Search NASA⌕ Search

Engineering topics

Collinge, Gregory B.

Publications and source records attributed to Collinge, Gregory B..

Dynamic Copper Site Redispersion through Atom Trapping in Zeolite Defects

Single-site copper-based catalysts have shown remarkable activity and selectivity for a variety of reactions. However, deactivation by sintering in high-temperature reducing environments remains a challenge and often limits their use due to irreversible structural changes to the catalyst. Here, we report zeolite-based copper catalysts in which copper oxide agglomerates formed after reaction can be repeatedly redispersed back to single sites using an oxidative treatment in air at 550 °C. Under different environments, single-site copper in Cu–Zn–Y/deAlBeta undergoes dynamic changes in structure and oxidation state that can be tuned to promote the formation of key active sites while minimizing deactivation through Cu sintering. For example, single-site Cu 2+ reduces to Cu 1+ after catalyst pretreatment (270 °C, 101 kPa H 2 ) and further to Cu0 nanoparticles under reaction conditions (270–350 °C, 7 kPa EtOH, 94 kPa H 2 ) or accelerated aging (400–450 °C, 101 kPa H 2 ). After regeneration at 550 °C in air, agglomerated CuO was dispersed back to single sites in the presence and absence of Zn and Y, which was verified by imaging, in situ spectroscopy, and catalytic rate measurements. Ab initio molecular dynamics simulations show that solvation of CuO monomers by water facilitates their transport through the zeolite pore, and condensation of the CuO monomer with a fully protonated silanol nest entraps copper and reforms the single-site structure. Importantly, the capability of silanol nests to trap and stabilize copper single sites under oxidizing conditions could extend the use of single-site copper catalysts to a wider variety of reactions and allows for a simple regeneration strategy for copper single-site catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Cu Species in Dealuminated Beta Zeolite Studied by Operando Closed-Cell Gas Reaction STEM

Direct conversion of ethanol to C3+ olefins is an attractive pathway to produce sustainable aviation fuels [1]. We recently reported a copper-containing catalyst supported on dealuminated (DeAl) beta zeolite that is capable of catalyzing cascade ethanol to olefins reactions with high olefins selectivity (88% C3+ olefin selectivity at 100% ethanol conversion). However, one of the deactivation mechanisms of the catalyst is copper sintering [2]. It was found that copper agglomerates can be redispersed through a simple oxidative treatment. To better understand the kinetics and process conditions conducive to redispersion, we studied the atmosphere and temperature dependent Cu species in Cu/DeAl-Beta catalyst under conditions matching those of the working catalyst.

beta zeolite↗

Insights into Acetic Acid Binding and Ketene Formation on Anatase TiO 2 (101)

Understanding the adsorption and reactivity of carboxylic acids on oxide surfaces is of great interest in catalysis for biomass upgrading via ketonization, a carbon–carbon coupling reaction. Herein, we investigate the adsorption and reaction of acetic acid on anatase TiO 2 (101) using scanning tunneling microscopy, infrared spectroscopy, temperature programmed reaction, and density functional theory calculations. We demonstrate the adsorption of acetic acid can form two intermediates: (1) dissociated, bidentate acetate with an associated bridging hydroxyl, and (2) molecular, monodentate acetic acid. The coexistence of ordered phases with increasing monolayer (ML) saturation coverages consisting of (1) pure acetate (0.5 ML), (2) mixed acetate/acetic acid (0.67 ML), (3) mixed acetate/acetic acid (1.0 ML) and (4) pure acetic acid demonstrates similar energetics for both acetate and acetic acid species. Under ultra-high vacuum conditions, the presence of both monodentate acetic acid and bidentate acetate was observed below room temperature, while solely bidentate acetate was observed up to 575 K. The deprotonation of acetic acid produces water at 280 K, while the thermal decomposition of bidentate acetate produces ketene and acetic acid at 645 K. In conclusion, this model study provides detailed insight into the stability and reactivity of carboxylic acid surface-bound intermediates, which could participate during ketonization reactions for biomass upgrading.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stable Catalysts for Combined Dry and Steam Reforming of Methane and Carbon Dioxide

