Engineering topics

Custelcean, Radu

Publications and source records attributed to Custelcean, Radu.

At least 37 records · Page 2

DOE OSTI2022

Ultra-fast microwave regeneration of CO 2 solid sorbents for energy-efficient direct air capture

Large-scale deployment of direct air capture (DAC) technologies has become critical for mitigating climate change. Towards this end, energy-efficient regeneration of the sorbents used in the process of carbon capture from air is very important to significantly reduce the high operational cost of DAC. Guanidine compounds can be used with environmentally friendly aqueous amino acids (e.g., potassium sarcosinate) for fast and effective CO 2 capture from air, and have a strong potential for low-energy CO 2 release and sorbent regeneration. In this process, the amino acid absorbs the CO 2 from the air, and the guanidine compounds react with the CO 2 -rich amino acid solution and crystallize as an insoluble carbonate salt. Separation and thermal regeneration of the precipitated guanidine carbonate salt leads to an overall low-temperature and low-energy direct air capture process. Effective CO 2 release from the solid guanidine compound can be achieved by mild heating at 120 °C. Here, in this study, to overcome the relatively inefficient traditional conductive heating of the crystalline solid (i.e., Methylglyoxal-bis(iminoguanidine) carbonate, MGBIG carbonate), we evaluated the feasibility of microwave heating of MGBIG carbonate in terms of power requirement, radiation time, and solids mass for efficient CO 2 desorption. The energy consumption needed by a microwave oven and a conventional oven to regenerate the same mass of the sorbent was directly measured to compare the total energy required per unit mass of regenerated sample and provide an understanding of the potential benefits of microwave regeneration. We found that microwave heating effectively regenerates MGBIG carbonate, which may be facilitated by the water molecules that are co-crystallized with carbonate in the guanidine crystals. Microwave heating at 2.54 GHz with 1250 W is up to 17 times faster than conventional conductive heating at 160 °C, resulting in 40 % electrical energy reduction. These results indicate that microwave regeneration may be an energy-efficient method for fast regeneration of solid sorbents used for direct air capture.

42 ENGINEERING↗

DOE OSTI2022

Anti-electrostatic hydrogen-bonded tellurate dimers captured and stabilized by crystallization of a bis-iminoguanidinium salt

Anionic Te 2 O 6 (OH) 4 4– dimers have been captured by crystallization of a hydrated salt of glyoxal-bis-iminoguanidinium (GBIG), and structurally characterized by single-crystal X-ray diffraction and vibrational spectroscopy. The crystal structure reveals anti-electrostatic hydrogen-bonded chains of Te 2 O 6 (OH) 4 4– dimers, consisting of edge-sharing TeO 6 octahedra, stabilized by hydrogen bonding from the GBIG cations and the water molecules included in the crystal. FTIR spectroscopy confirms the presence of TeO 6 octahedra with characteristic Te–O stretching modes at 755 cm -1 and 689 cm -1 , while the observed stretching mode at 3459 cm-1 confirms the presence of axially-bonded hydroxyl groups. Raman spectroscopy and DFT calculations confirm the presence of the Te 2 O 6 (OH) 4 4– dimers in the crystalline phase and of the TeO(OH) 5 – monomers in solution.

36 MATERIALS SCIENCE↗

DOE OSTI2022

The status and prospects of materials for carbon capture technologies

In order to combat climate change, carbon dioxide (CO 2 ) emissions from industry, transportation, buildings, and other sources need to be captured and long-term stored. Decarbonization of these sources requires special types of materials that have high affinities for CO 2 . Potassium hydroxide is a benchmark aqueous sorbent that reacts with CO 2 to convert it into K 2 CO 3 and subsequently precipitated as CaCO 3 . Another class of carbon capture materials is solid sorbents that are usually functionalized with amines or have natural affinities for CO 2 . The next wave of materials for carbon capture under investigation includes activated carbon, metal–organic frameworks, zeolites, carbon nanotubes, and ionic liquids. In this issue of MRS Bulletin, some of these materials are highlighted, including solvents and sorbents, membranes, ionic liquids, and hydrides. Other materials that can capture CO2 from low concentrations of gas streams, such as air (direct air capture) are also discussed. Also covered in this issue are machine learning-based computer algorithms developed with the goal to speed up the progress of carbon capture materials development, and to design advanced materials with high CO 2 capacity, improved capture and release kinetics, and improved cyclic durability.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Direct Air Capture of CO 2 Using Solvents

