Engineering topics

Colvin, Tim R.

Publications and source records attributed to Colvin, Tim R..

6 records

NASA NTRS1994

The unified lunar control network: 1994 version

The objective of the unified lunar control network is to combine a series of control networks into one compatible network with its origin at the center of mass of the Moon and its coordinates referred to the mean Earth/polar axis system. The initial unified system contained 130 nearside points from Apollo data and 1026 from telescopic data. It also contained ten Mariner 10 points. The total number of points was 1166. The current network includes modifications to the past network and extends the coverage. Coordinates of points north of the Apollo region have been recomputed based on Galileo images from the second Earth-Moon flyby. Coordinates of points in the Apollo region were held fixed; however, coordinates of points north of the Apollo region in the telescopic region and many Mariner 10 points were recomputed. All of the Mariner 10 points were remeasured and integrated into the network. Additional points in the Apollo region including the farside have been added. The unified network now contains 1478 points. Apollo, Mariner 10, and Galileo pictures all contained some farside points. The coordinates of the 1478 points are available only in the microfiche supplement to this paper.

Davies, Merton E.↗

NASA NTRS1991

A control network of Triton

A control network for Triton has been computed using a bundle-type analytical triangulation program. The network contains 105 points that were measured on 57 Voyager-2 pictures. The adjustment contained 1010 observation equations and 382 normal equations and resulted in a standard measurement error of 13.36 microns. The coordinates of the control points, the camera orientation angles at the times when the pictures were taken, and Triton's mean radius were determined. A separate statistical analysis confirmed Triton's radius to be 1352.6 + or - 2.4 km. Attempts to tie the control network around the satellite were unsuccessful because discontinuities exist in high-resolution coverage between 66 deg and 289 deg longitude, north of 38 deg latitude, and south of 78 deg latitude.

Davies, Merton E.↗

NASA NTRS1989

Phoebe: A preliminary control network and rotational elements

A preliminary control network for the Saturnian satellite Phoebe was determined based upon 6 distinct albedo features mapped on 16 Voyager 2 images. Using an existing map and an analytical triangulation program which minimized the measurement error, the north pole of Phoebe was calculated to be alpha sub 0 = 355.0 deg + or - 9.6 deg, delta sub 0 = 68.7 deg + or - 7.9 deg, where alpha sub 0, delta sub 0 are standard equatorial coordinates with equinox J2000 at epoch J2000. The prime meridian of Phoebe was computed to be W = 304.7 deg + 930.833872d, where d is the interval in days from JD 2451545.0 TDB.

Colvin, Tim R.↗

NASA NTRS1987

A unified lunar control network - The near side

A unified lunar control network for the moon's near side, which combines all the data collected by the Lunokhod 2 and Apollo 11, 14, 15, 16, and 17 missions, is presented. Transformations involving translation, rotation, and scale were determined that adjusted the coordinates of the points of three Apollo control networks, computed previously, to the center of mass origin and the mean earth/polar axis coordinate system defined by the lunar ranging retroreflector experiment. The transformed control network computed by the Defense Mapping Agency Aerospace Center was found to be the best fit to the Apollo ALSEP antenna coordinates and was selected as a base to transform all points in Meyer's (1979) telescopic network to the new origin and coordinate system. New coordinates of 1156 of these points are given as are 10 points from a Mariner 10 solution in the north polar region.

Davies, Merton E.↗

NASA NTRS1987

The control networks of the satellites of Uranus

The present photogrammetric derivation of control networks for the five Uranus satellites Miranda, Ariel, Umbriel, Titania, and Oberon, on the basis of Voyager 2 images, covers the illuminated southern hemisphere of each satellite and respectively yields 103, 52, 43, 46, and 34 coordinate points. It is found that Titania is ellipsoidal, with 241-, 235-, and 232-km radii.In addition, mean radii are determined to be 579 km for Ariel, 586 km for Umbriel, 790 km for Titania, and 762 km for Oberon. Some of the control points used have been identified on the U.S. Geological Survey maps of these satellites.

Davies, Merton E.↗

NASA NTRS1987

A unified lunar control network

Mapping network control on the Moon is composed of a number of independent regional networks. These networks frequently have different origins but never have common ties, even in overlapping areas. The objective of the unified network program is to tie the regional networks into a single consistent planetwide control network. The plan is to start with the best defined regions, create common ties with neighboring data sets, and then expand into poorly defined regions. The most accurately defined points on the Moon are locations of the laser ranging retroreflectors and the VLBI measurements of the locations of the Apollo 15, 16, 17 ALSEP stations. Recent values for the coordinates of the retroreflectors have been received. The accuracy of these locations is about 30 m and their locations are used to define the center-of-mass and, hence, the origin of the unified lunar coordinate system. The coordinates of the retroreflectors are given in both principal axis and mean Earth/Polar axis systems. Mean Earth/Polar axis coordinates have been recommended by the IAU for the Moon. The difference in the coordinates is important, more than 600 m in latitude and longitude.

Davies, Merton E.↗