The specific aim of this project is to develop a comprehensive understanding of cheaper and more stable methane and carbon dioxide reforming catalysts with an optimal introduction of steam to reduce carbon deposits that typically prevent the catalytic systems from transferring to commercial implementation. The work was proposed as a two-year project with the end goal of to show a reliable catalyst system run for at least 400 hours at temperatures less than 800 °C with less than 5% loss of activity of the catalyst and a carbon monoxide to hydrogen product ratio of at least 1:1. The project went for one-year and met the end of year milestone by developing two strategies (use of a cerium co-catalyst and introducing 5% water) that reduced the carbon deposition rates by at least 20% relative to the baseline 10% NiMgAlO methane reforming of CO 2 at < 800 °C in order to shown technical feasibility of the concept.

36 MATERIALS SCIENCE↗

Assessing entropy for catalytic processes at complex reactive interfaces

When chemical reactions are accelerated by a catalyst, entropy differences between reactants and their transient intermediates can be the driving force behind the promotion or inhibition of desired and parasitic chemical pathways. Understanding and controlling catalytic processes therefore requires both a fundamental and practicable understanding of entropy in addition to enthalpy. In unstructured media such as the vapor phase equilibrated with sparsely covered surfaces, entropy can be adequately accounted for by well-established approaches based on translational, rotational, and harmonic vibrational partition functions. However, these approximations become inadequate in more complex condensed phase environments, e.g., solid liquid interfaces of confined reaction spaces. In this chapter, we provide an overview of the state-of-art in the computational quantification of entropy and its known ramifications on catalysis. The fundamental roles of thermodynamics and kinetics in catalysis are covered in enough detail to appreciate and contextualize the computational methods employed to compute chemically accurate estimates of entropy. These methods are discussed in appropriate detail and range from the ubiquitous harmonic oscillator approximation where entropy unrelated to high frequency oscillations is typically underestimated, to enhanced free energy sampling with molecular dynamics where the desired accuracy must be weighed against the associated computational cost of obtaining it. The rising importance of machine learning and artificial intelligence in accelerating methodological progress in this field is touched upon, as well. Finally, applications, successes, and pitfalls of using these methods are provided to showcase past and present accomplishments while clarifying where improvements in both understanding and methodology are still needed.

Kollias, Loukas↗

Ab initio molecular dynamics with enhanced sampling in heterogeneous catalysis

Ab initio molecular dynamics simulations combined with enhanced sampling techniques are becoming widespread methods to investigate chemical phenomena in catalytic systems. These techniques automatically include finite temperature effects, anharmonicity, and collective dynamics in their robust description of enthalpic and entropic contributions, which can have significant impact on reaction free energy landscapes. This contrasts with standard ab initio static approaches that are based on assessing reaction free energies from various coarse-grained descriptions of the reaction potential energy surface. Enhanced sampling ab initio molecular dynamics opens the way to first principles simulations of systems of increasing complexity like solid/liquid catalytic interfaces. Here, we aim at guiding the reader through the basis of these techniques, summarizing their fundamental theoretical and practical aspects, and reviewing the relevant literature in the field. After a brief introduction to the problem, we will illustrate the advantage of using molecular simulations to include finite temperature effects, examine the most common ab initio techniques currently in use, describe their application to solid state heterogeneous catalysts, and finally critically review the most popular enhanced sampling techniques used in computational catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Binding and stability of MgO monomers on anatase TiO 2 (101)

In catalysis, MgO is often used to modify the acid-base properties of support oxides and to stabilize supported metal atoms and particles on oxides. In this study, we show how the sublimation of MgO powder can be used to deposit MgO monomers, hither on anatase TiO 2 (101). A combination of X-ray electron spectroscopy, high-resolution scanning tunneling microscopy, and density functional theory is employed to gain insight into the MgO monomer binding, electronic and vibrational properties, and thermal stability. In the most stable configuration, the Mg and O of the MgO monomer bind to two surface oxygens and one undercoordinated surface titanium, respectively. The additional binding weakens the Mg-O monomer bond and makes the Mg more ionic. The monomers are thermally stable up to 650 K, where the onset of diffusion into the TiO 2 bulk is observed. Finally, the monomeric MgO species on TiO 2 (101) represent an ideal, atomically precise system with modified acid-base properties and will be employed in our future catalytic studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Guiding the design of oxidation-resistant Fe-based single atom alloy catalysts with insights from configurational space

