Search NASASearch

Engineering topics

Curlander, John C.

Publications and source records attributed to Curlander, John C..

At least 19 records

Pipeline synthetic aperture radar data compression utilizing systolic binary tree-searched architecture for vector quantization

A system for data compression utilizing systolic array architecture for Vector Quantization (VQ) is disclosed for both full-searched and tree-searched. For a tree-searched VQ, the special case of a Binary Tree-Search VQ (BTSVQ) is disclosed with identical Processing Elements (PE) in the array for both a Raw-Codebook VQ (RCVQ) and a Difference-Codebook VQ (DCVQ) algorithm. A fault tolerant system is disclosed which allows a PE that has developed a fault to be bypassed in the array and replaced by a spare at the end of the array, with codebook memory assignment shifted one PE past the faulty PE of the array.

Chang, Chi-Yung

SAR Processing Based On Two-Dimensional Transfer Function

Exact transfer function, ETF, is two-dimensional transfer function that constitutes basis of improved frequency-domain-convolution algorithm for processing synthetic-aperture-radar, SAR data. ETF incorporates terms that account for Doppler effect of motion of radar relative to scanned ground area and for antenna squint angle. Algorithm based on ETF outperforms others.

Chang, Chi-Yung

Steering A Radar Beam Toward The Zero-Doppler Line

Algorithm computes angles needed to aim radar beam from airborne or spaceborne platform toward Doppler line projected on ground for which Doppler shift of radar return is zero. Devised to reduce Doppler errors and simplify processing of data from synthetic-aperture-radar system. Applicable to aiming of other radio or optical instruments toward their zero-Doppler lines on ground.

Chang, Chi-Yung

Automated Registration Of Images From Multiple Sensors

Images of terrain scanned in common by multiple Earth-orbiting remote sensors registered automatically with each other and, where possible, on geographic coordinate grid. Simulated image of terrain viewed by sensor computed from ancillary data, viewing geometry, and mathematical model of physics of imaging. In proposed registration algorithm, simulated and actual sensor images matched by area-correlation technique.

Rignot, Eric J. M.

International collaboration in SAR ground data systems

A set of considerations that are pertinent to future international cooperation in the area of synthetic aperture radar (SAR) ground data systems are presented. The considerations are as follows: (1) success of future spaceborne SAR missions will require multi-agency and/or multi-national collaboration; (2) ground processing is typically performed by each agency for their user base; (3) international standards are required to achieve a uniform data product independent of the processing center; (4) to reduce the aggregate cost of the ground data systems, collaboration is required in design and development; (5) effective utilization of the data by an international user community; (6) commercialization of data products; and (7) security of data systems.

Curlander, John C.

Fast Vector-Quantizing Data Compressor

Proposed encoding digital electronic data-processing system compresses 7-Mb/s input stream of data into 1-Mb/s output stream. Intended to reduce flow of data from orbiting synthetic-aperture-radar (SAR) system to rate low enough for transmission to ground. Features include reliability, light weight, and low power. Proves advantageous in such terrestrial applications as compression of speech and of video signals.

Chang, Chi-Yung

Multi-frequency multi-polarization processing for spaceborne SAR

The Shuttle Imaging Radar-C (SIR-C) is the third in a series of space shuttle based synthetic aperture radars (SAR) sponsored by the National Aeronautics and Space Administration (NASA). The SIR-C ground data processing system is to process the playbacked SAR signal data into a variety of data products for distribution to the science community. An overview of the end-to-end ground data processing system with emphasis on the unique characteristics involved in the system design is presented. Included in the discussion are science requirements, radar system specifications, input data format specifications, system operations design, data products design, processing algorithm design, hardware architecture design, and software design.

Curlander, John C.

Improvements In Processing And Aiming For Squint-Mode SAR

Improved technique for aiming antenna of synthetic-aperture radar (SAR) operating in squint imaging mode (SIM) complements improved algorithm for processing raw SIM SAR data. Developed to reduce deleterious effects of two unique characteristics of SIM SAR: large range walk and large variation of Doppler centroid as function of range.

Chang, Chi Y.

Techniques in processing multi-frequency multi-polarization spaceborne SAR data

This paper presents the algorithm design of the SIR-C ground data processor, with emphasis on the unique elements involved in the production of registered multifrequency polarimetric data products. A quick-look processing algorithm used for generation of low-resolution browse image products and estimation of echo signal parameters is also presented. Specifically the discussion covers: (1) azimuth reference function generation to produce registered polarimetric imagery; (2) geometric rectification to accommondate cross-track and along-track Doppler drifts; (3) multilook filtering designed to generate output imagery with a uniform resolution; and (4) efficient coding to compress the polarimetric image data for distribution.

Curlander, John C.

