Engineering topics

Crowhurst, Jonathan C.

Publications and source records attributed to Crowhurst, Jonathan C..

17 records

DOE OSTI2024

An Investigation of Oxides of Tantalum Produced by Pulsed Laser Ablation and Continuous Wave Laser Heating

Recent progress has seen multiple Ta 2 O 5 polymorphs generated by different synthesis techniques. However, discrepancies arise when these polymorphs are produced in widely varying thermodynamic conditions and characterized using different techniques. This work aimed to characterize and compare Ta 2 O 5 particles formed at high and low temperatures using nanosecond pulsed laser ablation (PLA) and continuous wave (CW) laser heating of a local area of tantalum in either air or an 18 O 2 atmosphere. Scanning electron microscopy (SEM) and Raman spectroscopy of the micrometer-sized particles generated by PLA were consistent with either a localized amorphous Ta 2 O 5 phase or a similar, but not identical, crystalline β-Ta 2 O 5 phase. The Raman spectrum of the material formed at the point of CW laser impingement was in good agreement with the previously established ceramic “H-Ta 2 O 5 ” phase. TEM and electron diffraction analysis of these particles indicated the phase structure matched an oxygen-vacated superstructure of monoclinic H-Ta 2 O 5 . Further from the point of laser impingement, CW heating produced particles with a Raman spectrum that matched β-Ta 2 O 5 . We confirmed that the high-temperature ceramic phase characterized in previous work by Raman spectroscopy was the same monoclinic phase characterized in different work by TEM and could be produced by direct laser heating of metal in air.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Using double pulse laser ablation in air to enhance the strength of laser-driven shocks

In the process of multi-pulse laser ablation, inter-pulse delay time, Δ t , is known to be an important parameter for maximizing ablation efficiency as well as impulse imparted to the target. In this work, using photon Doppler velocimetry, we show that for single pairs of colinear pulses (1064 nm, 8 ns, ∼ 60 J cm -2 per pulse) in air, the peak free surface velocity of the back surface of an aluminum target (125 µm thick) is increased, by a factor of nearly 3, when Δ t = 10 microseconds, compared with both pulses arriving simultaneously (Δ t = 0). Fast imaging of the ablation process suggests this enhancement is due to rarefaction of the contiguous air in the passage of the leading shock produced by ablation, which then in turn allows a larger fraction of the energy of the second pulse to reach the target surface. This interpretation is strengthened by additional experiments in which the two pulses do not overlap on the target surface, but the shock strength is nevertheless enhanced. Given a fixed energy budget this work suggests a prescription for maximizing laser-driven shock strength by judicious choice of inter-pulse delay.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2023

A comparative study of cerium oxides formed by pulsed laser ablation and continuous wave laser heating

Abstract The formation of Ce 2 O 3 from cerium metal requires complex reducing conditions. Alternatively, we show that different stoichiometries and structures of cerium oxides can be generated in high‐temperature laser experiments by varying the availability of oxygen and the use of either pulsed laser ablation (PLA) or continuous wave (CW) laser heating of cerium metal. X‐ray diffraction and Raman spectroscopy suggest that a low structural order Ce 2 O 3 /CeO 2 mixed structure is formed in a 1% O 2 atmosphere with PLA. For CW heating in a 1% O 2 environment, Raman measurements show the formation of crystalline A‐type Ce 2 O 3 in proximity to the point of laser impingement. These experiments were repeated in 18 O 2 and allowed us to report for the first time the corresponding Raman spectrum of Ce 2 18 O 3 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Comparative analysis of sublimation and thermal decomposition of TATB

