Development of PRIMRE the Portal and Repository for Information on Marine Renewable Energy.
Abstract not provided.
Engineering topics
Publications and source records attributed to Copping, Andrea.
Abstract not provided.
The Marine Renewable Energy (MRE) industry is in the early stages of development corresponding to low technology readiness levels (TRLs) where the ability of the MRE community (developers, researchers, academics, stakeholders, investors, and regulators) to work together to share knowledge, experience, and lessons learned is critical to the advancement of the entire MRE industry. Through collaboration on solving common problems, the MRE community has the potential to reduce cost and accelerate technology development. Currently, the US Department of Energy (US DOE) Water Power Technologies Office (WPTO) is addressing the challenge of storing, curating, and accessing MRE information by sponsoring development of MRE databases and information portals such as Tethys (https://tethys.pnnl.gov), OpenEI (https://openei.org), the MHK Data Repository (MHKDR, https://mhkdr.openei.org/), and a searchable MRE code catalog and open source code repository (MHKiT, currently under development), to name a few. These sites host scientific papers, news articles, reports, databases, open source codes, and stakeholder engagement information, but they are only a step towards facilitating global discovery and use. In short, there is an abundance of information available online, however it is located on many disparate sites and repositories that make the discovery of those data and information difficult. A DOE national laboratory team from the National Renewable Energy Laboratory (NREL), Pacific Northwest National Laboratory (PNNL), and Sandia National Laboratories (Sandia) is addressing the issues of data discoverability, shared knowledge, and interconnection of existing MRE databases and information portals. To meet the needs of the MRE community, as identified through multiple community outreach and engagement events, and described in this paper, the multi-lab team has developed an implementation plan for PRIMRE, the Portal and Repository for Information on Marine Renewable Energy. PRIMRE will provide broad access to information on engineering and technologies, resource characterization, device performance, and environmental effects of MRE projects. PRIMRE will facilitate the commercial development of the MRE industry by increasing the accessibility and discoverability of this information, integrating the databases and information portals described in this paper, and developing standards and guidelines. Providing consistent, easy access to information can help reduce duplication of effort and enable the MRE community to learn from past failures and build upon the successes of others to innovate and advance the commercialization of MRE technologies.
The blue economy is an emerging sector that will require energy to allow many scientific and commercial endeavors to reach their potential. The U.S. Department of Energy’s Water Power Technologies Office seeks to understand marine and coastal opportunities for which marine energy could fulfill those energy needs. This report documents the material gathered during a year-long fact-finding effort engaging users and developers, through literature review, workshops, interviews, and national lab analyses, as well as a Request for Information process. Each market was assessed by a set of common analyses: opportunity summary; application description and power requirements; market description, power options, and geographic relevance; marine energy potential value proposition; and path forward including research and development needs and potential partners. The major finding is that there are more markets with potential than anticipated, both for Power at Sea (including ocean observation and navigation, underwater vehicle charging, marine aquaculture, marine algae, and seawater mining), and Resilient Coastal Communities (including desalination, coastal resiliency and disaster recovery, and community-scale isolated power systems). The enabling attributes of marine energy resources include that they are abundant, geographically diverse, energy dense, predictable, and complementary to other energy sources. This report can help direct analysis and research and development efforts by government, scientists, developers, and other stakeholders to more deeply understand and meet specific technical and economic requirements to power emerging opportunities in the blue economy.
Abstract not provided.
Abstract not provided.
Marine renewable energy (MRE) is in the early stages of contributing to the energy portfolios of the US and many other nations around the world. Although many MRE developers are designing devices that will harvest energy to contribute to the electrical grid from waves, tides, and ocean currents, a number of other promising maritime markets could be supplied with MRE power at sea. These maritime markets are often less price sensitive than utility-scale electricity markets and can handle some degree of intermittency. Some of the promising maritime markets that could benefit from co-located power generation include ocean observation nodes, underwater recharge of autonomous vehicles, desalination of seawater for remote coastal areas, offshore aquaculture, shoreline protection and electricity generation, providing electricity and freshwater following coastal emergencies, providing power to islanded and isolated communities, powering and cooling nearshore of underwater data centers, recharging of electric surface vessels, and personal charging of electronics. Pairing of MRE power generation with these and other maritime markets is in the early stages, but the potential for synergy and growth of MRE coupled to these markets is promising.
