Search NASA⌕ Search

Engineering topics

Dai, Sheng

Publications and source records attributed to Dai, Sheng.

59 records · Page 4

Facile Room-Temperature Electrodeposition of Rare Earth Metals in a Fluorine-Free Task-Specific Electrolyte

Electrochemical deposition of rare earth metals at room temperature has attracted increasing interest due to its advantage in energy efficiency over traditional hydrometallurgical and pyrometallurgical processes. Recent progress has been made with fluorinated electrolyte systems; however, the formation of an electrode-passivating fluoride layer by electrolyte decomposition is often overlooked. Such a passivation layer causes significant and rapid decay of the deposition current and significantly hinders practical application. To address this issue, we demonstrate a fluorine (F)-free task-specific electrolyte utilizing the borohydride anion for the efficient electrodeposition of rare earth metals. By eliminating the passivation effect, the deposition process exhibits a stable current and accumulates a thick neodymium deposit on the electrode. Raman spectroscopy of the electrolyte reveals a synergetic effect between rare earth borohydride and lithium borohydride which promotes the dissociation of both borohydride salts, resulting in significantly increased ionic conductivity and electrochemical performance. Cyclic voltammetry and in-depth X-ray photoelectron spectroscopy of the deposits suggest that the electrodeposition of rare earth metals could undergo a Li-mediated reduction process. Finally, quantitative analysis of the deposits reveals that the overall concentration of the rare earth elements reaches 75% which contains 40–48% metallic phase.

36 MATERIALS SCIENCE↗

Tailored mesoporous structures of lignin-derived nano-carbons for multiple applications

This work uses a one-step KOH activation for lignin precursors to produce ultra-high mesoporous activated carbons (ACs) with an unprecedented combination of the surface area of 3207 m 2 g -1 and mesopore ratio of 76%. The ACs are applied for supercapacitors (SCs) and methylene blue (MB) adsorption. The capacitance of the SCs in the three-electrode system reaches 812.3 F g -1 and demonstrates a remarkable maximum MB adsorption capacity of 1250 mg g -1 . By modifying the process conditions, the mesopore ratio of ACs could be controlled from 10% to 80%. Compared with one-step activation, a two-step method produced microporous carbons with a lower surface area of 1227 m 2 g -1 and a high micropore ratio of 73%. The capacitance of SCs with two-step ACs reached 228.1 F g -1 and the maximum adsorption capacity of 476.19 mg g -1 for MB adsorption. The two-step method limited the surface area but had a higher oxygen surface functionality, benefiting its electrochemical performance. A techno-economic analysis reveals that the one-step KOH activation-based process develops ACs with a minimum selling price of $7648/ton. In conclusion, this work demonstrates tuning the processing-structure-property-performance relationship of lignin-based ACs to make an economically viable domestic carbon source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Ion‐Exchange Metathesis Induced Conformal LiF Surface Films on Cathode (NMC811) as a Cathode Electrolyte Interphase

High-capacity cathodes (LiNi 0.8 Mn 0.1 Co 0.1 O 2 , NMC811) are promising for vehicle electrification because of their high gravimetric energy density. However, their electrochemical performance still relies upon the stability of the cathode electrolyte interphase (CEI). A highly reactive cathode interface leads to parasitic side reactions with electrolytes, resulting in accelerated capacity fading. Well-developed LiF and LiF-like inorganic compounds are believed to be good CEI components for stabilizing such reactive electrode interfaces. However, it is challenging to form an optimal surface sub-nanolayer of LiF on the cathode surfaces because of the complexity of the electrochemical reaction during battery cycling. Herein, the formation of a conformal LiF layer on the NMC811 electrode surface via an in situ ion-exchange metathesis process is reported, demonstrating a promising electrochemical performance because of a LiF-stabilized CEI. In situ generated LiF-coated NMC811 electrodes exhibit ≈97% capacity retention up to 100 cycles at a 0.3 C rate with average coulombic efficiency of ≈99.9% and ≈80% capacity retention up to 200 cycles at a 1 C rate with average coulombic efficiency of >99.6%. This finding may pave the way for reengineering the CEI to enhance the electrochemical performances and cycling stability of the high-capacity cathodes.

25 ENERGY STORAGE↗