This experimental study investigated the effects of confinement, starting mass, and heating rate on TATB thermal decomposition and sublimation using a combined Thermo-Gravimetric Analyzer and Differential Scanning Calorimetry (TGA/DSC) instrument. The confinement of volatile products was varied using different pinhole sizes with TGA/DSC pans. The measurements showed the open pan experiments without lids/pinholes resulted in complete sublimation of TATB between 320 °C and 360 °C. The heat of sublimation was determined to be 176 kJ/mol (42 kcal /mol), consistent with literature data obtained from other experimental techniques. The use of pinholes suppressed the sublimation of TATB such that the decrease in pinhole size resulted in 1) an increase in the enthalpy of reaction and an increase in the amount of carbonaceous material remaining at the end of decomposition, and 2) convergence of the two peak temperatures corresponding to maximum heat flow and maximum weight loss. Also, a transition from a two-exotherm thermal decomposition behavior towards a single-exotherm occurred as the pinhole size was decreased for a given starting mass or as the starting mass was increased for a given pinhole size. These results indicate the kinetics of TATB sublimation, TATB thermal decomposition, and gas diffusion out of a TGA/DSC pan can all compete and result in significantly different enthalpies, amounts of remaining materials, and peak temperatures depending on the pinhole size and starting mass used in the measurements. Furthermore, the results also indicate precise control of process variables (pinhole size, starting mass, and heating rate) in TGA/DSC measurements is required for thermal safety assessment of explosives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Extreme synthesis of crystalline aerogel materials from amorphous aerogel precursors

In one embodiment, a composition of matter includes a crystalline porous structure having a density in a range from about 30 to about 50 mg/cm 3 . In another embodiment, a kit includes an amorphous, porous material, an inert pressure medium, a heating source, and a sample chamber configured to withstand an applied pressure of at least about 20 GPa. Other aspects and embodiments of the present invention will become apparent from the following detailed description, which, when taken in conjunction with the drawings, illustrate by way of example the principles of the invention.

Pauzauskie, Peter J.↗

DOE OSTI2023

Tamper performance for confined laser drive applications

The shock imparted by a laser beam striking a metal surface can be increased by the presence of an optically transparent tamper plate bonded to the surface. We explore the shock produced in an aluminum slab, for a selection of tamper materials and drive conditions. The experiments are conducted with a single-pulse laser of maximum fluence up to 100 J/cm 2 . The pressure and impulse are measured by photon doppler velocimetry, while plasma imaging is used to provide evidence of nonlinear tamper absorption. We demonstrate a pressure enhancement of 50x using simple commercially available optics. We compare results from hard dielectric glasses such as fused silica to soft plastics such as teflon tape. We discuss the mechanism of pressure saturation observed at high pulse fluence, along with some implications regarding applications. Below saturation, overall dependencies on pulse intensity and material parameters such as mechanical impedances are shown to correlate with a model by Fabbro et al .

36 MATERIALS SCIENCE↗

DOE OSTI2023

Stochastic optimization of a uranium oxide reaction mechanism using plasma flow reactor measurements

Abstract In this work, a coupled Monte Carlo Genetic Algorithm (MCGA) approach is used to optimize a gas phase uranium oxide reaction mechanism based on plasma flow reactor (PFR) measurements. The PFR produces a steady Ar plasma containing U, O, H, and N species with high temperature regions (3000–5000 K) relevant to observing UO formation via optical emission spectroscopy. A global kinetic treatment is used to model the chemical evolution in the PFR and to produce synthetic emission signals for direct comparison with experiments. The parameter space of a uranium oxide reaction mechanism is then explored via Monte Carlo sampling using objective functions to quantify the model-experiment agreement. The Monte Carlo results are subsequently refined using a genetic algorithm to obtain an experimentally corroborated set of reaction pathways and rate coefficients. Out of 12 reaction channels targeted for optimization, four channels are found to be well constrained across all optimization runs while another three channels are constrained in select cases. The optimized channels highlight the importance of the OH radical in oxidizing uranium in the PFR. This study comprises a first step toward producing a comprehensive experimentally validated reaction mechanism for gas phase uranium molecular species formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Isolating Chemical Reaction Mechanism as a Variable with Reactive Coarse-Grained Molecular Dynamics: Step-Growth versus Chain-Growth Polymerization

Here we present a general approach to isolate chemical reaction mechanism as an independently controllable variable across chemically distinct systems. Modern approaches to reduce the computational expense of molecular dynamics simulations often group multiple atoms into a single “coarse-grained” interaction site, which leads to a loss of chemical resolution. In this work we convert this shortcoming into a feature and use identical coarse-grained models to represent molecules that share nonreactive characteristics but react by different mechanisms. As a proof of concept, we use this approach to simulate and investigate distinct, yet similar, trifunctional isocyanurate resin formulations that polymerize by either chain- or step-growth. Because the underlying molecular mechanics of these models are identical, all emergent differences are a function of the reaction mechanism only. We find that the microscopic morphologies resemble related all-atom simulations and that simulated mechanical testing reasonably agrees with experiment.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Vibrational Spectra of HNIW and its Isotopologues: A Combined Experimental and Computational Study

