Search NASA⌕ Search

Engineering topics

Comes, Ryan B.

Publications and source records attributed to Comes, Ryan B..

At least 19 records

Strain-dependent insulating state and Kondo effect in epitaxial SrIrO 3 films

The large spin-orbit coupling in iridium oxides plays a significant role in driving novel physical behaviors, including emergent phenomena in the films and heterostructures of perovskite and Ruddlesden-Popper iridates. Here, in this Letter, we study the role of epitaxial strain on the electronic behavior of thin SrIrO 3 films. We find that compressive epitaxial strain leads to metallic transport behavior, but a slight tensile strain shows gapped behavior. Temperature-dependent resistivity measurements are used to examine different behaviors in films as a function of strain. We find Kondo contributions to the resistivity, with stronger effects in films that are thinner and under less compressive epitaxial strain. These results show the potential to tune SrIrO 3 into Kondo insulating states and open possibilities for a quantum critical point that can be controlled with strain in epitaxial films.

36 MATERIALS SCIENCE↗

Jahn–Teller-driven phase segregation in Mn x Co 3–x O 4 spinel thin films

Transition metal spinel oxides comprised of earth-abundant Mn and Co have long been explored for their use in catalytic reactions and energy storage. However, understanding functional properties can be challenging due to differences in sample preparation and the ultimate structural properties of the materials. Epitaxial thin film synthesis provides a novel means of producing precisely controlled materials to explore the variations reported in the literature. In this work, Mn x Co 3–x O 4 samples from x = 0 to x = 1.28 were synthesized through molecular beam epitaxy and characterized to develop a material properties map as a function of stoichiometry. Here, films were characterized via in situ x-ray photoelectron spectroscopy, x-ray diffraction, scanning transmission electron microscopy, and polarized K-edge x-ray absorption spectroscopy. Mn cations within this range were found to be octahedrally coordinated, in line with an inverse spinel structure. Samples largely show mixed Mn 3+ and Mn 4+ character with evidence of phase segregation tendencies with the increasing Mn content and increasing Mn 3+ formal charge. Phase segregation may occur due to structural incompatibility between cubic and tetragonal crystal structures associated with Mn 4+ and Jahn–Teller active Mn 3+ octahedra, respectively. Our results help in explaining the reported differences across samples in these promising materials for renewable energy technologies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Engineering metal oxidation using epitaxial strain

The oxides of platinum group metals are promising for future electronics and spintronics due to the delicate interplay of spin-orbit coupling and electron correlation energies. However, their synthesis as thin films remains challenging due to their low vapour pressures and low oxidation potentials. Here we show how epitaxial strain can be used as a control knob to enhance metal oxidation. Using Ir as an example, we demonstrate the use of epitaxial strain in engineering its oxidation chemistry, enabling phase-pure Ir or IrO 2 films despite using identical growth conditions. The observations are explained using a density-functional-theory-based modified formation enthalpy framework, which highlights the important role of metal-substrate epitaxial strain in governing the oxide formation enthalpy. We also validate the generality of this principle by demonstrating epitaxial strain effect on Ru oxidation. The IrO 2 films studied in our work further revealed quantum oscillations, attesting to the excellent film quality. The epitaxial strain approach we present could enable growth of oxide films of hard-to-oxidize elements using strain engineering.

36 MATERIALS SCIENCE↗

Surface stability of SrNbO 3+δ grown by hybrid molecular beam epitaxy

4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO 3 is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d 1 Nb 4+ cation and the limitations in the delivery of refractory Nb. To date, films have been grown primarily by pulsed laser deposition (PLD), but development of a means to grow and stabilize the material via molecular beam epitaxy (MBE) would enable studies of interfacial phenomena and multilayer structures that may be challenging by PLD. To that end, SrNbO 3 thin films were grown using hybrid MBE for the first time using a tris(diethylamido)(tert-butylimido) niobium precursor for Nb and an elemental Sr source on GdScO 3 substrates. Varying thicknesses of insulating SrHfO 3 capping layers were deposited using a hafnium tert-butoxide precursor for Hf on top of SrNbO 3 films to preserve the metastable surface. Grown films were transferred in vacuo for x-ray photoelectron spectroscopy to quantify elemental composition, density of states at the Fermi energy, and Nb oxidation state. Ex situ studies by x-ray absorption near edge spectroscopy and scanning transmission electron microscopy illustrate that the SrHfO 3 capping plays an important role in preserving the crystalline quality of the material and the Nb 4d 1 metastable charge state under atmospheric conditions.