Ambiguity Of Doppler Centroid In Synthetic-Aperture Radar

Paper discusses performances of two algorithms for resolution of ambiguity in estimated Doppler centroid frequency of echoes in synthetic-aperture radar. One based on range-cross-correlation technique, other based on multiple-pulse-repetition-frequency technique.

Chang, Chi-Yung

SAR data compression: Application, requirements, and designs

The feasibility of reducing data volume and data rate is evaluated for the Earth Observing System (EOS) Synthetic Aperture Radar (SAR). All elements of data stream from the sensor downlink data stream to electronic delivery of browse data products are explored. The factors influencing design of a data compression system are analyzed, including the signal data characteristics, the image quality requirements, and the throughput requirements. The conclusion is that little or no reduction can be achieved in the raw signal data using traditional data compression techniques (e.g., vector quantization, adaptive discrete cosine transform) due to the induced phase errors in the output image. However, after image formation, a number of techniques are effective for data compression.

Curlander, John C.

Phi-s correlation and dynamic time warping - Two methods for tracking ice floes in SAR images

The authors present two algorithms for performing shape matching on ice floe boundaries in SAR (synthetic aperture radar) images. These algorithms quickly produce a set of ice motion and rotation vectors that can be used to guide a pixel value correlator. The algorithms match a shape descriptor known as the Phi-s curve. The first algorithm uses normalized correlation to match the Phi-s curves, while the second uses dynamic programming to compute an elastic match that better accommodates ice floe deformation. Some empirical data on the performance of the algorithms on Seasat SAR images are presented.

Mcconnell, Ross

Improved Radiometric Correction For SAR Images

Correction algorithm reversible and applicable to both detected and complex images. Method described accounts for major effects of transmitter, antenna, receiver, and certain aspects of SAR signal processing upon calibration and provides for appropriate reversible corrections applied in processing. Applicable to both detected (amplitude-only) and complex (amplitude and phase) SAR image data and provides for optional subtraction of estimated noise floor from image.

Freeman, Anthony

Earth observing SAR data processing systems at the Jet Propulsion Laboratory - Seasat to EOS SAR

The evolution of SAR digital data processing and management ground systems developed at the JPL for earth science missions is discussed. Attention is given to the SAR ground data system requirements, the early data processing systems, the Seasat SAR system, and the SIR-B data processing system. Special consideration is given to two currently operational SAR data systems: the JPL aircraft SAR processing system that flies on the NASA DC-8 and the Alaska SAR Facility at Fairbanks.

Nichols, David A.

Automated multisensor registration - Requirements and techniques

The synergistic utilization of data from a suite of remote sensors requires multi-dimensional analysis of the data. Prior to this analysis, processing is required to correct for the systematic geometric distortions characteristic of each sensor, followed by a registration operation to remove any residual offsets. Furthermore, to handle a large volume of data and high data rates, the registration process must be fully automated. A conceptual approach is presented that integrates a variety of registration techniques and selects the candidate algorithm based on certain performance criteria. The performance requirements for an operational algorithm are formulated given the spatially, temporally, and spectrally varying factors that influence the image characteristics and the science requirements of various applications. Several computational techniques are tested and their performance evaluated using a multisensor test data set assembled from the Landsat TM, Seasat, SIR-B, TIMS, and SPOT sensors. The results are discussed and recommendations for future studies are given.

Rignot, Eric J. M.

Towards operational multisensor registration

To use data from a number of different remote sensors in a synergistic manner, a multidimensional analysis of the data is necessary. However, prior to this analysis, processing to correct for the systematic geometric distortion characteristic of each sensor is required. Furthermore, the registration process must be fully automated to handle a large volume of data and high data rates. A conceptual approach towards an operational multisensor registration algorithm is presented. The performance requirements of the algorithm are first formulated given the spatially, temporally, and spectrally varying factors that influence the image characteristics and the science requirements of various applications. Several registration techniques that fit within the structure of this algorithm are also presented. Their performance was evaluated using a multisensor test data set assembled from LANDSAT TM, SEASAT, SIR-B, Thermal Infrared Multispectral Scanner (TIMS), and SPOT sensors.

Rignot, Eric J. M.

Making Mosaics Of SAR Imagery

Spaceborne synthetic-aperture-radar (SAR) images useful for mapping of planets and investigations in Earth sciences. Produces multiframe mosaic by combining images along ground track, in adjacent cross-track swaths, or in ascending and descending passes. Images registered with geocoded maps such as ones produced by MAPJTC (NPO-17718), required as input. Minimal intervention by operator required. MOSK implemented on DEC VAX 11/785 computer running VMS 4.5. Most subroutines in FORTRAN, but three in MAXL and one in APAL.

Curlander, John C.