Abstract not provided.
Not Available
This study examines maritime routes between ports along the Atlantic coast of the US, utilising Automated Identification System (AIS) data for the years 2010 through 2012. The delineation of vessel routes conducted in this study was motivated by development planned for offshore Wind Energy Areas (WEAs) along the Atlantic coast of the US and the need to evaluate the effect of these development areas on commercial shipping. To this end, available AIS data were processed to generate commercial vessel tracks for individual vessels, though cargo vessels are the focus in this study. The individual vessel tracks were sampled at transects placed along the Atlantic coast. The transect samples were analysed and partitioned by voyages between Atlantic ports to facilitate computation of vessel routes between ports. The route boundary analysis utilised a definition from UK guidance in which routes' boundaries encompassed 95% of the vessel traffic between ports. In addition to delineating route boundaries, we found multi-modal transverse distributions of vessels for well-travelled routes, which indicated preference for lanes of travel within the delineated routes.
An underwater sound model was developed to simulate sound propagation from marine and hydrokinetic energy (MHK) devices or offshore wind (OSW) energy platforms. Finite difference methods were developed to solve the 3D Helmholtz equation for sound propagation in the coastal environment. A 3D sparse matrix solver with complex coefficients was formed for solving the resulting acoustic pressure field. The Complex Shifted Laplacian Preconditioner (CSLP) method was applied to solve the matrix system iteratively with MPI parallelization using a high performance cluster. The sound model was then coupled with the Finite Volume Community Ocean Model (FVCOM) for simulating sound propagation generated by human activities, such as construction of OSW turbines or tidal stream turbine operations, in a range-dependent setting. As a proof of concept, initial validation of the solver is presented for two coastal wedge problems. This sound model can be useful for evaluating impacts on marine mammals due to deployment of MHK devices and OSW energy platforms.
Offshore wind energy development is planned for areas off the Atlantic coast. Many of the planned wind development areas fall within traditional commercial vessel routes. In order to mitigate possible hazards to ships and to wind turbines, it is important to understand the potential for increased risk to commercial shipping from the presence of wind farms. Using Automatic Identification System (AIS) data, historical shipping routes between ports in the Atlantic were identified, from Maine to the Florida Straits. The AIS data were also used as inputs to a numerical model that can simulate cargo, tanker and tug/towing vessel movement along typical routes. The model was used to recreate present day vessel movement, as well as to simulate future routing that may be required to avoid wind farms. By comparing the present and future routing of vessels, a risk analysis was carried out to determine the increased marginal risk of vessel collisions, groundings, and allisions with stationary objects, due to the presence of wind farms. The outcome of the analysis showed little increase in vessel collisions or allisions, and a decrease in groundings as more vessels were forced seaward by the wind farms.
This report is an addendum to SAND2013-9040: Methodology for Design and Economic Analysis of Marine Energy Conversion (MEC) Technologies. This report describes an Oscillating Water Column Wave Energy Converter reference model design in a complementary manner to Reference Models 1-4 contained in the above report. In this report, a conceptual design for an Oscillating Water Column Wave Energy Converter (WEC) device appropriate for the modeled reference resource site was identified, and a detailed backward bent duct buoy (BBDB) device design was developed using a combination of numerical modeling tools and scaled physical models. Our team used the methodology in SAND2013-9040 for the economic analysis that included costs for designing, manufacturing, deploying, and operating commercial-scale MEC arrays, up to 100 devices. The methodology was applied to identify key cost drivers and to estimate levelized cost of energy (LCOE) for this RM6 Oscillating Water Column device in dollars per kilowatt-hour ($/kWh). Although many costs were difficult to estimate at this time due to the lack of operational experience, the main contribution of this work was to disseminate a detailed set of methodologies and models that allow for an initial cost analysis of this emerging technology. This project is sponsored by the U.S. Department of Energy's (DOE) Wind and Water Power Technologies Program Office (WWPTO), within the Office of Energy Efficiency & Renewable Energy (EERE). Sandia National Laboratories, the lead in this effort, collaborated with partners from National Laboratories, industry, and universities to design and test this reference model.