36 MATERIALS SCIENCE↗

Incorporation of Ti in epitaxial Fe2TiO4 thin films

The titanomagnetites (Fe2-xTixO4, x = 1) are a family of reducible spinel-structure oxides of interest for their favorable magnetic, catalytic, and electrical transport properties. To understand the stability of the system during low temperature deposition, epitaxial thin films of Fe2TiO4 were deposited by molecular beam epitaxy on MgO(001) at 250 – 375°C. The homogeneous incorporation of Ti, Fe valence, and film morphology were all found to be strongly dependent on the oxidation conditions at the low substrate temperatures employed. More oxidizing conditions led to phase separation into epitaxial, faceted Fe3O4 and rutile TiO2. Less oxidizing conditions resulted in polycrystalline films that exhibited Ti segregation to the film surface, as well as mixed Fe valence (Fe3+, Fe2+, Fe0). A narrow window of intermediate oxygen partial pressure during deposition yielded nearly homogeneous Ti incorporation and a large fraction of Fe2+. However, these films were poorly crystallized, and no occupation of tetrahedral sites in the spinel lattice by Fe2+ was detected by x-ray magnetic circular dichroism at the Fe L-edge. After vacuum annealing, a small fraction of Fe2+ was found to occupy tetrahedral sites. Comparison of these results with previous work suggests that the restriction of the deposition conditions to low temperature by the MgO substrate limits the incorporation of Ti into the spinel lattice. This work suggests a path towards obtaining stoichiometric, well-crystallized Fe2TiO4 by MBE by utilizing high substrate temperature and low oxygen partial pressure during deposition on temperature-stable substrates.

Kaspar, Tiffany C.↗

Electronic and structural properties of single-crystal Jahn–Teller active Co 1+x Mn 2–x O 4 thin films

Recent investigations on spinel CoMn 2 O 4 have shown its potential for applications in water splitting and fuel cell technologies as it exhibits strong catalytic behavior through oxygen reduction reactivity. To further understand this material, we report for the first time the synthesis of single-crystalline Co 1+x Mn 2-x O 4 thin films using molecular beam epitaxy. By varying sample composition, we establish links between cation stoichiometry and material properties using in-situ x-ray photoelectron spectroscopy, x-ray diffraction, scanning transmission electron microscopy, x-ray absorption spectroscopy, and spectroscopic ellipsometry. Our results indicate that excess Co ions occupy interstitial tetrahedral sites up to a certain stoichiometry, then are substitutional for octahedrally-coordinated Mn beyond this threshold. Here, we compare these results with density functional theory models of stoichiometric CoMn 2 O 4 to understand how the Jahn-Teller distortion and hybridization in Mn-O bonds impact the ability to hole dope the material with excess Co. The findings provide important insights into CoMn 2 O 4 and related spinel oxides for future application as inexpensive oxygen reduction reaction catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine learning analysis of perovskite oxides grown by molecular beam epitaxy

Reflection high-energy electron diffraction (RHEED) is a ubiquitous in situ molecular beam epitaxial (MBE) characterization tool. Although RHEED can be a powerful means for crystal surface structure determination, it is often used as a static qualitative surface characterization method at discrete intervals during a growth. A full analysis of RHEED data collected during the entirety of MBE growths is made possible using principle component analysis (PCA) and $\textit{k}$-means clustering to examine significant boundaries that occur in the temporal clusters grouped from RHEED data and identify statistically significant patterns. This process is applied to data from homoepitaxial SrTiO 3 growths, heteroepitaxial SrTiO 3 grown on scandate substrates, BaSnO 3 films grown on SrTiO 3 substrates, and LaNiO 3 films grown on SrTiO 3 substrates. We report this analysis may provide additional insights into the surface evolution and transitions in growth modes at precise times and depths during growth, and that video archival of an entire RHEED image sequence may be able to provide more insight and control overgrowth processes and film quality.

36 MATERIALS SCIENCE↗

Electronic Structure and Band Alignment of LaMnO 3 /SrTiO 3 Polar/Nonpolar Heterojunctions

The behavior of polar LaMnO3 (LMO) thin films deposited epitaxially on non-polar SrTiO3(001) (STO) is dictated by both the LMO/STO band alignment and the chemistry of the Mn cation. Using in situ x-ray photoelectron spectros-copy (XPS), we directly measure the valence band offset (VBO) of LMO/STO heterojunctions as a function of thickness, and find that the VBO is 2.5 eV for thicker (= 3 u.c.) films. We find no evidence of a built-in potential in LMO films of any thickness. Measurements of the Mn valence by Mn L-edge x-ray absorption spectroscopy (XAS) and by spatially-resolved electron energy loss spectra in scanning transmission electron microscopy images (STEM-EELS) reveal that Mn2+ is present at the LMO surface, but not at the LMO/STO interface. These results are corroborated by DFT simula-tions that confirm a VBO of approximately 2.5 eV for both ideal and intermixed interfaces. We propose a model for the behavior of polar / non-polar LMO/STO heterojunctions in which the built-in potential is alleviated by the formation of oxygen vacancies at the LMO surface.