Incorporating isotopically labelled materials in degradation experiments could help unravel the mechanism(s) of decomposition through use of the kinetic isotope effect. Characterizing synthesized isotopologues however requires an understanding of what observable signals are affected by the isotopic substitution. As vibrational spectroscopy can distinguish between isotopologues, it is an ideal characterization technique to evaluate isotopic variants. To this end, the vibrational spectra of HNIW and its deuterated ( 2 H), 13 C, 15 N (all), 15 N (nitro), and 18 O isotopologues have been computationally predicted in the gas phase using density functional theory. These results are compared to experimentally measured FTIR/ATR and Raman spectra of both unsubstituted HNIW and 15 N-labeled HNIW in which the six nitro groups were synthetically tagged with 15 N atoms ( 15 N nitro -HNIW). The experimental isotopic frequency shift for the -NO 2 asymmetric stretching frequencies agrees with that theoretically calculated (~35.7 cm-1 vs. 36.5cm-1, respectively). Furthermore, analysis of the theoretically predicted frequency shifts for all isotopologues suggest the -NO 2 bending modes are lower in frequency than previously reported. This assignment is supported by the experimentally measured isotopic shift of ~10.1 cm -1 for these features (consistent with the predicted shift of ~13.1 cm -1 ). This work expands our current understanding of the vibrational modes in HNIW as well as provides a method for future work on similar systems.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Investigating laser ablated plume dynamics of carbon and aluminum targets

Recently acquired high-resolution images of nanosecond laser ablation plumes suggest a strong correlation between the internal plume structure and the type of material being ablated. However, the details of this relation are currently not well understood. In this work, we attempt to explore this correlation using a 2D radiation hydrodynamics model to study the dependence of internal plume structure formation on the ablation material. Here spatio-temporal emission maps and plume expansion velocities from experimental measurements are compared with the model predictions, including synthetic emission maps. The shape and expansion rate of an outer air plume region are found to be in good agreement for both carbon and aluminum, as are the inner material plume dynamics for carbon ablation. The largest disagreement is observed in the case of a polished aluminum target, where the chaotic inner plume features seen in the experimental images are not observed in the model. The possible physical mechanisms responsible for this discrepancy are discussed. This effort constitutes a continued development toward a predictive model of ablation plume dynamics and chemistry for various materials in extreme environments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

The effect of oxygen concentration on the speciation of laser ablated uranium

Abstract In order to model the fate and transport of particles following a nuclear explosion, there must first be an understanding of individual physical and chemical processes that affect particle formation. One interaction pertinent to fireball chemistry and resultant debris formation is that between uranium and oxygen. In this study, we use laser ablation of uranium metal in different concentrations of oxygen gas, either 16 O 2 or 18 O 2 , to determine the influence of oxygen on rapidly cooling uranium. Analysis of recovered particulates using infrared absorption and Raman spectroscopies indicate that the micrometer-sized particulates are predominantly amorphous UO x (am-UO x , where 3 ≤ x ≤ 4) and UO 2 after ablation in 1 atm of pure O 2 and a 1% O 2 /Ar mixture, respectively. Energy dispersive X-ray spectroscopy (EDS) of particulates formed in pure O 2 suggest an O/U ratio of ~ 3.7, consistent with the vibrational spectroscopy analysis. Both am-UO x and UO 2 particulates convert to α-U 3 O 8 when heated. Lastly, experiments performed in 18 O 2 environments show the formation of 18 O-substituted uranium oxides; vibrational frequencies for am-U 18 O x are reported for the first time. When compared to literature, this work shows that cooling timescales can affect the structural composition of uranium oxides (i.e., crystalline vs. amorphous). This indicator can be used in current models of nuclear explosions to improve our predicative capabilities of chemical speciation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

The influence of cooling rate on condensation of iron, aluminum, and uranium oxide nanoparticles