Large-scale deployment of negative emissions technologies (NETs) that permanently remove CO 2 from the atmosphere is now considered essential for limiting the global temperature increase to less than 2°C by the end of this century. One promising NET is direct air capture (DAC), a technology that employs engineered chemical processes to remove atmospheric carbon dioxide, potentially at the scale of billions of metric tons per year. This review highlights one of the two main approaches to DAC based on aqueous solvents. The discussion focuses on different aspects of DAC with solvents, starting with the fundamental chemistry that includes the chemical species and reactions involved and the thermodynamics and kinetics of CO 2 binding and release. Chemical engineering aspects are also discussed, including air–liquid contactor design, process development, and technoeconomic assessments to estimate the cost of the DAC technologies. Various solvents employed in DAC are reviewed, from aqueous alkaline solutions (NaOH, KOH) to aqueous amines, amino acids, and peptides, along with different solvent regeneration methods, from the traditional thermal swinging to the more exploratory carbonate crystallization with guanidines or electrochemical methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

A Photoresponsive Receptor with a 10 5 Magnitude of Reversible Anion-Binding Switching

In a leap toward anion separation that uses only energy input for binding and release cycles, we report herein a new class of photoswitchable anion receptors featuring a diiminoguanidinium functionality that displays a change of more than five orders of magnitude in switched-off binding strength towards sulfate, a representative oxyanion, upon photoirradiation with UV light. Additionally, the (E,E)-2-pyridyl-diiminoguanidinium cation, synthesized as the triflate salt, binds sulfate with extraordinary strength in [D6]DMSO owing to its bidentate guanidinium hydrogen bonding, which can chelate the O-S-O edge of sulfate. Upon photoisomerization to the Z,Z isomer, the anion-binding site is essentially shut off by intramolecular hydrogen bonds to the 2-pyridyl substituents, as shown by anion-binding titrations, theoretical calculations, and X-ray structural analysis. This approach will allow the development of advanced anion-separation cycles that use only energy input and generate no chemical waste, and thus address challenging chemical separation problems in a more sustainable way.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Synergistic direct air capture of CO 2 with aqueous guanidine/amino acid solvents

We report that Methylglyoxal-bis(iminoguanidine) (MGBIG) has been recently identified as a promising sorbent for direct air capture (DAC) of carbon dioxide via crystallization of guanidinium carbonate salts. In this study, the effects of aqueous amino acids and oligopeptides, such as glycine, sarcosine, serine, arginine, taurine, lysine, and glycylglycine, on the efficacy of DAC by crystallization of MGBIG carbonate have been investigated. While most of the amino acids studied were found to precipitate with MGBIG, thereby rendering the sorbent unavailable for DAC, sarcosine, the only amino acid in the series with a secondary amine group, remained soluble in the presence of MGBIG, leading to enhanced DAC compared to MGBIG alone. Specifically, for the same amount of MGBIG (5 mmol), the addition of a small amount of sarcosine to the aqueous solvent–as little as 0.5 mmol–led to extraction of six times as much CO 2 from the air (4.15 mmol vs. 0.7 mmol). Thus, aqueous MGBIG and sarcosine work in synergy, offering the prospect for an effective DAC process.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Direct air capture with bis-iminoguanidines: From discovery to commercialization

Here, research on direct air capture (DAC) of CO 2 at Oak Ridge National Laboratory (ORNL) over the past five years is highlighted, starting with the initial discovery, continuing with fundamental and applied research, and concluding with commercialization by teaming up with industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Direct air capture of CO 2 via crystal engineering

A perspective view of direct air capture (DAC) of CO 2 and its role in mitigating climate change is presented. The article focuses on a promising approach to DAC involving crystal engineering of metal–organic and hydrogen-bonded frameworks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Carbon dioxide capture with aqueous amino acids: Mechanistic study of amino acid regeneration by guanidine crystallization and process intensification

CO 2 capture from powerplant-generated flue gas via a phase-changing process involving absorption with aqueous amino acids (e.g., glycine or sarcosine) and bicarbonate crystallization with bis-iminoguanidines (e.g., glyoxal-bis-iminoguanidine or GBIG) is investigated in this paper. This process is of high interest due to its potential to decrease the energy penalty for CO 2 capture by significantly reducing the solvent regeneration energy typically associated with aqueous amine solvents. A critical step in the proposed CO 2 capture mechanism is the regeneration of the amino acid by removal of protons and bicarbonate ions from solution through crystallization of GBIGH 2 2+ bicarbonate salt. Here, we investigated the thermodynamics and kinetics of glycine regeneration by crystallization of GBIGH 2 2+ (HCO 3 – ) 2 (H 2 O) 2 . A theoretical model was developed and compared to experimental data to simulate and predict the glycine regeneration and determine its reaction mechanism. This combined experimental and theoretical study led to the conclusion that, while the GBIGH 2 2+ bicarbonate crystallization step provides most of the thermodynamic driving force for the glycine regeneration, the rate-limiting step is the protonation of GBIG prior to crystallization. The CO 2 loading and amino acid regeneration steps were combined into a single, intensified process using a bubble column reactor. The CO 2 loading capacity of GBIG was experimentally determined to be roughly 1.36 mol CO 2 per mol GBIG. These results provide the fundamental basis for developing an effective carbon capture technology with phase-changing amino acid/guanidine absorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

