Engineering topics

Courtney, T. H.

Publications and source records attributed to Courtney, T. H..

6 records

NASA NTRS1993

The kinetics of composite particle formation during mechanical alloying

The kinetics of composite particle formation during attritor milling of insoluble binary elemental powders have been examined. The effects of processing conditions (i.e., mill power, temperature, and charge ratio) on these kinetics were studied. Particle size distributions and fractions of elemental and composite particles were determined as functions of milling time and processing conditions. This allowed the deduction of phenomenological rate constants describing the propensity for fracture and welding during processing. For the mill-operating conditions investigated, the number of particles in the mill generally decreased with milling time, indicating a greater tendency for particle welding than fracture. Moreover, a bimodal size distribution is often obtained as a result of preferential welding. Copper and chromium 'alloy' primarily by encapsulation of Cr particles within Cu. This form of alloying also occurs in Cu-Nb alloys processed at low mill power and/or for short milling times. For other conditions, however, Cu-Nb alloys develop a lamellar morphology characteristic of mechanically alloyed two-phase ductile metals. Increasing mill power or charge (ball-to-powder weight) ratio (CR) increases the rate of composite particle formation.

Aikin, B. J. M.↗

NASA NTRS1993

Tungsten solution kinetics and amorphization of nickel in mechanically alloyed Ni-W alloys

The kinetics of solution of W, and the subsequent amorphization of Ni, in mechanically alloyed Ni-W alloys has been investigated. As W is a highly abrasive material in the energy intensive devices used for mechanical alloying, we studied the above reactions in different mills. One used hardened steel balls as the grinding media, and the other Al2O3. Abrasion is common to both mills, but Fe wear debris from the hardened steel enters into solution in the Ni rich phases whereas Al2O3 debris is present as small dispersoids. The kinetics of W solution and those of subsequent amorphization do not appear strongly affected by the Fe in solution or the Al2O3 dispersoid. Tungsten dissolves in crystalline Ni in amounts in excess of the equilibrium solubility during alloying. Amorphization of the Ni phase occurs if the W content in this phase exceeds ca. 28 at. pct.

Aning, A. O.↗

NASA NTRS1993

Milling dynamics. I - Attritor dynamics: Results of a cinematographic study

The motions of grinding media and powder in an attritor canister were studied by means of filming the agitated charge and frame-by-frame scrutiny of the footage. In conjunction with auxiliary experiments, this permitted semiquantitative analysis of the milling action. In particular, the mill can be divided into several regions characterized by different balances between direct impacts and rolling/sliding of the grinding media. Simple calculations suggest that impacts are more capable of effecting mechanical alloying (MA) than are rolling or sliding events in an attritor. Powder circulation within an operating mill was also investigated. Based on the results and the accompanying analysis, concepts for improved attritor design are presented.

Rydin, R. W.↗

NASA NTRS1992

Modeling of the mechanical alloying process

Two programs have been developed to compute the dimensional and property changes that occur with repetitive impacts during the mechanical alloying process. The more sophisticated of the programs also maintains a running count of the fractions of particles present and from this calculates a population distribution. The programs predict powder particle size and shape changes in accord with the accepted stages of powder development during mechanical alloying of ductile species. They also predict hardness and lamellar thickness changes with processing, again with reasonable agreement with experimental results. These predictions offer support of the model (and thereby give insight into the possible 'actual' happenings of mechanical alloying) and hence allow refinement and calibration of the myriad aspects of the model. They also provide a vehicle for establishing control over the dimensions and properties of the output powders used for consolidation, thereby facilitating optimization of the consolidation process.

Maurice, D.↗

NASA NTRS1992

Milling and mechanical alloying of inorganic nonmetallics

The versatility of high energy grinding for instigating mechanochemical reactions in inorganic systems has been studied. High-energy grinding can be used to produce amorphous carbon from synthetic graphite and some forms of natural graphite. Elemental sulfur can be amorphized by prolonged energy grinding. The presence of iron resulting from wear of the grinding media strongly affects phase transformations of alphaFe2O3 and mechanochemical reactions of this phase with ZnO and NiO. Data obtained confirm that low-temperature mechanochemical method is a robust process route for production of a wide range of materials.

Kosmac, T.↗

NASA NTRS1991

Sintering of two phase lamellar microstructures

The effect of an inert phase on neck growth rates during sintering of lamellar structures is described. Sintering diagrams are constructed for an aggregate of two-phase Cu spheres with lamellar microstructure containing an inert phase. It is shown that the regions corresponding to lattice diffusion domination shrink due to the inert phase presence. As the dispersion becomes finer, the alterations in the map become substantial.

Courtney, T. H.↗