Fundamental observations of particle size distributions are needed to develop models that predict the fate and transport of radioactive materials in the atmosphere following a nuclear incident. The extent of material transport is influenced by the time scales of particle formation processes (e.g., condensation, coagulation). In this study, we investigated the influence of cooling time scales on size distributions of uranium, aluminum, and iron oxide particles that are synthesized separately under identical run conditions inside the controlled environment of an argon plasma flow reactor. Two distinct temperature distributions are imposed along the flow reactor by varying the argon flow rate downstream of the plasma torch. The vaporized reactants of uranium, aluminum, and iron are cooled from about 5000K to 1000K before they are collected on silicon wafers for ex situ scanning electron microscope analysis. The microscope images show that the sizes of the largest aluminum and iron oxide particles heavily depend on the cooling time scales, whereas significant size variation with cooling rate is not observed for uranium oxide particles. In addition, the size distribution of aluminum oxide particles exhibits the broadest range among all three metal oxides studied. We performed simulations of particle size distributions using a kinetic model that couples gas phase oxidation chemistry with particle formation processes, including nucleation, condensation, and coagulation. The model results demonstrate the strong sensitivity of particle size distribution to different cooling histories (i.e., temperature vs residence time) along the flow reactor. In conclusion, the kinetic model also helps identify directions for future research to improve the predictions.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Optical spectroscopy and modeling of uranium gas-phase oxidation: Progress and perspectives

We report that studies related to U gas-phase oxidation through plasma- and thermo-chemistry are important for many fields, including environmental monitoring, forensic analysis, debris analysis in a weapon detonation event, and nucleation physics. Recently, significant efforts have been made to understand the chemical pathways involved in the progression from U atoms to diatoms (UO) and polyatomic molecules (UxOy), employing optical spectroscopy tools and computational modeling. In many studies, laser ablation of U or a U-containing flow reactor are used as a highly resource-efficient, repeatable, tunable, and lab-scale testbed for studying gas-phase oxidation in U plasmas. The spectroscopic analysis of high-temperature gas-phase oxidation of U is challenging due to the congested U spectra, resolution limitations of instrumentation, and the numerous chemical reaction pathways possible. This article focuses on the current understanding and challenges related to studying U plasma chemistry, specifically U gas-phase oxidation and molecular formation, via optical spectroscopy of plasmas and associated computational and spectral modeling. The physical and chemical processes involved in the evolution from U atoms to U oxide molecules to nanoparticles and agglomerates (i.e., debris) are discussed in the context of optical spectroscopic studies. The article concludes by highlighting opportunities for future research efforts based on existing knowledge published in the literature.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2021

Experimental Investigation of the Thermal Decomposition Pathways and Kinetics of TATB by Isotopic Substitution

Real-time measurements of the product gases arising from the thermal decomposition of triamino-trinitro benzene (TATB), its deuterated analogue, and plastically bonded TATB (LX-17) are presented in this study. Gas-phase decomposition products are identified by IR absorption spectroscopy. The frequency shifts in rovibrational spectra due to isotopic substitution and the change in rate of formation of decomposition products due to the kinetic-isotope-effect (KIE) help elucidate the decomposition pathways. The formation of H 2 O precedes other molecules (e.g., HCN, HNCO) during decomposition. After the concentrations of HCN and HNCO molecules reach a peak, their amounts gradually decrease. The concentrations of the other decomposition products (e.g., NH 3 and CO 2 ) rapidly rise after an induction period, which is attributed to the presence of autocatalytic reactions. The trends of chemical evolution are similar for all the samples, but their kinetic behaviors are different. This indicates the rates of consistent pathways are changed during thermal decomposition. Additionally, the kinetics of deuterated TATB decomposition is slower than that of unsubstituted TATB due to the KIE (kH/kD~1.41). The rate of LX-17 decomposition is slightly lower than unsubstituted TATB (k TATB /k LX-17 ~1.15). The KIE is more pronounced during the early stage of decomposition, which is attributed to the first steps of TATB decomposition involving water formation (i.e., H vs D transfer). The KIE slows down the formation of all gases, including those lacking hydrogen (e.g., CO 2 ). These results suggest the TATB thermal decomposition mechanism might involve a series of pathways rather than a set of independent and parallel reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Spectroscopic Signatures of MQ-Resins in Silicone Elastomers