The high activity and selectivity of Fe-based heterogeneous catalysts toward a variety of reactions that require the breaking of strong bonds are offset in large part by their considerable instability with respect to oxidative deactivation. While it has been shown that the stability of Fe catalysts is considerably enhanced by alloying them with precious metals (even at the single-atom limit), rational design criteria for choosing such secondary metals are still missing. Since oxidative deactivation occurs due to the strong binding of oxygen to Fe and reduction by adsorbed hydrogen mitigates the deactivation, we propose here to use the binding affinity of oxygen and hydrogen adatoms as the basis for rational design. As it would also be beneficial to use cheaper secondary metals, we have scanned over a large subset of 3d–5d mid-to late transition metal single atoms and computationally determined their effect on the oxygen and hydrogen adlayer binding as a function of chemical potential and adsorbate coverage. We further determine the underlying chemical origins that are responsible for these effects and connect them to experimentally tunable quantities. Our results reveal a reliable periodic trend wherein oxygen binding is weakened greatest as one moves right and down the periodic table. Hydrogen binding shows the same trend only at high (but relevant) coverages and otherwise tends to have its binding slightly increased in all systems. Trends with secondary metal coverage are also uncovered and connected to experimentally tunable parameters.

Hensley, Alyssa↗

Mechanistic understanding of catalytic conversion of ethanol to 1-butene over 2D-pillared MFI zeolite

Ethanol is an important C2 platform molecule for producing value-added chemicals and distillate hydrocarbon fuels (e.g., jet and diesel). Among these, catalytic upgrading of ethanol to butenes can generate valuable commodity chemicals (e.g., 1-butene) and provide C4 olefin intermediates that can be further upgraded to jet/diesel fuels. 2D zeolites offer hierarchical mesoporous structures, leading to improved mass transport and reduced diffusion length, which can help to address the coking challenges faced by ethanol conversion to hydrocarbons over 3D zeolites. In this study, we investigate the acid-catalyzed conversion of ethanol to 1-butene over the Brønsted acid sites (BAS) in 2D-pillared MFI zeolite (2D-PMFI) using ab initio molecular dynamics (AIMD) simulations, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and calorimetric measurements. A detailed thermodynamic analysis, using quasi-harmonic approximation (QHA), on the Gibbs free energy pathway of ethanol conversion shows that the consideration of entropy is critical to accurately capture the detailed thermodynamic profiles. The formation of bulky ethoxy-ethene complex is found to be a potential rate-determining step (RDS), proceeding via stepwise mechanism. The reactivity of 2D-PMFI can be further tuned by manipulating RDS through a careful control of number of BAS and operating temperatures. The accuracy of computational model is confirmed through the comparison of calculated vibrational density of states (VDOS) against the experimental DRIFTS measurements. Overall, our study provides mechanistic insights into ethanol upgrading over the 2D-PMFI and shows the importance of evaluating entropic effects in such confined system.

Ethanol conversion, 2D-pillared zeolite, MFI, Anha↗

Promoting the cleavage of C-O bonds at the interface between a metal oxide cluster and a Co(0001) support

