Search NASA⌕ Search

Engineering topics

Constable, Steven

Publications and source records attributed to Constable, Steven.

Monitoring Offshore CO 2 Sequestration Using Marine CSEM Methods; Constraints Inferred from Field- and Laboratory-Based Gas Hydrate Studies

Offshore geological sequestration of CO 2 offers a viable approach for reducing greenhouse gas emissions into the atmosphere. Strategies include injection of CO 2 into the deep-ocean or ocean-floor sediments, whereby depending on pressure–temperature conditions, CO 2 can be trapped physically, gravitationally, or converted to CO 2 hydrate. Energy-driven research continues to also advance CO 2 -for-CH 4 replacement strategies in the gas hydrate stability zone (GHSZ), producing methane for natural gas needs while sequestering CO 2 . In all cases, safe storage of CO 2 requires reliable monitoring of the targeted CO 2 injection sites and the integrity of the repository over time, including possible leakage. Electromagnetic technologies used for oil and gas exploration, sensitive to electrical conductivity, have long been considered an optimal monitoring method, as CO 2 , similar to hydrocarbons, typically exhibits lower conductivity than the surrounding medium. We apply 3D controlled-source electromagnetic (CSEM) forward modeling code to simulate an evolving CO 2 reservoir in deep-ocean sediments, demonstrating sufficient sensitivity and resolution of CSEM data to detect reservoir changes even before sophisticated inversion of data. Laboratory measurements place further constraints on evaluating certain systems within the GHSZ; notably, CO 2 hydrate is measurably weaker than methane hydrate, and >1 order of magnitude more conductive, properties that may affect site selection, stability, and modeling considerations.

58 GEOSCIENCES↗

Electrical Properties of Carbon Dioxide Hydrate: Implications for Monitoring CO 2 in the Gas Hydrate Stability Zone

CO 2 and CH 4 clathrate hydrates are of keen interest for energy and carbon cycle considerations. While both typically form on Earth as cubic structure I (sI), we find that pure CO 2 hydrate exhibits over an order of magnitude higher electrical conductivity ( σ ) than pure CH 4 hydrate at geologically relevant temperatures. In this study, the conductivity was obtained from frequency-dependent impedance ( Z ) measurements made on polycrystalline CO 2 hydrate (CO 2 ·6.0 ± 0.2H 2 O by methods here) with 25% gas-filled porosity, compared with CH 4 hydrate (CH 4 ·5.9H 2 O) formed and measured in the same apparatus and exhibiting closely matching grain characteristics. The conductivity of CO 2 hydrate is 6.5 × 10 –4 S/m at 273K with an activation energy ( E a ) of 46.5 kJ/mol at 260–281 K, compared with ~5 × 10 –5 S/m and 34.8 kJ/m for CH 4 hydrate. Equivalent circuit modeling indicates that different pathways govern conduction in CO 2 versus CH 4 hydrate. Results show promise for use of electromagnetic methods in monitoring CO 2 hydrate formation in certain natural settings or in CO 2 /CH 4 exchange efforts.

58 GEOSCIENCES↗

Laboratory Electrical Conductivity of Marine Gas Hydrate

Methane hydrate was synthesized from pure water ice and flash frozen seawater, with varying amounts of sand or silt added. Electrical conductivity was determined by impedance spectroscopy, using equivalent circuit modeling to separate the effects of electrodes and to gain insight into conduction mechanisms. Silt and sand increase the conductivity of pure hydrate; we infer by contaminant NaCl contributing to conduction in hydrate, to values in agreement with resistivities observed in well logs through hydrate–saturated sediment. The addition of silt and sand lowers the conductivity of hydrate synthesized from seawater by an amount consistent with Archie's law. Here, all samples were characterized using cryogenic scanning electron microscopy and energy dispersive spectroscopy, which show good connectivity of salt and brine phases. Electrical conductivity measurements of pure hydrate and hydrate mixed with silt during pressure–induced dissociation support previous conclusions that sediment increases dissociation rate.

58 GEOSCIENCES↗

In situ and laboratory evidence for high electrical anisotropy in marine gas hydrate

Marine gas hydrate is electrically resistive compared to the surrounding hydrate-free formation, a property that is exploited in borehole logging and also by marine controlled-source electromagnetic (CSEM) surveys. Well logging shows that hydrate can be electrically anisotropic, with vertical resistivities up to 10 times higher than horizontal resistivities, although the use of logging tools capable of measuring anisotropy is the exception rather than the rule. Marine CSEM methods are well known to be sensitive to anisotropy in seafloor sediments, and, for example, we have observed anisotropies of more than an order of magnitude using CSEM to map offshore relic permafrost.

02 PETROLEUM↗