Search NASA⌕ Search

Engineering topics

Cramer, Christopher J.

Publications and source records attributed to Cramer, Christopher J..

At least 73 records · Page 4

Assessment of electronic structure methods for the determination of the ground spin states of Fe( ii ), Fe( iii ) and Fe( iv ) complexes

Our ability to understand and simulate the reactions catalyzed by iron depends strongly on our ability to predict the relative energetics of spin states. In this work, we studied the electronic structures of Fe 2+ ion, gaseous FeO and 14 iron complexes using Kohn–Sham density functional theory with particular focus on determining the ground spin state of these species as well as the magnitudes of relevant spin-state energy splittings. The 14 iron complexes investigated in this work have hexacoordinate geometries of which seven are Fe(II), five are Fe(III) and two are Fe(IV) complexes. These are calculated using 20 exchange–correlation functionals. In particular, we use a local spin density approximation (LSDA) – GVWN5, four generalized gradient approximations (GGAs) – BLYP, PBE, OPBE and OLYP, two non-separable gradient approximations (NGAs) – GAM and N12, two meta-GGAs – M06-L and M11-L, a meta-NGA – MN15-L, five hybrid GGAs – B3LYP, B3LYP*, PBE0, B97-3 and SOGGA11-X, four hybrid meta-GGAs – M06, PW6B95, MPW1B95 and M08-SO and a hybrid meta-NGA – MN15. The density functional results are compared to reference data, which include experimental results as well as the results of diffusion Monte Carlo (DMC) calculations and ligand field theory estimates from the literature. For the Fe 2+ ion, all functionals except M11-L correctly predict the ground spin state to be quintet. However, quantitatively, most of the functionals are not close to the experimentally determined spin-state splitting energies. For FeO all functionals predict quintet to be the ground spin state. For the 14 iron complexes, the hybrid functionals B3LYP, MPW1B95 and MN15 correctly predict the ground spin state of 13 out of 14 complexes and PW6B95 gets all the 14 complexes right. Here, the local functionals, OPBE, OLYP and M06-L, predict the correct ground spin state for 12 out of 14 complexes. Two of the tested functionals are not recommended to be used for this type of study, in particular M08-SO and M11-L, because M08-SO systematically overstabilizes the high spin state, and M11-L systematically overstabilizes the low spin state.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Prediction of Mass Spectral Response Factors from Predicted Chemometric Data for Druglike Molecules

A method is developed for the prediction of mass spectral ion counts of drug-like molecules using in silico calculated chemometric data. Various chemometric data, including polar and molecular surface areas, aqueous solvation free energies, and gas-phase and aqueous proton affinities were computed, and a statistically significant relationship between measured mass spectral ion counts and the combination of aqueous proton affinity and total molecular surface area was identified. In particular, through multilinear regression of ion counts on predicted chemometric data, we find that log{sub 10}(MS ion counts) = –4.824 + c{sub 1}•PA + c{sub 2}•SA, where PA is the aqueous proton affinity of the molecule computed at the SMD(aq)/M06-L/MIDI!//M06-L/MIDI! level of electronic structure theory, SA is the total surface area of the molecule in its conjugate base form, and c{sub 1} and c{sub 2} have values of –3.912 × 10{sup –2} mol kcal{sup –1} and 3.682 × 10{sup –3} Å{sup –2}. On a 66-molecule training set, this regression exhibits a multiple R value of 0.791 with p values for the intercept, c{sub 1}, and c{sub 2} of 1.4 × 10{sup –3}, 4.3 × 10{sup –10}, and 2.5 × 10{sup –6}, respectively. Application of this regression to an 11-molecule test set provides a good correlation of prediction with experiment (R = 0.905) albeit with a systematic underestimation of about 0.2 log units. This method may prove useful for semiquantitative analysis of drug metabolites for which MS response factors or authentic standards are not readily available. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Generalized-active-space pair-density functional theory: an efficient method to study large, strongly correlated, conjugated systems