A Process Intensification Approach for CO 2 Absorption Using Amino Acid Solutions and a Guanidine Compound

Environmentally friendly amino-acid salt solutions are used for the absorption of carbon dioxide from concentrated flue-gas streams via chemical absorption. Process intensification reduces operating and capital costs by combining chemical reactions and separation operations. Here, we present a new process-intensification approach that combines the CO 2 capture and the amino-acid regeneration steps into a single process carried out in a slurry three-phase reactor. The absorbed CO 2 precipitates as a solid carbonated guanidine compound. The cycle is completed by separation of the solid precipitate to strip the CO 2 and regenerate the guanidine compound, while the liquid solution is recycled to the slurry reactor. The process was studied by modifying a model developed by the authors for a gas-liquid bubble column without the presence of the guanidine compound. The guanidine precipitation reaction was accounted for using kinetic parameters calculated by the authors in another study. The proposed model was implemented by modifying an existing computer code used for the simulation of gas-liquid bubble columns. The calculated results showed that the proposed cycle can significantly reduce energy, equipment, and operating costs and can make an important contribution to developing a competitive cost-effective large-scale process for CO 2 capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Lipophilic guanidinium compounds for removal of oxyanions from aqueous solutions

Methods for removing an oxyanion from an aqueous source containing said oxyanion, comprising contacting said aqueous source with an aqueous-insoluble hydrophobic solution containing an oxyanion extractant compound dissolved in an aqueous-insoluble hydrophobic solvent to result in formation of an oxyanion salt of said extractant compound and extraction of said oxyanion salt into said aqueous-insoluble hydrophobic solution, wherein said extraction results in an extraction affinity (D) of said oxyanion of at least 1, wherein D is the concentration ratio of said oxyanion in the organic phase divided by the concentration of said oxyanion in the aqueous phase; wherein said extractant compound has the following composition: wherein at least one of R1-R10 is or contains a hydrocarbon (R) group containing at least 4, 5, 6, 7, 8, 9, 10, 11, or 12 carbon atoms.

Williams, Neil John↗

DOE OSTI2021

Reducing Atmospheric Carbon Dioxide Through Direct Air Capture

Climate change is mostly the result of elevated carbon dioxide emissions. Over the past two decades, research groups have been searching for new technologies that capture carbon dioxide from the atmosphere as an effective way of reversing climate change. Dr Radu Custelcean and his colleagues at the Oak Ridge National Laboratory in the US specialise in this endeavour. The team is developing novel materials and methods that filter carbon dioxide out of the air in an energy-efficient manner.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Hybrid Absorption–Crystallization Strategies for the Direct Air Capture of CO2 Using Phase-Changing Guanidium Bases: Insights from in Operando X-ray Scattering and Infrared Spectroscopy Measurements

Efforts to limit rising concentrations of CO 2 have motivated the development of negative emission technologies. Direct air capture (DAC) of CO 2 is one of the negative emissions technologies that has been proposed for the direct removal of CO 2 from the atmosphere. Phase-changing bis(iminonoguanidine) (BIG) sorbents have been developed for the direct air capture of CO 2 . These phase changing sorbents, specifically glyoxal-bis(iminoguanidine) (GBIG), involve (1) CO 2 absorption with aqueous amino acid salts, such as K- or Na-glycinate to yield bicarbonate-rich solutions, (2) crystallization of the bicarbonate anions with a BIG solid, which regenerates the amino acid, and (3) solid-state CO 2 release from the carbonate crystals and BIG regeneration. Despite the promising potential of these materials, their structural evolution during the thermal regeneration of the BIG solids, chemical regeneration of the sodium or potassium glycinate solvents, and the crystallization behavior of CO 2 -loaded BIG bicarbonate remain to be evaluated and understood in detail. The aim of this study is to probe these knowledge gaps. In situ wide-angle X-ray Scattering (WAXS) results show that CO 2 and water molecules in GBIG bicarbonate are simultaneously released in a single step during the thermal regeneration of the sorbent at 97 – 134 °C. In situ ATR-FTIR measurements showed that sodium glycinate and GBIG bicarbonate are simultaneously generated when GBIG, glycine, and sodium bicarbonate are reacted. The crystallization of GBIG bicarbonate from GBIG and CO 2 -loaded monoethanolamine (MEA) occurs rapidly in the first 10 min of the reaction, as determined using in situ GI-SAXS measurements. Overall, the insights from these studies are essential for the scalable implementation of CO 2 capture technologies using these phase-changing sorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Evidence of Ba-substitution induced spin-canting in the magnetic Weyl semimetal EuCd 2 As 2