Polysiloxane elastomers have a large application space due to their versatile cross-linking chemistry and highly tunable physical and mechanical properties. One approach for improving the mechanical integrity of commercial polysiloxane “silicone” elastomers while maintaining their optical transparency is the addition of small, silicone-resin molecules to the network. However, both the poly(dimethylsiloxane) (PDMS) network and the silicone-resin particles have an amorphous structure and complex chemistry, which makes the characterization of their structural properties and segmental network dynamics difficult. Here, we report the synthesis and characterization of a series of model silicone networks modified with a specific class of silicone-resin known as MQ-resin using Raman and advanced nuclear magnetic resonance (NMR) spectroscopy methods. Raman spectroscopy was successfully used to quantify the contribution of the MQ-resin to the network, to determine the type of MQ-resin present in the network, and to investigate the completeness of the network cross-linking reaction. Furthermore, solid-state and 1H double-quantum (DQ) NMR spectroscopies were used not only as a detection method for the MQ-resins but also to quantify changes in the segmental dynamics of the network as a function of MQ-resin concentration. The combination of Raman and NMR spectroscopies describes a series of samples where the MQ-resin particles and PDMS chains maintain their independent segmental dynamics up to high concentrations of MQ-resins (40–50% MQ), where the physical properties of the resin dominate the physical properties of the overall network. The results from our spectroscopic analyses are consistent with the results from macroscopic characterization techniques such as solvent uptake and mechanical testing. The spectroscopic insights into the structure–property relationships of PDMS-MQ composites presented in this study are a valuable tool not only for the synthesis and reverse engineering of future generations of commercial silicone elastomers but also for understanding the mechanisms of aging and degradation over the material lifetime.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Observation of Fundamental Mechanisms in Compression-Induced Phase Transformations Using Ultrafast X-ray Diffraction

As theoretically hypothesized for several decades in group IV transition metals, we have discovered a dynamically stabilized body-centered cubic (bcc) intermediate state in Zr under uniaxial loading at sub-nanosecond timescales. Under ultrafast shock wave compression, rather than the transformation from α-Zr to the more disordered hex-3 equilibrium ω-Zr phase, in its place we find the formation of a previously unobserved nonequilibrium bcc metastable intermediate. We probe the compression-induced phase transition pathway in zirconium using time-resolved sub-picosecond x-ray diffraction analysis at the Linac Coherent Light Source. We also present molecular dynamics simulations using a potential derived from first-principles methods which independently predict this intermediate phase under ultrafast shock conditions. In contrast with experiments on longer timescale (> 10 ns) where the phase diagram alone is an adequate predictor of the crystalline structure of a material, our recent study highlights the importance of metastability and time dependence in the kinetics of phase transformations.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Experimental Investigation of Uranium Volatility during Vapor Condensation

The predictive models that describe the fate and transport of radioactive materials in the atmosphere following a nuclear incident (explosion or reactor accident) assume that uranium-bearing particulates would attain chemical equilibrium during vapor condensation. Here, we show that kinetically driven processes in a system of rapidly decreasing temperature can result in substantial deviations from chemical equilibrium. This can cause uranium to condense out in oxidation states (e.g., UO 3 vs UO 2 ) that have different vapor pressures, significantly affecting uranium transport. To demonstrate this, we synthesized uranium oxide nanoparticles using a flow reactor under controlled conditions of temperature, pressure, and oxygen concentration. The atomized chemical reactants passing through an inductively coupled plasma cool from ~5000 to 1000 K within milliseconds and form nanoparticles inside a flow reactor. The ex situ analysis of particulates by transmission electron microscopy revealed 2–10 nm crystallites of fcc-UO 2 or α-UO 3 depending on the amount of oxygen in the system. α-UO 3 is the least thermodynamically preferred polymorph of UO 3 . The absence of stable uranium oxides with intermediate stoichiometries (e.g., U 3 O 8 ) and sensitivity of the uranium oxidation states to local redox conditions highlight the importance of in situ measurements at high temperatures. Therefore, we developed a laser-based diagnostic to detect uranium oxide particles as they are formed inside the flow reactor. Our in situ measurements allowed us to quantify the changes in the number densities of the uranium oxide nanoparticles (e.g., UO 3 ) as a function of oxygen gas concentration. Our results indicate that uranium can prefer to be in metastable crystal forms (i.e., α-UO 3 ) that have higher vapor pressures than the refractory form (i.e., UO 2 ) depending on the oxygen abundance in the surrounding environment. This demonstrates that the equilibrium processes may not dominate during rapid condensation processes, and thus kinetic models are required to fully describe uranium transport subsequent to nuclear incidents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