Search NASA⌕ Search

Engineering topics

Cummings, J. R.

Publications and source records attributed to Cummings, J. R..

25 records · Page 2

Observations of the remnants of the ultrarelativistic electrons injected by the strong SSC of 24 March 1991

Data from the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) spacecraft has shown the presence near L = 1.9 of the remnants of the ultrarelativistic electrons (above 15 MeV) injected into the magnetosphere on 24 March 1991. The decay of the electrons has been tracked since July 1992. The electron e-folding lifetime is in the range of six to twelve months, and the location in L of the peak intensity moved inward by approximately 0.05 units in one year. The inferred electron lifetime is similar to that of approximately 0.5 MeV electrons, which is in agreement with extrapolation to higher energies of the theoretical estimates of Lyons and Thorne (1972).

Looper, M. D.↗

Relativistic electron acceleration and decay time scales in the inner and outer radiation belts: SAMPEX

High-energy electrons have been measured systematically in a low-altitude (520 x 675 km), nearly polar (inclination = 82 deg) orbit by sensitive instruments onboard the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX). Count rate channels with electron energy thresholds ranging from 0.4 MeV to 3.5 MeV in three different instruments have been used to examine relativistic electron variations as a function of L-shell parameter and time. A long run of essentially continuous data (July 1992 - July 1993) shows substantial acceleration of energetic electrons throughout much of the magnetosphere on rapid time scales. This acceleration appears to be due to solar wind velocity enhancements and is surprisingly large in that the radiation belt 'slot' region often is filled temporarily and electron fluxes are strongly enhanced even at very low L-values (L aprroximately 2). A superposed epoch analysis shows that electron fluxes rise rapidly for 2.5 is approximately less than L is approximately less than 5. These increases occur on a time scale of order 1-2 days and are most abrupt for L-values near 3. The temporal decay rate of the fluxes is dependent on energy and L-value and may be described by J = Ke-t/to with t(sub o) approximately equals 5-10 days. Thus, these results suggest that the Earth's magnetosphere is a cosmic electron accelerator of substantial strength and efficiency.

Baker, D. N.↗

The return of the anomalous cosmic rays to 1 Au in 1992

New observations of low energy (approximately 1 to 200 MeV/nuc) cosmic rays measured by three newly launched experiments on Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX) during 1992 and 1993 show the strong presence of anomalous cosmic ray (ACR) nitrogen and oxygen, well before the approaching solar minimum. When compared with ACR temporal variations over the past two solar cycles we find that the 1992-1993 fluxes are approximately 5 to 10 times their level at corresponding neutron monitor counting rates in 1969-1970 and 1985.

Mewaldt, R. A.↗

New evidence for geomagnetically trapped anomalous cosmic rays

We report new observations of 15 MeV/nuc or greater trapped heavy ions with Z equal to or greater than 2, made on the polar-orbiting SAMPEX spacecraft in late 1992 and early 1993. A trapped population that includes He, N, O, and Ne is found to be located at L = 2. We conclude that the observed N, O, and Ne ions are 'anomalous' cosmic rays, trapped by the mechanism proposed by Blake and Friesen (1977). While it is not expected that this mechanism would also trap anomalous He, the characteristics of the trapped He population are generally consistent with those of N, O, and Ne.

Cummings, J. R.↗

Direct glass bonded high specific power silicon solar cells for space applications

A lightweight, radiation hard, high performance, ultra-thin silicon solar cell is described that incorporates light trapping and a cover glass as an integral part of the device. The manufacturing feasibility of high specific power, radiation insensitive, thin silicon solar cells was demonstrated experimentally and with a model. Ultra-thin, light trapping structures were fabricated and the light trapping demonstrated experimentally. The design uses a micro-machined, grooved back surface to increase the optical path length by a factor of 20. This silicon solar cell will be highly tolerant to radiation because the base width is less than 25 microns making it insensitive to reduction in minority carrier lifetime. Since the silicon is bonded without silicone adhesives, this solar cell will also be insensitive to UV degradation. These solar cells are designed as a form, fit, and function replacement for existing state of the art silicon solar cells with the effect of simultaneously increasing specific power, power/area, and power supply life. Using a 3-mil thick cover glass and a 0.3 g/sq cm supporting Al honeycomb, a specific power for the solar cell plus cover glass and honeycomb of 80.2 W/Kg is projected. The development of this technology can result in a revolutionary improvement in high survivability silicon solar cell products for space with the potential to displace all existing solar cell technologies for single junction space applications.

Dinetta, L. C.↗

AlGaAs top solar cell for mechanical attachment in a multi-junction tandem concentrator solar cell stack

Free-standing, transparent, tunable bandgap AlxGa1-xAs top solar cells have been fabricated for mechanical attachment in a four terminal tandem stack solar cell. Evaluation of the device results has demonstrated 1.80 eV top solar cells with efficiencies of 18 percent (100 X, and AM0) which would yield stack efficiencies of 31 percent (100 X, AM0) with a silicon bottom cell. When fully developed, the AlxGa1-xAs/Si mechanically-stacked two-junction solar cell concentrator system can provide efficiencies of 36 percent (AM0, 100 X). AlxGa1-xAs top solar cells with bandgaps from 1.66 eV to 2.08 eV have been fabricated. Liquid phase epitaxy (LPE) growth techniques have been used and LPE has been found to yield superior AlxGa1-xAs material when compared to molecular beam epitaxy and metal-organic chemical vapor deposition. It is projected that stack assembly technology will be readily applicable to any mechanically stacked multijunction (MSMJ) system. Development of a wide bandgap top solar cell is the only feasible method for obtaining stack efficiencies greater than 40 percent at AM0. System efficiencies of greater than 40 percent can be realized when the AlGaAs top solar cell is used in a three solar cell mechanical stack.

Dinetta, L. C.↗