Search NASA⌕ Search

Engineering topics

Daemen, Luke

Publications and source records attributed to Daemen, Luke.

34 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Proposed Methodology for Evaluating and Validating TSLs [Slides]

This presentation begins by providing an overview of the research and discusses recent efforts in validating thermal neutron scattering cross sections, including differential cross section measurements at ORNL for evaluation and validation, total cross section measurements at RPI, pulsed-neutron die-away experiments at LLNL, and integral criticality experiments by LLNL. The presentation also proposes a methodology not only for validating thermal scattering files that utilizes all available experimental data, but also for evaluating new libraries as demonstrated on polystyrene. In conclusion, polystyrene evaluation was conducted using multiple experiments, including differential and integral. The proposed methodology has been shown to improve neutron transport and files have been submitted to NNDC for inclusion in ENDF/B-VIII.1 release. MCT-012 & PCM-002 has been relatively insensitive to changes in $\mathcal{S}(α,β)$. The research found that differences in differential results don’t always propagate to differences in integral results, hence why evaluation of differential data important. Future work on the project is also discussed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Status of ORNL TSL evaluations [Slides]

This presentation is on the status of Oak Ridge National Laboratory (ORNL) Thermal Scattering Evaluation (TSL) evaluations. A focus of this presentation centers on the preliminary work on Teflon and Polyethylene evaluation validation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Rapid and efficient hydrogen clathrate hydrate formation in confined nanospace

Clathrate hydrates are crystalline solids characterized by their ability to accommodate large quantities of guest molecules. Although CH 4 and CO 2 are the traditional guests found in natural systems, incorporating smaller molecules (e.g., H 2 ) is challenging due to the need to apply higher pressures to stabilize the hydrogen-bonded network. Another critical limitation of hydrates is the slow nucleation and growth kinetics. Here, we show that specially designed activated carbon materials can surpass these obstacles by acting as nanoreactors promoting the nucleation and growth of H 2 hydrates. The confinement effects in the inner cavities promote the massive growth of hydrogen hydrates at moderate temperatures, using pure water, with extremely fast kinetics and much lower pressures than the bulk system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Formation of a super-dense hydrogen monolayer on mesoporous silica

Adsorption on various adsorbents of hydrogen and helium at temperatures close to their boiling points shows, in some cases, unusually high monolayer capacities. The microscopic nature of these adsorbate phases at low temperatures has, however, remained challenging to characterize. Here, using high-resolution cryo-adsorption studies together with characterization by inelastic neutron scattering vibration spectroscopy, we show that, near its boiling point (~20 K), H 2 adsorbed on a well-ordered mesoporous silica forms a two-dimensional monolayer with a density more than twice that of bulk-solid H 2 , rather than a bilayer. Theoretical studies, based on thorough first-principles calculations, rationalize the formation of such a super-dense phase. The strong compression of the hydrogen surface layer is due to the excess of surface–hydrogen attraction over intermolecular hydrogen repulsion. Use of this super-dense hydrogen monolayer on an adsorbent might be a feasible option for the storage of hydrogen near its boiling point, compared with adsorption at 77 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Advanced Modeling and Simulations for Evaluation of Thermal Neutron Scattering Materials [Slides]

In this presentation, researchers detail tradeoffs between two simulation suites for thermal neutron scattering data. OXLIMAX + MCViNE provide a more accurate elastic peak shape and NJOY + MCNP have more accurate spectra between phonon mode peaks (most likely due to multiple neutron scattering). Additionally, some outstanding issues with MCViNE are noted, including multiple neutron scattering and non-uniform (Q,E) grid for data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Gapless Dirac magnons in CrCl3

Abstract Bosonic Dirac materials are testbeds for dissipationless spin-based electronics. In the quasi two-dimensional honeycomb lattice of CrX 3 (X = Cl, Br, I), Dirac magnons have been predicted at the crossing of acoustical and optical spin waves, analogous to Dirac fermions in graphene. Here we show that, distinct from CrBr 3 and CrI 3 , gapless Dirac magnons are present in bulk CrCl 3 , with inelastic neutron scattering intensity at low temperatures approaching zero at the Dirac K point. Upon warming, magnon-magnon interactions induce strong renormalization and decreased lifetimes, with a ~25% softening of the upper magnon branch intensity from 5 to 50 K, though magnon features persist well above T N . Moreover, on cooling below ~50 K, an anomalous increase in the a -axis lattice constant and a hardening of a ~26 meV phonon feature are observed, indicating magnetoelastic and spin-phonon coupling arising from an increase in the in-plane spin correlations that begins tens of Kelvin above T N .

