Search NASA⌕ Search

Engineering topics

Dadmun, Mark

Publications and source records attributed to Dadmun, Mark.

25 records · Page 2

Insights into the Morphology and Kinetics of Growth of Silver Metal–Organic Nanotubes

The kinetics of the formation of novel porous metal organic nanotubes, [Ag2(4,4 -(1,4-(xylene)diyl)bis- (1,2,4-triazole) (NO3)2] NMP, was investigated by means of ex-situ time-resolved small-angle X-ray scattering (SAXS) and scanning electron microscopy (SEM). The SAXS results were modeled using the Gualtieri model, which decouples the nucleation and growth processes giving additional insight into the crystal formation mechanism. The results show that the semirigid 4,4 -(1,4-(xylene)diyl)bis(1,2,4-triazole) ligand (L) binds with silver ions, adopting a seesaw geometry to form a polydisperse isotropic framework immediately after mixing the ligands and metal ions. In addition, the SEM imaging demonstrates that the microcrystals grow anisotropically, with nucleation along the edge of the 3D aggregate. These combined data demonstrate that the growth of this MONT occurs in two steps: a rapid formation of an isotropic porous structure immediately after mixing the reactant, which then develops anisotropically as the aggregates of nanorods grow in a preferred direction. The anisotropic growth of the crystal is autocatalytic and determined by the rate of nucleation of new growth sites on the crystals. Moreover, the results of this analysis elucidate, for the rst time, the exact order of the competing processes that occur in the synthesis of these MONTs, showing that their anisotropic growth occurs on the initial 3D aggregate and appears to be directed by the interplay between the surface energies that exist during the MONT formation process. This insight is crucial to the use of crystal engineering to guide the crystal formation processes in MONTs to targeted structures, properties, and applications.

36 MATERIALS SCIENCE↗

3D reconstruction of carbon nanotube networks from neutron scattering experiments

Structure reconstruction from statistical descriptors, such as scattering data obtained using x-rays or neutrons, is essential in understanding various properties of nanocomposites. Scattering based reconstruction can provide a realistic model, over various length scales, that can be used for numerical simulations. In this study, 3D reconstruction of a highly loaded carbon nanotube (CNT)-conducting polymer system based on small and ultra-small angle neutron scattering (SANS and USANS, respectively) data was performed. These light-weight and flexible materials have recently shown great promise for high-performance thermoelectric energy conversion, and their further improvement requires a thorough understanding of their structure-property relationships. The first step in achieving such understanding is to generate models that contain the hierarchy of CNT networks over nano and micron scales. The studied system is a single walled carbon nanotube (SWCNT)/poly (3,4-ethylenedioxythiophene): poly (styrene sulfonate) (PEDOT: PSS). SANS and USANS patterns of the different samples containing 10, 30, and 50 wt% SWCNTs were measured. These curves were then utilized to calculate statistical two-point correlation functions of the nanostructure. These functions along with the geometrical information extracted from SANS data and scanning electron microscopy images were used to reconstruct a representative volume element (RVE) nanostructure. Generated RVEs can be used for simulations of various mechanical and physical properties. This work, therefore, introduces a framework for the reconstruction of 3D RVEs of high volume faction nanocomposites containing high aspect ratio fillers from scattering experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

The impact of lignin source on its self-assembly in solution

Recently, there has been a growing interest in developing value added uses for lignin, including the utilization of lignins as a precursor for carbon materials. Proper understanding of the association behavior of lignins during solution processing provides important structural information that is needed to rationally optimize the use of lignins in industry in a range of value added applications. In this paper, we follow the assembly of lignin molecules from a variety of sources in dimethyl sulfoxide, a good solvent for lignins, using small angle neutron scattering. In order to mimic industrial processing conditions, concentrations of lignins were kept above the overlap concentration. At small length scales, short lignin segments with ~4–10 monolignol units associate to form rigid rod-like/cylindrical building blocks, where the number of repeat units in a cylindrical segment decreases with increasing lignin concentration. These cylindrical building blocks associate to form aggregates with low cross-linking densities and a random coil or network like structures from highly branched lignin structures. The degree of branching of the base lignin molecule, which varies with source, plays a crucial role in determining their association behavior. Finally, the overall sizes of the aggregates decrease with increasing concentration at low cross-linking densities, whereas the opposite trend is observed for highly branched lignins.

36 MATERIALS SCIENCE↗

Gas expanded polymer process to anneal nanoparticle dispersion in thin films

A spin-coating solution comprising poly(3-hexylthiophene) (P3HT) and phenyl-C61-butyric acid methyl ester (PCBM) nanoparticles used to create organic photovoltaic (OPV) active layers have been shown to adopt a non-uniform concentration profile across the thin film dimension. This inhomogeneous distribution can reduce the efficiency of the device. For our new process, gas expanded polymer (GXP) annealing, is applied to P3HT/PCBM thin film blends, enabling the distribution of the PCBM nanoparticles to be manipulated by varying the GXP processing conditions. Films of 50 nm thickness (nominally) created by spin casting a blend of P3HT mixed with PCBM were annealed by oscillatory GXP and GXP at constant pressure using high pressure CO 2 . An increase in P3HT crystallinity (detected by X-ray diffraction and UV-vis spectroscopy) along with a more uniform distribution of PCBM nanoparticles in the thickness dimension, as interpreted from neutron reflectivity measurements, were observed after oscillatory GXP annealing. In addition, static water contact angles suggest that the film/air interface is enriched in PCBM relative to the as-cast film. Finally, these results demonstrate that GXP annealing, which is commercially scalable, can be successfully used to create a uniform distribution of PCBM nanoparticles across the thickness dimension in a P3HT thin film.