In recent years, there has been growing interest in harnessing in-stream tidal energy in response to concerns of increasing energy demand and to mitigate climate change impacts. While many studies have been conducted to assess and map tidal energy resources, efforts for quantifying the associated potential environmental impacts have been limited. This paper presents the development of a tidal turbine module within a three-dimensional unstructured-grid coastal ocean model and its application for assessing the potential environmental impacts associated with tidal energy extraction. The model is used to investigate in-stream tidal energy extraction and associated impacts on estuarine hydrodynamic and biological processes in a tidally dominant estuary. A series of numerical experiments with varying numbers and configurations of turbines installed in an idealized estuary were carried out to assess the changes in the hydrodynamics and biological processes due to tidal energy extraction. Model results indicated that a large number of turbines are required to extract the maximum tidal energy and cause significant reduction of the volume flux. Preliminary model results also indicate that extraction of tidal energy increases vertical mixing and decreases flushing rate in a stratified estuary. The tidal turbine model was applied to simulate tidal energy extraction in Puget Sound, a large fjord-like estuary in the Pacific Northwest coast.
This paper presents an application of a hydrodynamic model to simulate tidal energy extraction in a tidal dominated estuary in the Pacific Northwest coast. A series of numerical experiments were carried out to simulate tidal energy extraction with different turbine array configurations, including location, spacing and array size. Preliminary model results suggest that array optimization for tidal energy extraction in a real-world site is a very complex process that requires consideration of multiple factors. Numerical models can be used effectively to assist turbine siting and array arrangement in a tidal turbine farm for tidal energy extraction.
Abstract not provided.
Annex IV is an international collaborative project to examine the environmental effects of marine energy devices among countries through the International Energy Agency’s Ocean Energy Systems Initiative (OES). The U.S. Department of Energy (DOE) serves as the Operating Agent for the Annex, in partnership with the Bureau of Ocean Energy Management (BOEM; formerly the Minerals Management Service), the Federal Energy Regulatory Commission (FERC), and National Oceanographic and Atmospheric Administration (NOAA). Numerous ocean energy technologies and devices are being developed around the world, and the few data that exist about the environmental effects of these technologies are dispersed among countries and developers. The purpose of Annex IV is to facilitate efficient government oversight of the development of ocean energy systems by compiling and disseminating information about the potential environmental effects of marine energy technologies and to identify methods of monitoring for these effects. Beginning in 2010, this three-year effort produced a publicly available searchable online database of environmental effects information (Tethys). It houses scientific literature pertaining to the environmental effects of marine energy systems, as well as metadata on international ocean energy projects and research studies. Two experts’ workshops were held in Dublin, Ireland (September 2010 and October 2012) to engage with international researchers, developers, and regulators on the scope and outcomes of the Annex IV project. Metadata and information stored in the Tethys database and feedback obtained from the two experts’ workshops were used as resources in the development of this report. This Annex IV final report contains three case studies of specific interactions of marine energy devices with the marine environment that survey, compile, and analyze the best available information in one coherent location. These case studies address 1) the physical interactions between animals and tidal turbines; 2) the acoustic impact of marine energy devices on marine animals; and 3) the effects of energy removal on physical systems. Each case study contains a description of environmental monitoring efforts and research studies, lessons learned, and analysis of remaining information gaps. The information collected through the Annex IV effort and referenced in this report, can be accessed on the Tethys database at http://mhk.pnnl.gov/wiki/index.php/Tethys_ Home.
This Annex IV report contains three case studies of specific interactions of marine energy devices with the marine environment addressing the physical interactions between animals and tidal turbines, the acoustic impact of marine energy devices on marine animals, and the effects of energy removal on physical systems.
Hydrokinetic turbines will be a source of noise in the marine environment - both during operation and during installation/removal. High intensity sound can cause injury or behavioral changes in marine mammals and may also affect fish and invertebrates. These noise effects are, however, highly dependent on the individual marine animals; the intensity, frequency, and duration of the sound; and context in which the sound is received. In other words, production of sound is a necessary, but not sufficient, condition for an environmental impact. At a workshop on the environmental effects of tidal energy development, experts identified sound produced by turbines as an area of potentially significant impact, but also high uncertainty.