Predicting ground- and excited-state properties of open-shell organic molecules by electronic structure theory can be challenging because an accurate treatment has to correctly describe both static and dynamic electron correlation. Strongly correlated systems, i.e., systems with near-degeneracy correlation effects, are particularly troublesome. Multiconfigurational wave function methods based on an active space are adequate in principle, but it is impractical to capture most of the dynamic correlation in these methods for systems characterized by many active electrons. Here, we recently developed a new method called multiconfiguration pair-density functional theory (MC-PDFT), that combines the advantages of wave function theory and density functional theory to provide a more practical treatment of strongly correlated systems. Here we present calculations of the singlet–triplet gaps in oligoacenes ranging from naphthalene to dodecacene. Calculations were performed for unprecedently large orbitally optimized active spaces of 50 electrons in 50 orbitals, and we test a range of active spaces and active space partitions, including four kinds of frontier orbital partitions. We show that MC-PDFT can predict the singlet–triplet splittings for oligoacenes consistent with the best available and much more expensive methods, and indeed MC-PDFT may constitute the benchmark against which those other models should be compared, given the absence of experimental data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Atomic layer deposition in a metal–organic framework: Synthesis, characterization, and performance of a solid acid

NU-1000, a zirconium-based metal-organic framework featuring mesoporous channels, has been post-synthetically metalated via atomic layer deposition in MOF (AIM) employing dimethylaluminum iso-propoxide ([AlMe 2 i OPr] 2 – DMAI), a milder precursor than widely used trimethylaluminum (AlMe 3 - TMA). The aluminum-modified NU-1000 (Al-NU-1000) has been characterized with a comprehensive suite of techniques that points to the formation of aluminum oxide clusters well dispersed through the framework and stabilized by confinement within small pores intrinsic to the NU-1000 structure. Experimental evidence allows for identification of spectroscopic similarities between Al-NU-1000 and γ-Al 2 O 3 . Density functional theory modeling provides structures and simulated spectra the relevance of which can be assessed via comparison to experimental IR and EXAFS data. As a result, the catalytic performance of Al-NU-1000 has been benchmarked against γ-Al 2 O 3 , with promising results in terms of selectivity.

36 MATERIALS SCIENCE↗

Tuning the properties of metal–organic framework nodes as supports of single-site iridium catalysts: node modification by atomic layer deposition of aluminium

The metal–organic framework NU-1000, with Zr 6 -oxo, hydroxo, and aqua nodes, was modified by incorporation of hydroxylated Al( iii ) ions by ALD-like chemistry with [Al(CH 3 ) 2 (iso-propoxide)] 2 followed by steam (ALD = atomic layer deposition). Al ions were installed to the extent of approximately 7 per node. Single-site iridium diethylene complexes were anchored to the nodes of the modified and unmodified MOFs by reaction with Ir(C 2 H 4 ) 2 (acac) (acac = acetylacetonate) and converted to Ir(CO) 2 complexes by treatment with CO. Infrared spectra of these supported complexes show that incorporation of Al weakened the electron donor tendency of the MOF. Correspondingly, the catalytic activity of the initial supported iridium complexes for ethylene hydrogenation increased, as did the selectivity for ethylene dimerization. The results of density functional theory calculations with a simplified model of the nodes incorporating Al( iii ) ions are in qualitative agreement with some catalyst performance data.

catalysis (heterogeneous), materials and chemistry↗

Partial Fluorination as a Strategy for Crystal Engineering of Rubrene Derivatives

Through a close examination of the intermolecular interactions of rubrene (1a) and select derivatives (1b–1p), a clearer understanding of why certain fluorinated rubrene derivatives pack with planar tetracene backbones has been achieved. In this study we synthesized, crystallized, and determined the packing structure of new rubrene derivatives (1h–p). Previously, we proposed that introducing electron-withdrawing CF3 substituents induced planarity by reducing intramolecular repulsion between the peripheral aryl groups (1e–g). However, we found that in most cases, further increasing the fluorine content of rubrene lead to twisted tetracene backbones in the solid state. To understand how rubrene (1a) and its derivatives (1b–p) pack in the solid state, we (re)examined the crystal structures through a systematic study of the close contacts. We found that planar tetracene cores occur when close contacts organize to produce an S symmetry element about a given rubrene molecule. Here, we report the first instance of rubrene derivatives (1l and 1n) that pack in a two-dimensional brick motif. The prospects for new rubrene derivatives in semiconductors were estimated by calculating the reorganization energies of the monomers and transfer integrals of the dimers we observed. Our work allows for the rational design and improved crystal engineering of new rubrene derivatives.