36 MATERIALS SCIENCE↗
DOE OSTI2022

Study of the water dynamics near hydrophilic, nanostructured CuO surfaces by quasielastic and inelastic neutron scattering

We have used quasielastic and inelastic neutron scattering to investigate the structure, dynamics, and phase transitions of water interacting with superhydrophilic CuO surfaces that not only possess a strong affinity for water but also a “grass-like” topography that is rough on both micro- and nanoscales. Here, we report quasielastic neutron scattering (QENS) measurements on two samples differing in water content at five temperatures below 280 K. The QENS spectra show water undergoing two different types of diffusive motion near the CuO surfaces: a “slow” translational diffusion occurring on a nanosecond time scale and a faster rotational motion. Further from the surfaces, there is “fast” translational diffusion comparable in rate to that of bulk supercooled water and the rotational motion occurring in the interfacial water. Analysis of the QENS spectra supports wetting of water to the CuO blades as seen in electron microscopy images. In addition, we observe an anomalous temperature dependence of the QENS spectra on cooling from 270 to 230 K with features consistent with a liquid–liquid phase transition. We suggest that the solvent-like properties of the coexisting bulk-like water in our CuO samples are a significant factor in determining the temperature dependence of the interfacial water’s dynamics. Our results are compared with those obtained from two well-studied substrate classes: (1) silicas that contain ordered cylindrical nanopores but have weaker hydrophilicity and (2) nanoparticles of other transition-metal oxides, such as TiO 2 , which share the strong hydrophilicity of our samples but lack their porosity.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Uncovering the hydride ion diffusion pathway in barium hydride via neutron spectroscopy

Solid state materials possessing the ability for fast ionic diffusion of hydrogen have immense appeal for a wide range of energy-related applications. Ionic hydrogen transport research is dominated by proton conductors, but recently a few examples of hydride ion conductors have been observed as well. Barium hydride, BaH 2 , undergoes a structural phase transition around 775 K that leads to an order of magnitude increase in the ionic conductivity. This material provides a prototypical system to understand hydride ion diffusion and how the altered structure produced by the phase transition can have an enormous impact on the diffusion. We employ quasielastic and inelastic neutron scattering to probe the atomic scale diffusion mechanism and vibrational dynamics of hydride ions in both the low- and high-temperature phases. Jump lengths, residence times, diffusion coefficients, and activation energies are extracted and compared to the crystal structure to uncover the diffusion pathways. We find that the hydrogen jump distances, residence times, and energy barriers become reduced following the phase transition, allowing for the efficient conduction of hydride ions through a series of hydrogen jumps of length L = 3.1 Å.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Neutron Insights into Sorption Enhanced Methanol Catalysis

Sorption enhanced methanol production makes use of the equilibrium shift of the CO 2 hydrogenation reaction towards the desired products. However, the increased complexity of the catalyst system leads to additional reactions and thus side products such as dimethyl ether, and complicates the analysis of the reaction mechanism. On the other hand, the unusually high concentration of intermediates and products in the sorbent facilitates the use of inelastic neutron scattering (INS) spectroscopy. Despite being a post-mortem method, the INS data revealed the change of the reaction path during sorption catalysis. Concretely, the experiments indicate that the varying water partial pressure due to the adsorption saturation of the zeolite sorbent influences the progress of the reaction steps in which water is involved. Experiments with model catalysts support the INS findings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

On the Structural Transformation of Ni/BaH 2 During a N 2 -H 2 Chemical Looping Process for Ammonia Synthesis: A Joint In Situ Inelastic Neutron Scattering and First-Principles Simulation Study