As a first step toward the rational design of Co-based catalysts with a higher activity and selectivity, we determine how one can activate a C-O bond at the interface between a metal oxide cluster and a Co(0001) support. The hypothesis here is that the metal ions in metal oxide clusters on a Co(0001) support enhance the adsorption of CO and weaken the C-O bond strength, which can then facilitate the dissociation of the CO reactant. To test this hypothesis, we developed three computational models of Ti4O8/Co(0001), Zr4O8/Co(0001), and Mn8O8/Co(0001). We quantify the CO adsorption behavior at the interface sites between an oxide cluster and the Co(0001) support as well as the corresponding IR spectra. We correlate the computed CO stretch frequencies with their CO adsorption energies, as well as the CO stretch frequency with the C-O bond length, and related these findings to the changes in the chemical bonding in the bound CO. The interface is the most favorable site for CO adsorption. Adsorption results in an increase of the C-O bond length and a decrease in its vibrational frequency. From a chemical bonding analysis, the bond order in CO at this site drops from 3 (in the gas phase) to 1. This decrease in bond order is a necessary precursor stage for CO dissociation. The experimental measurements of the corresponding FTIR spectra support this point. The favorability of CO adsorption at the interface sites is due to an electron transfer from the metal ion in the metal oxide cluster to the O atom in CO. We establish a linear relationship between C-O bond length and CO frequency and this relationship is found to be independent of the support, type of metal oxide cluster, or the adsorption site.

Fischer-Tropsch Synthesis, Heterogeneous Catalysis↗

Selective acetylene hydrogenation over single metal atoms supported on Fe 3 O 4 (001): A first-principle study

Supported single-atom catalysts (SACs) have gained increasing attention for improved catalytic activity and selectivity for industrially-relevant reactions. In this study, we explore the hydrogenation of acetylene over single Pt, Ru, Rh, Pd, and Ir atoms supported on the Fe 3 O 4 (001) surface using density functional theory (DFT) calculations. The thermodynamic profile of H diffusion is significantly changed with the type of single metal atoms used and suggests that H spillover from the single atom dopant to the Fe 3 O 4 (001) surface is favored and will likely lead to high H coverages in the functioning catalyst. Correspondingly, as the surface H coverage increases, the important desorption step of ethylene becomes energetically competitive against the detrimental hydrogenation steps of ethylene to ethane. Overall, we show herein that the selectivity of SACs towards ethylene production can be tuned by considering the proper type of metal and controlling the redox state of the support.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Single Atom Catalysis: An Analogy between Heterogeneous and Homogeneous Catalysts

In recent years, enormous efforts have been invested to improve the atom-efficiency of metal catalysts by decrease the size of metal particles to the limit of isolated atoms in heterogenous catalysis, termed single atom catalysts (SACs). In addition to being atom-efficient, these SACs are increasingly gaining attention due to the unique reactivity and selectivity they have exhibited in industrially relevant reactions, including both oxidation and hydrogenation reactions. Clear parallels can be drawn between heterogeneous SACs and their analogous homogeneous catalysts. In this chapter, we highlight SACs that demonstrate this relationship and report on relevant, recent developments in the field of single atom catalysis.

Yuk, Simuck F.↗

Benchmarking the accuracy of coverage-dependent models: adsorption and desorption of benzene on Pt (111) and Pt 3 Sn (111) from first principles

Bimetallic catalysts have demonstrated properties favorable for upgrading biofuel through catalytic hydrodeoxygenation. However, the design and optimization of such bimetallic catalysts requires the ability to construct accurate, predictive models of these systems. To generate a model that predicts the kinetic behavior of benzene adsorbed on Pt (111) and a Pt 3 Sn (111) surface alloy (Pt 3 Sn (111)), the adsorption of benzene was studied for a wide range of benzene coverages on both surfaces using density functional theory (DFT) calculations. The adsorption energy of benzene was found to correlate linearly with benzene coverage on Pt (111) and Pt 3 Sn (111); both surfaces exhibited net repulsive lateral interactions. Through an analysis of the d-band properties of the metal surface, it was determined that the coverage dependence is a consequence of the electronic interactions between benzene and the surface. The linear coverage dependence of the adsorption energy allowed us to quantify the influence of the lateral interactions on the heat of adsorption and temperature programmed desorption (TPD) spectra using a mean-field model. A comparison of our simulated TPD to experiment showed that this mean-field model adequately reproduces the desorption behavior of benzene on Pt (111) and Pt 3 Sn (111). In particular, the TPD correctly exhibits a broadening desorption peak as the initial coverage of benzene increases on Pt (111) as well as and a low temperature desorption peak on Pt 3 Sn (111). Furthermore, due to the sensitivity of the TPD peak temperature to the desorption energy, precise alignment of experimental and theoretical TPD spectra demands an accurate calculation of the adsorption energy. Therefore, an analysis of the effect of the exchange-correlation functional on TPD modeling is presented. Through this work, we show the necessity of incorporating lateral interactions into theoretical models in order to correctly predict experimental behavior.

