Engineering topics

Colwell, Gene T.

Publications and source records attributed to Colwell, Gene T..

9 records

NASA NTRS1992

Heat pipe and surface mass transfer cooling of hypersonic vehicle structures

The problem of determining the feasibility of cooling hypersonic vehicle leading-edge structures exposed to severe aerodynamic surface heating using heat pipe and mass transfer cooling techniques is addressed. A description is presented of a numerical finite-difference-based hypersonic leading-edge cooling model incorporating poststartup liquid metal heat pipe cooling with surface transpiration and film cooling to predict the transient structural temperature distributions and maximum surface temperatures of hypersonic vehicle leading edge. An application of this model to the transient cooling of a typical aerospace plane wing leading-edge section. The results of this application indicated that liquid metal heat pipe cooling alone is insufficient to maintain surface temperatures below an assumed maximum level of 1800 K for about one-third of a typical aerospace plane ascent trajectory through the earth's atmosphere.

Colwell, Gene T.↗

NASA NTRS1989

Modeling of transient heat pipe operation

Mathematical models and an associated computer program for heat pipe startup from the frozen state have been developed. Finite element formulations of the governing equations are written for each heat pipe region for each operating condition during startup from the frozen state. The various models were checked against analytical and experimental data available in the literature for three specific types of operation. Computations using the methods developed were made for a space shuttle reentry mission where a heat pipe cooled leading edge was used on the wing.

Colwell, Gene T.↗

NASA NTRS1988

Development of an emulation-simulation thermal control model for space station application

The goal of this program is to develop an improved capability for comparing various techniques for thermal management in the space station. The work involves three major tasks: Develop a Technology Options Data Base (Task 1); Complete Development of a Space Station Thermal Control Technology Assessment Program (Task 2); and Develop and Evaluate Emulation Models (Task 3).

Hartley, James G.↗

NASA NTRS1987

Development of an emulation-simulation thermal control model for space station application

Many features were added to the Thermal Control System (TCS) program to increase its user-friendliness. Several apparent inconsistencies were identified. In some instances, these have led to modifications to the source programs. With the summary line-sizing information, the user can more readily compare the TCS program results with other available data. Two mathematical models were completed: one deals with sizing and analysis of bus heat exchangers and the other provides a means of analyzing a variety of heat pipe radiator designs. A generic heat pipe model was added to the TCS Analysis Program.

Colwell, Gene T.↗

NASA NTRS1987

Modeling of transient heat pipe operation

The use of heat pipes is being considered as a means of reducing the peak temperature and large thermal gradients at the leading edges of reentry vehicles and hypersonic aircraft and in nuclear reactors. In the basic cooling concept, the heat pipe covers the leading edge, a portion of the lower wing surface, and a portion of the upper wing surface. Aerodynamic heat is mainly absorbed at the leading edge and transported through the heat pipe to the upper and lower wing surface, where it is rejected by thermal radiation and convection. Basic governing equations are written to determine the startup, transient, and steady state performance of a haet pipe which has initially frozen alkali-metal as the working fluid.

Colwell, Gene T.↗

NASA NTRS1987

Development of an emulation-simulation thermal control model for space station application

An improved capability for comparing various techniques for thermal management in the Space Station was developed. Current planning for the orbiting space station calls for a dual keel configuration. The thermal control system (TCS) for the space is composed of a central TCS and internal thermal control systems for the modules, as well as service facilities and attached payloads. The internal TCS may be attacted to the central TCS through a thermal bus. The central TCS is composed of a main transport system which collects waste thermal energy from each of the modules and transports it through coolant lines to the main rejection system. The waste heat loads in the modules arise from electrical and electronic equipment as well as metabolic loads in the manned modules. Several candidate technologies are being considered for acquiring the waste heat loads, for transporting the thermal energy between the acquisition and rejection systems, and for rejecting the waste heat to space. The analysis techniques described were developed for use in evaluating reliability, weights, costs, volumes, and power requirements for configurations using different candidates and different mission parameters.

Hartley, James G.↗

NASA NTRS1986

Modeling of transient heat pipe operations

An analysis of the steady, compressible, one-dimensional, laminar flow of sodium vapor is presented for a case of a flat plate-type heat pipe with asymmetrical boundary conditions. In addition, shear stress at the liquid-vapor interface, variations of vapor quality, and momentum and energy factors are considered. A similarity solution for a semiporous channel is used to provide the velocity profile at cross sections.

Colwell, Gene T.↗

NASA NTRS1986

Development of an emulation-simulation thermal control model for space station application

The orbiting space station being developed by NASA will have many thermal sources and sinks as well as requirements for the transport of thermal energy through large distances. The station is also expected to evolve over twenty or more years from an initial design. As the station evolves, thermal management will become more difficult. Thus, analysis techniques to evaluate the effects of changing various thermal loads and the methods utilized to control temperature distributions in the station are essential. Analysis techniques, including a user-friendly computer program, were developed which should prove useful to thermal designers and system analysts working on the space station. The program uses a data base and user input to compute costs, sizes, and power requirements for individual components and complete systems. User input consists of selecting mission parameters, selecting thermal acquisition configurations, transport systems and distances, and thermal rejection configurations. The capabilities of the program may be expanded by including additional thermal models as subroutines.

Hartley, James G.↗

NASA NTRS1986

Evaluation of Space Station thermal control techniques

A procedure is developed for evaluating various candidates for thermal control in the orbiting Space Station. Candidates for acquisition, transport and rejection are considered. For example, thermal rejection candidates include heat pipe radiators, high capacity heat pipe radiators and liquid droplet radiators. A computer program has been developed which computes subsystem and total system weights, volumes, powers and costs for a system consisting of selected acquisition, transport and rejection candidates. The program user is also able to select mission parameters such as duration, resupply interval, thermal loads, transport distance, acquisition temperature and rejection temperature. Simulation models are included in the program which allow the user to change candidate designs. For example, for a high capacity heat pipe radiator the user may change working fluid, materials, radiator temperature, radiator geometry, surface emissivity and surface absorptivity. The program also allows the selection of several different acquisitions of thermal energy at different temperatures using different acquisition candidates.

Hall, J. B.↗