Engineering topics
Publications and source records attributed to Cosentino, L. S..
Composer converts binary data to optical form for storage as hologram. Device consists of an array of deformable metal membranes controlled by MOSFET's. Device is fast, produces high contrast ratios, does not degrade with extended use, and can be addressed from diverse angles.
Membrane page composers were made and were evaluated in a simulated holographic optical memory system. Calculated and experimentally determined electromechanical and optical characteristics of the circular membrane light valves used on the arrays are shown to be in close agreement. Several operating prototypes of 8 x 8 and 16 x 16 elements were produced. Measurements were made of switching time, optical contrast, and dynamic storage time of many cells on the devices. Digital patterns were stored in the arrays. The performance required of the page composer as a component of an optical memory system is considered. The fabrication techniques used can be easily extended to larger arrays.
The design, development, and implementation of a prototype, partially populated, million bit read-write holographic memory system using state-of-the-art components are described. The system employs an argon ion laser, acoustooptic beam deflectors, a holographic beam splitter (hololens), a nematic liquid crystal page composer, a photoconductor-thermoplastic erasable storage medium, a silicon P-I-N photodiode array, with lenses and electronics of both conventional and custom design. Operation of the prototype memory system was successfully demonstrated. Careful attention is given to the analysis from which the design criteria were developed. Specifications for the major components are listed, along with the details of their construction and performance. The primary conclusion resulting from this program is that the basic principles of read-write holographic memory system are well understood and are reducible to practice.
The feasibility of producing a page composer for optical memory systems using thin, deformable, membrane-mirror elements as light valves was investigated. The electromechanical and optical performances of such elements were determined both analytically and experimentally. It was found that fast switching (approximately 10 microseconds), high-contrast (10 or greater), fatigue-free operation over missions of cycles, and efficient utilization of input light could be obtained with membrane light valves. Several arrays of 64 elements were made on substrates with feedthroughs, allowing access to individual elements from the backside of the substrate. Single light valves on such arrays were successfully operated with the transistors designed and produced for selection and storage at each bit location. This simulated the operation of a prototype page composer with semiconductor chips beam-lead bonded to the back of the substrate.