09 BIOMASS FUELS↗

Modeling the adsorbate coverage distribution over a multi-faceted catalytic grain in the presence of an electric field: O/Fe from first principles

The impact of an external electric field on the concerted behavior of oxygen over a multi-faceted catalytic Fe grain is determined via the interpolation of ab initio models of oxygen adsorption on Fe(100), Fe(110), and Fe(111) in the presence of an external electric field. The application of both negative and positive electric fields weaken the adsorption strength for oxygen on all three surface facets, with Fe(110) experiencing the greatest effect. Kinetic models of a multi-faceted catalytic Fe grain show that the average oxygen coverage over the grain surface is reduced under the influence of both a negative and positive electric field, which are consistent with phase diagram results at comparable pressures. Furthermore, we show that there is a weak synergistic effect between a Pd promoter and a positive electric field on the oxygen adsorption energy, i.e. the Pd promoter and electric field combination weaken the oxygen adsorption energy to a greater degree than the simple addition of both components separately. Overall, the work shows that the application of an applied external electric field may be a useful tool in fine-tuning chemical properties of Fe-based catalysts in hydrodeoxygenation applications.

Bray, Jacob E.↗

Characterization of CoCu- and CoMn-based catalysts for the Fischer Tropsch reaction toward chain-lengthened oxygenates

The need for a sustainable energy supply in the face of depleting oil reserves has reignited the importance of Fischer Tropsch (FT) Synthesis technology. Presently, the FT process is practiced at the industrial scale to predominately produce synthetic diesel-type fuels and lubricants. More recently, the possibility of hydrogenating CO towards oxygenates, and not just hydrocarbons, has been explored. We have developed a series of CoCuMn and CoMnK catalysts prepared via the oxalate co-precipitation route that are capable of forming oxygenates with desirable selectivity. Upon H2-assisted thermal decomposition of the resultant mixed metal Co1Cu1Mn1 oxalates, catalysts naturally exhibited a cobalt core-copper shell configuration with Mn5O8 throughout the catalyst nanoparticle as determined via Atom Probe Tomography (APT). We suggest structural changes are induced by the CO and H2 reactants to form the catalytically active phase under real-time reaction conditions as demonstrated by corroborative density functional theory calculations and experimental evidence. APT studies also showed that a Co4Mn1K0.1 catalyst post reaction contained a cobalt carbide phase as determined from a Co/C ratio of 2/1. Manganese and potassium were found only in the outermost part of the particle. Both catalysts were found to contain the presence of a Mn5O8 oxidic phase before and post reaction which we attribute to the high activity toward oxygenates of these two catalysts.

Voss, Jenny↗

Predicting the Electric Field Effect on the Lateral Interactions Between Adsorbates: O/Fe(100) from First Principles

A density functional theory parameterized lattice gas cluster expansion of oxygen on an Fe(100) surface is developed in the presence and absence of an applied positive and negative external electric field, characterizing the heterogeneity in oxygen's surface distribution and the effect of an external electric field on the lateral interactions between the adsorbates. We show that the presence of a negative electric field tends to weaken both attractive and repulsive interactions while the positive electric field tends to strengthen these interactions, altering surface distributions and ground state configurations. Since lateral interactions have been shown to play a critical role in defining catalytic behavior, the application of an applied electric field has the potential to be a useful tool in adjusting critical chemical properties of Fe-based hydrodeoxygenation catalysts, by decreasing the repulsive interactions between the adspecies in the presence of a negative field and thereby mitigating the formation of an oxide.

Bray, Jacob E.↗