Kaspar, Tiffany C.↗

Tuning piezoelectric properties through epitaxy of La 2 Ti 2 O 7 and related thin films

Current piezoelectric sensors and actuators are limited to operating temperatures less than ~200ºC due to the low Curie temperature of the piezoelectric material. The strengthening the piezoelectric coupling of high-temperature piezoelectric materials, such as La 2 Ti 2 O 7 (LTO), would allow sensors to operate across a broad temperature range. The crystalline orientation and piezoelectric coupling direction of LTO thin films can be controlled by epitaxial matching to SrTiO 3 (001), SrTiO 3 (110), and rutile TiO 2 (110) substrates via pulsed laser deposition. The structure and phase purity of the films are investigated by x-ray diffraction and scanning transmission electron microscopy. Piezoresponse force microscopy is used to measure the in-plane and out-of-plane piezoelectric coupling in the films. The strength of the out-of-plane piezoelectric coupling can be increased when the piezoelectric direction is rotated partially out-of-plane via epitaxy. The strongest out-of-plane coupling is observed for LTO/STO(001). Deposition on TiO 2 (110) results in epitaxial La 2/3 TiO 3 , an orthorhombic perovskite of interest as a microwave dielectric material and an ion conductor. La 2/3 TiO 3 can be difficult to stabilize in bulk form, and epitaxial stabilization on TiO 2 (110) is a promising route to realize La 2/3 TiO 3 for both fundamental studies and device applications. Overall, these results confirm that control of the crystalline orientation of epitaxial LTO-based materials can govern the resulting functional properties.

36 MATERIALS SCIENCE↗

Dynamic interface rearrangement in LaFeO 3 / n - SrTiO 3 heterojunctions

Thin-film synthesis methods that have developed over the past decades have unlocked emergent interface properties ranging from conductivity to ferroelectricity. However, our attempts to exercise precise control over interfaces are constrained by a limited understanding of growth pathways and kinetics. In this paper, we demonstrate that shuttered molecular beam epitaxy induces rearrangements of atomic planes at a polar/nonpolar junction of LaFeO 3 (LFO)/n-SrTiO 3 (STO) depending on the substrate termination. Surface characterization confirms that substrates with two different (TiO 2 and SrO) terminations were prepared prior to LFO deposition; however, local electron-energy-loss spectroscopy measurements of the final heterojunctions show a predominantly LaO/TiO 2 interfacial junction in both cases. Ab initio simulations suggest that the interfaces can be stabilized by trapping extra oxygen (in LaO/TiO 2 ) and forming oxygen vacancies (in FeO 2 /SrO), which points to different growth kinetics in each case and may explain the apparent disappearance of the FeO 2 /SrO interface. Finally, we conclude that judicious control of deposition time scales can be used to modify growth pathways, opening new avenues to control the structure and properties of interfacial systems.

36 MATERIALS SCIENCE↗

Heterogeneous Two-Phase Pillars in Epitaxial NiFe 2 O 4 -LaFeO 3 Nanocomposites

Self-assembled epitaxial oxide nanocomposites have been explored for a wide range of applications, including multiferroic and magnetoelectric properties, plasmonics, and catalysis. These so-called “vertically aligned nanocomposites” form spontaneously during the deposition process when segregation into two phases is energetically favorable as compared to a solid solution. However, there has been surprisingly little work understanding the driving forces that govern the synthesis of these materials, which can include point defect energetics, surface diffusion, and interfacial energies. To explore these factors, La-Ni-Fe-O films have been synthesized by molecular beam epitaxy and it is shown that these phase segregate into spinel-perovskite nanocomposites. Using complementary scanning transmission electron microscopy and atom-probe tomography, the elemental composition of each phase is examined and found that Ni ions are exclusively found in the spinel phase. From correlative analysis, a model for the relative favorability of the Ni2+ and Ni3+ valences under the growth conditions is developed. It is shown that multidimensional characterization techniques provide previously unobserved insight into the growth process and complex driving forces for phase segregation.

