Engineering topics

Crossley, F. R. E.

Publications and source records attributed to Crossley, F. R. E..

3 records

NASA NTRS1977

Design for a three-fingered hand

This paper describes the construction of a prototype mechanical hand or 'end effector' for use on a remotely controlled robot, but with possible application as a prosthetic device. An analysis of hand motions is reported, from which it is concluded that the two most important manipulations (apart from grasps) are to be able to pick up a tool and draw it into a nested grip against the palm, and to be able to hold a pistol-grip tool such as an electric drill and pull the trigger. One of our models was tested and found capable of both these operations.

Crossley, F. R. E.↗

NASA NTRS1975

Design for a Three-Fingered Hand

A general purpose end-effector for use on the space manipulator proposed for the shuttle program was developed. The end-effector has the capabilities of a human hand and peel-off value as a human prosthetic device. The design evolved through two mock-up stages. The final form contains four electric motors. While thumb and forefinger bend, their ultimate phalanges maintain a parallel stance to one another. The grip centerline is at 45 degrees to the mounting base.

Crossley, F. R. E.↗

NASA NTRS1975

Design and fabrication of an end effector

The construction is described of a prototype mechanical hand or 'end effector' for use on a remotely controlled robot, but with possible application as a prosthetic device. An analysis of hand motions is reported, from which it is concluded that the two most important manipulations (apart from grasps) are to be able to pick up a tool and draw it into a nested grip against the palm, and to be able to hold a pistol-grip tool such as an electric drill and pull the trigger. A model was tested and found capable of both these operations.

Crossley, F. R. E.↗