Recently EuCd 2 As 2 was predicted to be a magnetic Weyl semimetal with a lone pair of Weyl nodes generated by A-type antiferromagnetism and protected by a rotational symmetry. However, it was soon discovered that the actual magnetic structure broke the rotational symmetry and internal pressure was later suggested as a route to stabilize the desired magnetic state. In this work we test this prediction by synthesizing a series of Eu 1-x BaxCd 2 As 2 single crystals and studying their structural, magnetic, and transport properties via both experimental techniques and first-principles calculations. We find that small concentrations of Ba (~3%–10%) lead to a small out-of-plane canting of the Eu moment. However, for higher concentrations this effect is suppressed and a nearly in-plane model is recovered. Studying the transport properties we find that all compositions show evidence of an anomalous Hall effect dominated by the intrinsic mechanism as well as large negative magnetoresistances in the longitudinal channel. A nonmonotonic evolution of the transport properties is seen across the series which correlates to the proposed canting suggesting canting may enhance the topological effects. Careful density functional theory calculations using an all-electron approach revise prior predictions finding a purely ferromagnetic ground state with in-plane moments for both the EuCd 2 As 2 and Eu 0.5 Ba 0.5 Cd 2 As 2 compounds, corroborating our experimental findings. This work suggests that Ba substitution can tune the magnetic properties in unexpected ways which correlate to changes in measures of topological properties, encouraging future work to locate the ideal Ba concentration for Eu moment canting.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

Synergistic Self-Assembly of Oxoanions and d-Block Metal Ions with Heteroditopic Receptors into Triple-Stranded Helicates

Cooperativity effects among the interconnected anion and cation binding sites can profoundly alter the performance of heteroditopic receptors in selective ion pair recognition, processes that are oftentimes pertinent to biological systems and chemical separations. In this paper, we report the effect of the linker that connects both binding sites on self-assembly of heteroditopic receptors in the presence of divalent first-row transition metal salts in solution and solid phase. Introduction of backbone flexibility in the receptor results in the formation of triple-stranded ion-pair helicates with an extraordinary selectivity towards CuSO 4 through an anion-induced fit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Iminoguanidines: from anion recognition and separation to carbon capture

Iminoguanidines, first reported in 1898, have received renewed attention in the last 5 years due to their ability to recognize and separate anions from competitive aqueous environments. Iminoguanidines display high recognition abilities towards hydrophilic oxyanions (e.g., sulfate, chromate, carbonate) through strong and complementary hydrogen bonding from the guanidinium groups. Here, this feature article reviews the fundamental anion recognition chemistry of iminoguanidines, as well as real-world applications including sulfate removal from seawater and CO 2 capture for climate change mitigations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Dialing in Direct Air Capture of CO 2 by Crystal Engineering of Bis-iminoguanidines

Direct air capture (DAC) technologies that extract carbon dioxide from the atmosphere via chemical processes have the potential to restore the atmospheric CO 2 concentration to an optimal level. This study elucidates structure-property relationships in DAC by crystallization of bis-iminoguanidine (BIG) carbonate salts. Here, their crystal structures are analyzed by X-ray and neutron diffraction to accurately measure key structural parameters including molecular conformations, hydrogen bonding, and π-stacking. Experimental measurements of key properties, such as aqueous solubilities and regeneration energies and temperatures, are complemented by first-principles calculations of lattice and hydration free energies, as well as free energies of reactions with CO 2 , and BIG regenerations. Minor structural modifications in the molecular structure of the BIGs are found to result in major changes in the crystal structures and the aqueous solubilities within the series, leading to enhanced DAC.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Guanidine compounds for removal of oxyanions from aqueous solutions and for carbon dioxide capture

Methods for removing oxyanions from water according to the following steps: (i) dissolving an oxyanion precipitating compound into the aqueous source to result in precipitation of an oxyanion salt of the oxyanion precipitating compound; and (ii) removing the oxyanion salt from the water containing the oxyanion to result in water substantially reduced in concentration of the oxyanion; wherein the oxyanion precipitating compound has the following composition: wherein A is a ring-containing moiety and Xm− is an anionic species with a magnitude of charge m. The invention employs bis-iminoguanidinium compounds according to Formula (1a) as well as neutral precursor compounds according to Formula (1), which can be used for removing undesirable species from aqueous solutions or air, such as removal of sulfate from water and carbon dioxide from air.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