline thin-film solar cells
Not Available
14 SOLAR ENERGY↗
Copper Defects and Charge Collection in Cadmium Telluride Photovoltaic Devices
In CdTe photovoltaic devices, the CdTe layer must be doped with Cu to reduce its resistivity, increase carrier lifetime, and improve hole transport. However, the Cu concentration is typically very low around the interfaces and within the CdTe layer, making it difficult to determine the influence Cu has on charge transport at the nanoscale; Cu concentrations are difficult to detect due to low ionization probability of Cu atoms [1]. Here, we use synchrotron X-ray microscopy to probe the nanoscale distribution of Cu and correlate it to local charge collection in CdTe photovoltaic devices. We demonstrate Cu segregation around grain boundaries, and, using cross-section charge collection measurements and transport modelling, show recombination center concentration in the CdTe layer dictates the interface at which charge collection occurs. The work gives insights on how Cu distributes in CdTe photovoltaic systems, and an understanding of how these distributions affect charge transport.
Walker, Trumann↗
Optimization of Source Material for in-situ Arsenic Doping via Vapor Transport Deposition of CdTe Films
In-situ doping of CdTe/CdSeTe films with arsenic is performed using pre-doped source material prepared by high pressure Bridgman (HPB) melt growth. Arsenic level in the source material is varied from 1018-1020 cm-3. Correspondingly, dopant incorporation in the films prepared using vapor transport deposition (VTD) varied from 3x1017 cm-3–1x1018cm-3. In this range, dopant activation is found to inversely correlate with the dopant incorporation, suggesting compensation. The results from this study indicate film properties can be adjusted by source material.
41 EE - Solar Energy Technologies Office (EE-4S)↗
Cu-Local Structures and Their Relation with Nanoscale Electrical Performance in CdTe
For decades, copper has been introduced in CdTe devices to improve overall performance (open circuit voltage, fill factor, and series resistance). While multiple articles have reported on Cu-based defects, very little is known about how the local structure around the copper atom affects electrical performance. Using X-ray Absorption Near Edge Structure (XANES) coupled with X-ray microscopy we investigate good and poor performing region in Cu-doped CdTe devices. Our XANES coupled with theoretical standards by FEFF9 suggest that CU 2 Te phase and Cu Cd may be responsible for the high electrical performance of the regions under study. This correlation of structure-performance at the nanoscale offers a unique framework to understand and tune processes with deep implications to the overall electrical performance of the solar cell.
CdTe↗
Mapping Current Collection in Cross Section: The Case of Copper-Doped CdTe Solar Cells
For decades, copper has been used to improve the performance of cadmium telluride thin film solar cells. However, it has also been shown to be the main cause of metastability in CdTe. Recently a low activation energy has been reported for the thermal diffusion of Cu in CdTe explaining the ease of motion that it has under moderate temperatures. The community consensus is that copper segregates to the absorber grain boundaries, where it's either beneficial or detrimental to device performance depending on its concentration. Using nanoscale X-ray micrsocopy and a two-dimensional drift-diffusion model we present a preliminary correlation between local copper distribution and electrical performance of a single-junction CdTe/CdS solar cell.
CdTe↗
Se diffusion in CdTe thin films for photovoltaics
Manipulating CdSeTe bandgrading to enhance photocurrent and carrier lifetime is an essential part of high-performance CdTe photovoltaics (PVs). Here, we examine Se diffusion kinetics in single-crystal and polycrystalline CdTe during deposition, thermal annealing, and CdCl 2 treatments. Se distributions are determined by dynamic secondary-ion-mass spectroscopy and Auger electron spectroscopy depth profiling and coupled with electron backscatter diffraction images of the crystalline structure. Effective bulk and grain boundary diffusion coefficients are determined by analytical models and discussed in the context of processing and film morphology. Se is found to diffuse in CdTe at much higher rates during CdCl 2 treatments than with thermal processing alone. GB diffusion also occurs at a significantly faster rate than bulk diffusion. As a result of these two effects, the near interface bulk and GB Se diffusion during CdCl 2 treatments dominates the bandgrading profiles in CdTe PVs.
71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
Direct Microscopy Imaging of Nonuniform Carrier Transport in Polycrystalline Cadmium Telluride
Not Available
75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
Roles of bandgrading, lifetime, band alignment, and carrier concentration in high-efficiency CdSeTe solar cells
CdSeTe alloying has significantly increased the efficiency of CdTe-based solar technology. Here, computational modeling compares how different CdSeTe bandgrading, carrier lifetimes, band alignment, and carrier concentrations contribute to transport, recombination, and performance. We find that the gain in photocurrent caused by bandgap narrowing alone is insufficient to describe experimental efficiency gains. Performance can be increased by adjusting CdSeTe compositions and bandgrading depths. However, these performance gains are small relative to the contributions of enhanced lifetime by Se alloying, which can explain record cell efficiency gains with minimal open-circuit voltage loss despite significant bandgap narrowing. Similarly, CdSeTe band alignment shifts can significantly increase performance if front interface recombination is prevalent. For a wide range of CdSeTe grading profiles, the hole density is a critical component to achieve efficiencies exceeding 25%.
36 MATERIALS SCIENCE↗