The demand for decarbonizing the ammonia industry by using renewable energy has invoked increasing research interests into catalyst development for effective N 2 reduction under mild conditions. Hydride-based materials are among some of the emerging catalysts for ammonia synthesis at ambient pressure and low temperatures (< 673 K). A recent chemical looping process based on Ni/BaH 2 showed the most promise as it can realize ammonia production at a temperature as low as 373 K and under ambient pressure. However, the chemical transformation of the hydride catalyst at the molecular level remains unclear in this process. Here, we report detailed in situ neutron spectroscopy and diffraction investigations along with first-principles simulations on the structural transformation of Ni/BaH 2 during the nitridation and hydrogenation steps in the chemical looping process for ammonia synthesis. It was shown that a ball-milling process of the starting Ni/BaH 2 could significantly decrease the size of BaH 2 and increase the density of defects, thus potentially enhancing the reactivity of the hydride. The evolution from BaH 2 to barium imide (BaNH) was evidenced in the inelastic neutron scattering (INS) and neutron diffraction results during the N 2 reaction step. During the hydrogenation study, in addition to the recovery of BaH 2 , a possible intermediate species, N-deficient barium imide, was also detected. In comparing the N 2 and H 2 reaction steps, the neutron results indicate that the hydrogenation step appears more difficult than the nitridation step, confirming the facile N 2 fixation property of Ni/BaH 2 catalyst in ammonia synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Catalytic Enhancement of Inductively Heated Fe 3 O 4 Nanoparticles by Removal of Surface Ligands

Abstract Heat management in catalysis is limited by each material's heat transfer efficiencies, resulting in energy losses despite current thermal engineering strategies. In contrast, induction heating of magnetic nanoparticles (NPs) generates heat at the surface of the catalyst where the reaction occurs, reducing waste heat via dissipation. However, the synthesis of magnetic NPs with optimal heat generation requires interfacial ligands, such as oleic acid, which act as heat sinks. Surface treatments using tetramethylammonium hydroxide (TMAOH) or pyridine are used to remove these ligands before applications in hydrophilic media. In this study, Fe 3 O 4 NPs are surface treated to study the effect of induction heating on the catalytic oxidation of 1‐octanol. Whereas TMAOH was unsuccessful in removing oleic acid, pyridine treatment resulted in a roughly 2.5‐fold increase in heat generation and product yield. Therefore, efficient surfactant removal has profound implications in induction heating catalysis by increasing the heat transfer and available surface sites.

Moura, Natalia S.↗
DOE OSTI2020

Quest for an Optimal Methane Hydrate Formation in the Pores of Hydrolytically Stable Metal–Organic Frameworks

Porous metal–organic frameworks (MOFs) capable of storing a relatively high amount of dry methane (CH 4 ) in the adsorbed phase are largely explored; however, solid CH 4 storage in confined pores of MOFs in the form of hydrates is yet to be discovered. Here we report a rational approach to form CH 4 hydrates by taking advantage of the optimal pore confinement in relatively narrow cavities of hydrolytically stable MOFs. Unprecedentedly, we were able to isolate methane hydrate (MH) nanocrystals with an sI structure encapsulated inside MOF pores with an optimal cavity dimension. Furthermore, it was found that confined nanocrystals require cavities slightly larger than the unit cell crystal size of MHs (1.2 nm), as exemplified in the experimental case study performed on Cr- soc -MOF-1 vs smaller cavities of Y- shp -MOF-5. Under these conditions, the excess amount of methane stored in the pores of Cr- soc -MOF-1 in the form of MH was found to be ≈50% larger than the corresponding dry adsorbed amount at 10 MPa. More importantly, the pressure gradient driving the CH 4 storage/delivery process could be drastically reduced compared to the conventional CH 4 -adsorbed phase storage on the dry Cr- soc -MOF-1 (≤3 MPa vs 10 MPa).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Inelastic neutron scattering evidence for anomalous H–H distances in metal hydrides

Hydrogen-containing materials are of basic as well as technological interest. An outstanding question for both is the amount of hydrogen that can be incorporated in such materials, because that determines dramatically their physical properties such as electronic and crystalline structure. The number of hydrogen atoms in a metal is controlled by the interaction of hydrogens with the metal and by the hydrogen–hydrogen interactions. It is well established that the minimal possible hydrogen–hydrogen distances in conventional metal hydrides are around 2.1 Å under ambient conditions, although closer H–H distances are possible for materials under high pressure. We introduce inelastic neutron scattering measurements on hydrogen in Z r V 2 H x showing nonexpected scattering at low-energy transfer. The analysis of the spectra reveals that these spectral features in part originate from hydrogen vibrations confined by neighboring hydrogen at distances as short as 1.6 Å. These distances are much smaller than those found in related hydrides, thereby violating the so-called Switendick criterion. The results have implications for the design and creation of hydrides with additional properties and applications.

74 ATOMIC AND MOLECULAR PHYSICS↗