36 MATERIALS SCIENCE↗

Tuning the Surface Chemistry of Metal Organic Framework Nodes: Proton Topology of the Metal-Oxide-Like Zr 6 Nodes of UiO-66 and NU-1000

Some metal organic frameworks (MOFs) incorporate nodes that are nanoscale metal oxides, and the hydroxycontaining functional groups on them provide opportunities for introducing catalytic sites with precisely defined structures. Investigations have been done to understand the structures of these groups on nodes and node vacancies, because, in prospect, atomic-scale modulation of the composition, areal density, and/or siting of the groups would open up possibilities for exquisite tuning of the siting and performance of subsequently anchored catalytic units (e.g., single metal ions, pairs of metal ions, or well-defined metal-ion-containing clusters). In this work we have combined infrared (IR) spectroscopy and density functional theory (DFT) to demonstrate tuning of these sites, namely, hydrogen-bonded OH/OH 2 groups on the Zr 6 nodes of the MOFs UiO-66 and NU-1000 via the intermediacy of node methoxy (or ethoxy) groups formed from methanol (or ethanol). Methoxy (or ethoxy) groups on node vacancy sites are converted to a structure incorporating one vacant Zr site and one terminal OH group per face by reaction with water. Our results highlight how the combination of DFT and IR spectroscopy facilitates the determination of the identity and chemistry of the functional groups on MOF node vacancies and defect sites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computational Study of First-Row Transition Metals Supported on MOF NU-1000 for Catalytic Acceptorless Alcohol Dehydrogenation

Metal–organic frameworks (MOF) are a versatile family of mesoporous materials that can be used as solid supports to design well-defined catalytic sites. Herein we employ density functional theory (DFT) to evaluate first-row transition metals deposited on the MOF NU-1000 for acceptorless alcohol dehydrogenation, a reaction of great interest in hydrogen production and storage. The proposed mechanism we report reveals that the MOF support plays an active role in proton-transfer processes. The computational screening of first-row transition metals highlights Ni- and Co-derivatives as potential catalysts for the title reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Computationally Guided Discovery of a Catalytic Cobalt-Decorated Metal–Organic Framework for Ethylene Dimerization

The catalytic performance of a cobalt(II) single-site catalyst supported on the zirconia-like nodes of the metal organic–framework (MOF) NU-1000 is herein characterized by quantum chemical methods and compared to an iso-structural analogue incorporating nickel(II) as the active transition metal. The mechanisms of atomic layer deposition in MOFs and of catalysis are examined using density functional theory. We compare the catalytic activity of Co and Ni installed on the zirconia-like nodes for ethylene dimerization, considering three plausible pathways. We employ multiconfigurational wave function theory methods to further characterize the electronic structures of key transition states and intermediates. Finally, we report confirmation of Co catalytic activity for ethylene dimerization from experiments that were prompted by the computational prediction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Transitions of the Metal-Oxide Nodes within Metal–Organic Frameworks: On the Local Structures of NU-1000 and UiO-66

In situ pair distribution function (PDF) analyses and density functional theory (DFT) computations are used to probe local structural transitions of M6O8 nodes found in two metal organic frameworks (MOFs), NU-1000 and UiO-66, for M = Zr, Hf. Such transitions are found to occur without change to the global framework symmetry at temperatures within a range relevant to many potential MOF applications. For the particular M6(O)8 nodes studied here, the observed distortions can be mapped to polymorphic forms known for bulk ZrO2. In the MOF framework, however, node distortions are found to occur at substantially lower temperature than analogous distortions in bulk ZrO2 owing to the nanoscale nature of the former.

Platero-Prats, Ana E.↗

Sintering-resistant Single-Site Nickel Catalyst Supported by Metal-Organic Framework

Developing supported single-site catalysts is an important goal in heterogeneous catalysis, since the well-defined active sites afford opportunities for detailed mechanistic studies, thereby facilitating the design of improved catalysts. We present herein a method for installing Ni ions uniformly and precisely on the node of a Zr-based MOF, NU-1000, in high density and large quantity (denoted as Ni-AIM) using atomic layer deposition (ALD) in a metal–organic framework (MOF) (AIM). Ni-AIM is demonstrated to be an efficient gas-phase hydrogenation catalyst upon activation. The structure of the active sites in Ni-AIM is proposed, revealing its single-site nature. More importantly, due to the organic linker used to construct the MOF support, the Ni ions stay isolated throughout the hydrogenation catalysis, in accord with its long-term stability. A quantum chemical characterization of the catalyst and the catalytic process complements the experimental results. With validation of computational modeling protocols, we further targeted ethylene oligomerization catalysis by Ni-AIM guided by theoretical prediction. Given the generality of the AIM methodology, this emerging class of materials should prove ripe for the discovery of new catalysts for the transformation of volatile substrates.

Li, Zhanyong↗