36 MATERIALS SCIENCE↗

The effects of core-level broadening in determining band alignment at the epitaxial SrTiO 3 (001)/ p -Ge(001) heterojunction

Chemical effects at the surface and interface can broaden core-level spectra in X-ray photoemission for thin-film heterojunctions, as can electronic charge redistributions. We explore these effects and their influence on the measurement of valence and conduction band offsets at the epitaxial SrTiO 3 (001)/p-Ge(001) heterojunction. Here, we observe a clear broadening in Ge 3d and Sr 3d core-level X-ray photoelectron spectra relative to those of clean, bulk Ge(001), and homoepitaxial SrTiO 3 (001), respectively. Angle-resolved measurements indicate that this broadening is driven primarily by chemical shifts associated with surface hydroxylation, with built-in potentials playing only a minor role. The impact of these two interpretations on the valence band offset is significant on the scale of transport energetics, amounting to a difference of 0.2 eV.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing the Origin of Interfacial Carriers in SrTiO 3 –LaCrO 3 Superlattices

Emergent phenomena at complex oxide interfaces could provide the basis for a wide variety of next-generation devices, including photovoltaics and spintronics. To date, detailed characterization and computational modeling of interfacial defects, cation intermixing, and film stoichiometry have helped to explain many of the novel behaviors observed at a single heterojunction. Unfortunately, many of the techniques employed to characterize a single heterojunction are less effective for a superlattice made up of a repeating series of interfaces that induce collective interfacial phenomena throughout a film. However, these repeating interfaces present an untapped opportunity to introduce an additional degree of complexity, such as confined electric fields, that cannot be studied in a single heterojunction. In this work, we explore the properties of SrTiO3-LaCrO3 superlattices to understand the role of defects, including variations in cation stoichiometry of individual layers of the superlattice, intermixing across interfaces, and interfacial oxygen vacancies. Using x-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy electron energy-loss spectroscopy (STEM-EELS), we quantify the stoichiometry of individual layers of the superlattice and determine the degree of intermixing in these materials. By comparing these results to both density functional theory (DFT) models and STEM-EELS measurements of the Ti and Cr valence in each layer of the superlattice, we correlate different types of defects with the associated materials properties of the superlattice. We show that a combination of ab initio modeling and complementary structural characterization methods can offer unique insight into structure-property relationships in many oxide superlattice systems.

36 MATERIALS SCIENCE↗

Predictive Control over Charge Density in the Two-Dimensional Electron Gas at the Polar-Nonpolar NdTiO 3 / SrTiO 3 Interface

Through systematic control of the Nd concentration, we show that the carrier density of the twodimensional electron gas (2DEG) in SrTiO3=NdTiO3=SrTiO3 ð001Þ can be modulated over a wide range. We also demonstrate that the NdTiO3 in heterojunctions without a SrTiO3 cap is degraded by oxygen absorption from air, resulting in the immobilization of donor electrons that could otherwise contribute to the 2DEG. This system is, thus, an ideal model to understand and control the insulator-to-metal transition in a 2DEG based on both environmental conditions and film-growth processing parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interface-Induced Polarization in SrTiO 3 -LaCrO 3 Superlattices

Epitaxial interfaces and superlattices comprised of polar and non-polar perovskite oxides have generated a good deal of interest because of the variety of novel properties they possess. In this work, we examine superlattices comprised of SrTiO3 (STO) and LaCrO3 (LCO) layers; we demonstrate that the differing band alignment of the polar LCO layer and the non-polar STO layer produces a ferroelectric phase transition throughout the STO layers of the superlattice. Through x-ray absorption near edge spectroscopy and aberration-corrected scanning transmission electron microscopy we show that the Ti cations are displaced off-center in the TiO6 octahedra along the superlattice growth direction. We also demonstrate that a built-in potential gradient exists within the STO and LCO layers via in situ x-ray photoelectron spectroscopy measurements. Density functional theory models of the system are in excellent agreement with these results, predicting both the ferroelectric octahedral distortion and the built-in electric field. These results represent a new avenue for research in perovskite superlattices, as two non-ferroelectric phases are shown to induce a bulk ferroelectric response due to interfacial phenomena.

Complex oxides↗

Infrared optical absorption in low-spin Fe 2+ -doped SrTiO 3

Band gap engineering in SrTiO3 and related titanate perovskites has long been explored due to the intriguing properties of the materials for photocatalysis and photovoltaic applications. A popular approach in the materials chemistry community is to substitutionally dope aliovalent transition metal ions onto the B site in the lattice to alter the valence band. However, in such a scheme there is limited control over the dopant valence, and compensating defects often form. Here we demonstrate a novel technique to controllably synthesize Fe2+- and Fe3+-doped SrTiO3 thin films without formation of compensating defects by co-doping with La3+ ions on the A site. We stabilize Fe2+-doped films by doping with two La ions for every Fe dopant, and find that the Fe ions exhibit a low-spin electronic configuration, producing optical transitions in the near infrared regime and degenerate doping. The novel electronic states observed here offer a new avenue for band gap engineering in perovskites for photocatalytic and photovoltaic applications.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