Search NASA⌕ Search

Engineering topics

Corradini, Michael L

Publications and source records attributed to Corradini, Michael L.

MELCOR Analysis of OSU Multi-Application Small Light Water Reactor (MASLWR) Experiment

A multi-application small light water reactor (MASLWR) conceptual design was developed by Oregon State University (OSU) with emphasis on passive safety systems. The passive containment safety system employs condensation and natural circulation to achieve the necessary heat removal from the containment in case of postulated accidents. Containment condensation experiments at the MASLWR test facility at OSU are modeled and analyzed with MELCOR, a system-level reactor accident analysis computer code. The analysis assesses its ability to predict condensation heat transfer in the presence of noncondensable gas for accidents where high-energy steam is released into the containment. This work demonstrates MELCOR’s ability to predict the pressure-temperature response of the scaled containment. Our analysis indicates that the heat removal rates are underestimated in the experiment due to the limited locations of the thermocouples and applies corrections to these measurements by conducting integral energy analyses along with CFD simulation for confirmation. Furthermore, the corrected heat removal rate measurements and the MELCOR predictions on the heat removal rate from the containment show good agreement with the experimental data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Assessment of MELCOR condensation models with the presence of noncondensable gas in natural convection flow regime

Condensation of steam vapor is an important mode of energy removal from the reactor containment. The presence of noncondensable gas complicates the process and makes it difficult to model. MELCOR, one of the more widely used system codes for containment analyses, uses the heat and mass transfer analogy to model condensation heat transfer. To investigate previously reported nodalization-dependence in natural convection flow regime, MELCOR condensation model as well as other models are studied. The nodalization-dependence issue is resolved by using physical length from the actual geometry rather than node size of each control volume as the characteristic length scale for MELCOR containment analyses. At the transition to turbulent natural convection regime, the McAdams correlation for convective heat transfer produces a better prediction compared to the original MELCOR model. The McAdams correlation is implemented in MELCOR and the prediction is validated against a set of experiments on a scaled AP600 containment. The MELCOR with our implemented model produces improved predictions. For steam molar fractions in the gas mixture greater than about 0.58, the predictions are within the uncertainty margin of the measurements. The simulation results still underestimate the heat transfer from the gas-steam mixture, implying that conservative predictions are provided.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Development of Accident Tolerant Fuel Options for Near Term Applications: Fuel Performance Modeling under Transient / Severe Accidents by MELCOR: PART I: Benchmark for SURRY: Short Term Station Black Out (STSBO)

Currently, existing LWR fuel technology is near its inherent limit of performance without improvement in fuel materials. As a result of the great earthquake of east Japan, along with the catastrophic tsunami, the Fukushima Daiichi boiling water plant was severely damaged. The light water reactors (LWRs) fuel gave rise to a serious discussion in the United States. In order to provide the development of Accident Tolerant Fuel (ATF) options for present day applications, MIT is leading a DOE project to search for enhanced accident tolerant fuels. Group members include MIT, UW-Madison, TAMU, AREVA, and Westinghouse. As part of the work, fuel performance modeling under transient / severe accidents: MELCOR is being used to analyze different kinds of materials under several limited accident conditions. While various research groups are obtaining the parameters of the experimental ATF materials, benchmarks for SURRY are being done by use of MELCOR in the University of Wisconsin-Madison. We chose version 1.8.6 for the edition of materials, and INL provided the uncertainty analysis between version 1.8.6 and version 2.1.0. Comparison will be done between potential ATF materials, which include FeCrAl, SiC, Cr, ZrSi, TiAlC, TiSiC and so on. Furthermore, zircaloy is used as the verification. Among all the parameters which influence the materials' performance, the temperature history and hydrogen generation will be the key factors in the future. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Comparison of Hyperelastic Models for Granular Materials

Three recently proposed hyperelastic models for granular materials are compared with experiment data. Though all three are formulated to give elastic moduli that are power law functions of the mean stress, they have rather different dependencies on individual stresses, and generally differ from well established experimental forms. Predicted static stress distributions are in qualitative agreement with experiments, but do not differ greatly from isotropic linear elasticity, and similarly fail to account for variability in experiment data that presumably occurs due to a preparation dependence of granular materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

HYPERELASTIC MODELS FOR GRANULAR MATERIALS

A continuum framework for modeling of dust mobilization and transport, and the behavior of granular systems in general, has been reviewed, developed and evaluated for reactor design applications. The large quantities of micron-sized particles expected in the international fusion reactor design, ITER, will accumulate into piles and layers on surfaces, which are large relative to the individual particle size; thus, particle-particle, rather than particle-surface, interactions will determine the behavior of the material in bulk, and a continuum approach is necessary and justified in treating the phenomena of interest; e.g., particle resuspension and transport. The various constitutive relations that characterize these solid particle interactions in dense granular flows have been discussed previously, but prior to mobilization their behavior is not even fluid. Even in the absence of adhesive forces between particles, dust or sand piles can exist in static equilibrium under gravity and other forces, e.g., fluid shear. Their behavior is understood to be elastic, though not linear. The recent “granular elasticity” theory proposes a non-linear elastic model based on “Hertz contacts” between particles; the theory identifies the Coulomb yield condition as a requirement for thermodynamic stability, and has successfully reproduced experimental results for stress distributions in sand piles. The granular elasticity theory is developed and implemented in a stand- alone model and then implemented as part of a finite element model, ABAQUS, to determine the stress distributions in dust piles subjected to shear by a fluid flow. We identify yield with the onset of mobilization, and establish, for a given dust pile and flow geometry, the threshold pressure (force) conditions on the surface due to flow required to initiate it. While the granular elasticity theory applies strictly to cohesionless granular materials, attractive forces are clearly important in the interaction of micron-sized particles; extension of the theory to account for these effects is also considered. A set of continuum models are proposed for use in the future dust transport modeling.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