36 MATERIALS SCIENCE↗

Monitoring the dynamics of miscible P3HT:PCBM blends: A quasi elastic neutron scattering study of organic photovoltaic active layers

Our work reports on the detailed molecular dynamic behavior of miscible blends of Poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) and their pure counterparts by quasi-elastic neutron scattering measurements (QENS). The study provides the measure of relaxation processes on pico-to-nanosecond time scales. A single relaxation process was observed in pure P3HT and PCBM while two relaxation processes, one fast and one slow, were observed in the blends. The fast process was attributed to the dynamics of P3HT while the slow process was correlated to the dynamics of PCBM. The results show that the relaxation process is a balance between two opposing effects: increased mobility due to thermal activation of P3HT molecules and decrease mobility due to the presence of PCBM which is correlated to the percent crystallinity of P3HT and local packing density of PCBM in the amorphous phase. The threshold for the domination of the thermally activated relaxation is between 5 and 9 vol.% of PCBM loading. Two distinct spatial dependences of the relaxation processes, in which the crossover length scale depends neither on temperature nor composition, were observed for all the samples. They were attributed to the collective motions of the hexyl side chains and the rotational motions of the C-C single bonds of the side chains. Finally, these results provide an understanding of the effects of PCBM loading and temperature on the dynamics of the polymer-fullerene blends which provides a tool to optimize the efficiency of charge carrier and exciton transport within the organic photovoltaic (OPV) active layer to improve the high performance of organic solar cells.

14 SOLAR ENERGY↗

Control of morphology and function of low band gap polymer–bis-fullerene mixed heterojunctions in organic photovoltaics with selective solvent vapor annealing

We reported how by replacing PCBM with a bis-adduct fullerene (i.e. ICBA) we significantly improve the open circuit voltage (VOC) and power conversion efficiency (PCE) in P3HT bulk heterojunctions. But, for the most promising low band-gap polymer (LBP) systems, replacing PCBM with ICBA results in very poor shortcircuit current (JSC) and PCE although the VOC is significantly improved. Therefore, in this work, we have completed small angle neutron scattering and neutron reflectometry experiments to study the impact of post-deposition solvent annealing (SA) with control of solvent quality on the morphology and performance of LBP bis-fullerene BHJ photovoltaics. Our results show that SA in a solvent that is selective for the LBP results in a depletion of bis-fullerene near the air surface, which limits device performance. SA in a solvent vapor which has similar solubility for polymer and bis-fullerene results in a higher degree of polymer ordering, bis-fullerene phase separation, and segregation of the bis-fullerene to the air surface, which facilitates charge transport and increases power conversion efficiency (PCE) by 100%. The highest degree of polymer ordering combined with significant bis-fullerene phase separation and segregation of bis-fullerene to the air surface is obtained by SA in a solvent vapor that is selective for the bis-fullerene. The resultant morphology increases PCE by 190%. These results indicate that solvent annealing with judicious solvent choice provides a unique tool to tune the morphology of LBP bisfullerene BHJ system, providing sufficient polymer ordering, formation of a bis-fullerene pure phase, and segregation of bis-fullerene to the air surface to optimize the morphology of the active layer. Furthermore, this process is broadly applicable to improving current disappointing LBP bis-fullerene systems to optimize their morphology and OPV performance post-deposition, including higher VOC and power conversion efficiency.

36 MATERIALS SCIENCE↗

Correlation of polymeric compatibilizer structure to its impact on the morphology and function of P3HT:PCBM bulk heterojunctions

Here we present the impact of various polymeric compatibilizers, including end-functionalized P3HTs and diblock copolymers containing P3HT, on the structure and function of poly(3-hexylthiophene) (P3HT):[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojunctions. Careful analyses of small angle neutron scattering curves provide a measure of the miscibility of PCBM in P3HT, the average PCBM domain size, and the interfacial area between PCBM and the P3HT-rich phase in the uncompatibilized and compatibilized systems. Differential scanning calorimetry (DSC) also provides information regarding the changes in the crystallinity of P3HT due to the presence of the compatibilizer. Results show that most compatibilizers cause the domain sizes to decrease and the P3HT crystallinity to increase; however, some cause an increase in domain size, suggesting that they are not effective interfacial modifiers. The correlation of morphology with photovoltaic activity shows that the decreased domain size, increased crystallinity and increased interfacial area do not always result in improved power conversion efficiency (PCE). It appears that the introduction of an insulating molecule at the PCBM:P3HT interface as a compatibilizer results in a decrease in PCE. Thus, the presence of the compatibilizer at this interface dominates the photovoltaic activity, rather than the morphological control.

36 MATERIALS SCIENCE↗