D Kim | Search NASA

NASA NTRS2023

Exploration Extra-Vehicular Mobility Unit (xEMU) Composite Hard Upper Torso (CHUT) Development

The xEMU is the Exploration Mobility Unity or space suit designed for microgravity (cislunar and low earth orbit (LEO)) and lunar surface operations. This suit design allows crewmembers to perform extravehicular exploration, science, construction, maintenance, and contingency operations while unattached to a vehicle for life support in pressure and thermal environments that exceed human capability. The xEMU provides life support, environmental protection, and communications capabilities to the EVA crewmember while allowing sufficient mobility and visibility to perform dexterous EVA tasks. The effort documented in this paper, addressed the design, analysis, manufacturing, full-scale test article testing and validation for a Composite Hard Upper Torso(CHUT)unit. Design and analysis of the CHUT was based on measured B-basis properties of the selected S-glass/epoxy composite, and established final geometry, composite layup and interface details that met requirements. A complete manufacturing and assembly protocol was established for the CHUT starting from composite layup in the tool, to final assembly of all interface metal hardware prior to delivery to NASA for suit integration. Full-scale CHUT test articles underwent static and fatigue pressure testing (2 lifetimes), impact testing at critical stress locations for tool drop/microgravity scenarios, followed by post-impact fatigue testing. Effect of manufacturing defects was evaluated by manufacturing a full-scale CHUT with 0.375”/0.5” defects at critical stress locations, followed by static and life-cycle fatigue testing. In all cases, the CHUT design met or exceeded mass, structural, interface and functional requirements. Two (2) complete CHUT articles were delivered to NASA for full-scale suit integration and testing.

spacesuit↗

NASA NTRS2023

Composite Hard Upper Torso (CHUT) for xEMU Space Suit

The xEMU is the Exploration Mobility Unity or space suit designed for microgravity (cislunar and low earth orbit (LEO)) and lunar surface operations. This suit design allows crewmembers to perform extravehicular exploration, science, construction, maintenance, and contingency operations while unattached to a vehicle for life support in pressure and thermal environments that exceed human capability. The xEMU provides life support, environmental protection, and communications capabilities to the EVA crewmember while allowing sufficient mobility and visibility to perform dexterous EVA tasks. The effort documented in this paper, addressed the design, analysis, manufacturing, full-scale test article testing and validation for a Composite Hard Upper Torso(CHUT)unit. Design and analysis of the CHUT was based on measured B-basis properties of the selected S-glass/epoxy composite, and established final geometry, composite layup and interface details that met requirements. A complete manufacturing and assembly protocol was established for the CHUT starting from composite layup in the tool, to final assembly of all interface metal hardware prior to delivery to NASA for suit integration. Full-scale CHUT test articles underwent static and fatigue pressure testing (2 lifetimes), impact testing at critical stress locations for tool drop/microgravity scenarios, followed by post-impact fatigue testing. Effect of manufacturing defects was evaluated by manufacturing a full-scale CHUT with 0.375”/0.5” defects at critical stress locations, followed by static and life-cycle fatigue testing. In all cases, the CHUT design met or exceeded mass, structural, interface and functional requirements. Two (2) complete CHUT articles were delivered to NASA for full-scale suit integration and testing.

spacesuit↗

NASA NTRSDate not supplied

On Improving the Dust Lidar Ratios for Version 5 of CALIOP by Using Measurements with Source-tagged Model Results

Vertically resolved retrievals of aerosol backscatter and extinction have been available since 2006 from global measurements acquired by the space borne lidar CALIOP onboard the CALIPSO satellite. These retrievals depend crucially upon the ratio of extinction to backscatter (i.e., lidar ratio) which typically has to be assumed for the various aerosol species for an elastic backscatter lidar like CALIOP. For all CALIPSO data releases up until now (version 4.2), these lidar ratios have been taken as constant both spatially and temporally. However, it is well established that the aerosol lidar ratios can vary significantly regionally, seasonally, and also as a function of age and relative humidity. In particular, the dust lidar ratios show significant variation depending upon their source regions, which is related to the mineral composition of dust in that region. In this paper, we shall present a scheme to obtain the regionally and seasonally dependent lidar ratios of dust. In this scheme, which may be implemented in a forthcoming version of CALIOP aerosol extinction retrievals, we first derive lidar ratios of aerosol layers globally, classified as dust by CALIOP, by using the backscatter measurements constrained by collocated MODIS aerosol optical depths. Since this dust will frequently be a mixture of dust from various source regions, we obtain the corresponding regional contributions from the dust simulations using the GEOS model tagged to nine source regions. Finally, combining information from both measurements and models, we obtain the lidar ratios of dust corresponding to the nine source regions. The lidar ratio of the mixed dust anywhere can now be obtained from the tagged model fractions and the corresponding regional lidar ratio. We shall show the application of this scheme for various regions and seasons.

CALIPSO↗

NASA NTRSDate not supplied

Benchmarking GOCART-2G in the Goddard Earth Observing System (GEOS)

The Goddard Chemistry Aerosol Radiation and Transport (GOCART) model, which controls the sources sinks and chemistry within the Goddard Earth Observing System, recently underwent a major refactoring and update to the representation of physical processes. The code refactoring increases flexibility such multiple instances of an aerosol species can be run and interact with radiation and cloud microphysics, in addition to the output of multiple wavelength aerosol optical properties in support of data assimilation. From a science perspective, a new radiatively active tracer, brown carbon, was added to distinguish smoke from other sources of organic aerosol thereby improving optical properties entering the radiative calculations. A four-year benchmark simulation was evaluated using in situ and space borne measurements to develop a baseline and prioritize future development. A comparison of simulated aerosol optical depth between GOCART-2G and MODIS retrievals indicates the model captures the overall spatial pattern and seasonal cycle of aerosol optical depth but overestimates aerosol extinction over dusty regions and underestimates aerosol extinction over northern hemisphere boreal forests, requiring further tuning of emissions. This MODIS-based analysis is corroborated by comparisons to MISR and selected AERONET stations. Despite the underestimate of aerosol optical depth in biomass burning regions in GEOS, there is an overestimate in the surface mass of organic carbon in the United States, especially during the summer months.

Allison Collow↗