Engineering topics

Collins, Earl R., Jr.

Publications and source records attributed to Collins, Earl R., Jr..

31 records · Page 2

NASA NTRS1987

High-Density-Tape Casting System

Centrifuge packs solids from slurry into uniform, dense layer. New system produces tapes of nearly theoretical packing density. Centrifugal system used to cast thin tapes for capacitors, fuel cells, and filters. Cylindrical rotary casting chamber mounted on high-speed bearings and connected to motor. Liquid for vapor-pressure control and casting slurry introduced from syringes through rotary seal. During drying step, liquid and vapor vented through feed tubes or other openings. Laminated tapes produced by adding more syringes to cast additional layers of different materials.

Collins, Earl R., Jr.↗

NASA NTRS1987

Vacuum Hold-Down System for Heat-Treating Thin Films

In improved furnace concept for heat-treating thin films, vacuum ports in vacuum plate(s) hold films connected together in zones so vacuum applied separately to each zone. Allows material being held to shrink or expand while still being held in place. Unclamped zones expand or contract , relieving local stresses so entire sheet accommades thermally induced changes without cracking. Applications include manufacture of thin semiconductor films for solar cells and of membranes for electrolytic production of oxygen.

Collins, Earl R., Jr.↗

NASA NTRS1987

Easy-to-Install Link for Track Treads

Link with integral tapered pins proposed as means of joining treads on tracked vehicles. Proposed link saves assembly and maintenance time. Dual pins on link fit into pair of holes on adjacent tread shells. Pins secured by locking clip pressed into grooves on pins.

Collins, Earl R., Jr.↗

NASA NTRS1987

More Durable Tracks for Heavy Vehicles

Tie bars instead of threaded fasteners make track throwing less likely. Proposed undercarriage for tank or bulldozer has flanged edges to prevent rocks and other road debris from getting caught in track drive and damaging or casting off track. Improved track has no threaded fasteners to be loosened by road shock and vibration. Continuous chain of floating guide bars articulated at web junctions. Pins replace bolted connections. Guide bars and flanges on vehicle keep out stones.

Collins, Earl R., Jr.↗

NASA NTRS1986

Tank tread assemblies with track-linking mechanism

The proposed tank tread assembly has adjacent tank tread segments joined by a link bearing tapered pins retained by clips inserted through the tread shells perpendicular to the axes of the pin. It also has highway pads attached by a release rod bearing tapered, grooved cams which interlockingly engage tabs inserted into the tread shells.

Collins, Earl R., Jr.↗

NASA NTRS1986

Continuous Removal of Coal-Gasification Residue

Continuous-flow hopper processes solid residue from coal gasification, converting it from ashes, cinders, and clinkers to particles size of sand granules. Unit does not require repeated depressurization of lockhopper to admit and release materials. Therefore consumes less energy. Because unit has no airlock valves opened and closed repeatedly on hot, abrasive particles, subjected to lesser wear. Coal-gasification residue flows slowly through pressure-letdown device. Material enters and leaves continuously. Cleanout door on each pressure-letdown chamber allows access for maintenance and emergencies.

Collins, Earl R., Jr.↗

NASA NTRS1986

Bidirectional, Automatic Coal-Mining Machine

Proposed coal-mining machine operates in both forward and reverse directions along mine face. New design increases efficiency and productivity, because does not stop cutting as it retreats to starting position after completing pass along face. To further increase efficiency, automatic miner carries its own machinery for crushing coal and feeding it to slurry-transport tube. Dual-drum mining machine cuts coal in two layers, crushes, mixes with water, and feeds it as slurry to haulage tube. At end of pass, foward drum raised so it becomes rear drum, and rear drum lowered, becoming forward drum for return pass.

Collins, Earl R., Jr.↗

NASA NTRS1986

Secure Disposal Container for Classified Papers

Meshing steel combs retain papers when container overturned. Comblike shutters installed on hinges near deflectors. If container is upright, combs hang vertically and out of way. When container is tipped or overturned, gravity forces one or both of combs to fall over opening. When this happens, teeth intermesh and container opening covered, preventing its contents from falling out.

Collins, Earl R., Jr.↗

NASA NTRS1986

Variable Control Port for Fluidic Control Device

Volume and velocity of control flow independently adjustable. In proposed device rotatable D-shaped control sector throttles down control port or open it completely and set to any intermediate control-port crosssectional area. Although adjustment affects volume and control-port head loss, volume and velocity controlled independently by also adjusting fluidsupply pressure. Allows adjustment to wider range of control conditions and ability to maximize control efficiency. Fluidic control theory suggests possibility of improvement in control ratio of at least 2:1 over conventional devices.

Collins, Earl R., Jr.↗

NASA NTRS1986

Improved Jet-Mill Silicon Grinder

Proposed refinement in jet-mill grinding of silicon reduces proportion of unusable, overly ground particles. Particles serve as seeds for growth of silicon from vapor. In new grinding apparatus, particle separator distinct from collision chamber. Particle collides only once before sorted for size. If proper size, extracted; if not, returned to chamber for another collision.

Collins, Earl R., Jr.↗

NASA NTRS1986

More Secure Fastening for Tracked-Vehicle Pads

Method of fastening road pads on tracked vehicles ensures retaining tabs properly installed and less likely to fail from shock or pad squirming when tracked vehicle turns. No risk squirming of pad might overcome retaining force of rubber encapsulation or teeth of split-collet fastener shred soft-iron projections on pad shell, causing inadvertent release of pad. Rod extending through track shells and tabs on pad shells includes grooved cams to secure pads.

Collins, Earl R., Jr.↗

NASA NTRS1986

Pulsed, Hydraulic Coal-Mining Machine

In proposed coal-cutting machine, piston forces water through nozzle, expelling pulsed jet that cuts into coal face. Spring-loaded piston reciprocates at end of travel to refill water chamber. Machine a onecylinder, two-cycle, internal-combustion engine, fueled by gasoline, diesel fuel, or hydrogen. Fuel converted more directly into mechanical energy of water jet.

Collins, Earl R., Jr.↗

NASA NTRS1985

Improved Highway Pads for Tracked Vehicles

New pads attach faster and hold more securely than conventional pads. Rubber pad held on tread by bent locking tab and by lip that engages recess in tread. Tab hammered in during installation and pried out during removal. New designs ease installation of rubber pads on treads of tracked vehicles to prevent damage to highways. Designs apply to bulldozers, cranes, and excavating machines.

Collins, Earl R., Jr.↗