Search NASA⌕ Search

Engineering topics

Dang, Khanh Quoc

Publications and source records attributed to Dang, Khanh Quoc.

Structure and migration of heavily irradiated grain boundaries and dislocations in Ni in the athermal limit

The microstructural evolution at and near preexisting grain boundaries (GBs) and dislocations in materials under high radiation doses is still poorly understood. In this work, we use the creation relaxation algorithm (CRA) developed for atomistic modeling of high-dose irradiation in bulk materials to probe the athermal limit of saturation of GB and dislocation core regions under irradiation in fcc Ni. We find that, upon continuously subjecting a single dislocation or GB to Frenkel pair creation in the athermal limit, a local steady-state disordered defect structure is reached with excess properties that fluctuate around constant values. Case studies are given for a straight screw dislocation which elongates into a helix under irradiation and several types of low- and high-angle GBs, which exhibit coupled responses such as absorption of extrinsic dislocations, roughening, and migration. A positive correlation is found between the initial GB energy and the local steady-state GB energy under irradiation across a wide variety of GB types. Metastable GB structures with similar density in the defect core region but different initial configurations are found to converge to the same limiting structure under CRA. The mechanical responses of pristine and irradiated dislocations and GB structures are compared under an applied shear stress. Irradiated screw and edge dislocations are found to exhibit a hardening response, migrating at larger flow stresses than their pristine counterparts. Mobile GBs are found to exhibit softening or hardening responses depending on GB character. Although some GBs recover their initial pristine structures upon migration outside of the radiation zone, many GBs sustain different flow stresses corresponding to altered mobile core structures.

36 MATERIALS SCIENCE↗

Properties of Accelerating Edge Dislocations in Arbitrary Slip Systems with Reflection Symmetry

We discuss the theoretical solution to the differential equations governing accelerating edge dislocations in anisotropic crystals. This is an important prerequisite to understanding high-speed dislocation motion, including an open question about the existence of transonic dislocation speeds, and subsequently high-rate plastic deformation in metals and other crystals.

36 MATERIALS SCIENCE↗

Hybrid interatomic potential for Sn

To design materials for extreme applications, it is important to understand and predict phase transitions and their influence on material properties under high pressures and temperatures. Atomistic modeling can be a useful tool to assess these behaviors. However, this can be difficult due to the lack of fidelity of the interatomic potentials in reproducing this high pressure and temperature extreme behavior. Here, in this work, a hybrid EAM-R—which is the combination of embedded atom method (EAM) and rapid artificial neural network potential—for Tin (Sn) is described which is capable of accurately modeling the complex sequence of phase transitions between different metallic polymorphs as a function of pressure. This hybrid approach ensures that a basic empirical potential like EAM is used as a lower energy bound. By using the final activation function, the neural network contribution to energy must be positive, assuring stability over the whole configuration space. This implementation has the capacity to reproduce density functional theory results at 6 orders of magnitude slower than a pair potential for molecular dynamics simulation, including elastic and plastic characteristics and relative energies of each phase. Using calculations of the Gibbs free energy, it is demonstrated that the potential precisely predicts the experimentally observed phase changes at temperatures and pressures across the whole phase diagram. At 10.2 GPa, the present potential predicts a first-order phase transition between body-centered tetragonal (BCT) β-Sn and another polymorph of BCT-Sn. This structure transforms into body-centered cubic near the experimentally reported value at 33 GPa. Thus, the Sn potential developed in this paper can be used to study complex deformation mechanisms under extreme conditions of high pressure and strain rates unlike existing potentials. Moreover, the framework developed in this paper can be extended for different material systems with complex phase diagrams.

36 MATERIALS SCIENCE↗

Sensitivity of Dislocation-GB interactions to simulation setups in atomistic models

Dislocation-grain boundary (GB) interactions play an integral role in strengthening of crystalline materials, and are dependent on external loading conditions and atomic arrangements at the grain boundary. While molecular dynamics (MD) simulations can provide critical insights into relationships between these parameters and the exact interaction, the outcomes are sensitive to the computational setup. Here, in this work, we explore the effect of computational setup (system size, GB orientation and boundary conditions) on stress-controlled dislocation-grain boundary (DGB) reactions using MD simulations for a well-studied copper symmetric $\langle$1 1 2$\rangle$ tilt boundary. The study demonstrates that the DGB reactions (pinning, absorption, transmission, etc.) are sensitive to the system size and the orientation of the GB to the applied stress. Additionally, the current work shows that there is a critical system size for the dislocation-grain boundary reaction stresses to converge, one which was found to be much larger than the setups in comparable MD studies. This was attributed to the specific stress states and the influence of surfaces, fixed or free, as these computational setups are modified. Finally, a stress-controlled setup with minimal model artifacts is examined, and the effect of coupled Schmid and non-Schmid stress components on the dislocation-GB reactions are discussed.

36 MATERIALS SCIENCE↗

LAVA 1.0: A general-purpose python toolkit for calculation of material properties with LAMMPS and VASP

Here, we introduce LAVA, a general-purpose python toolkit to provide user-friendly and high throughput calculations for material properties using both LAMMPS and VASP. It contains a set of classes as well as pre-processing and post-processing functions to prepare, execute and extract information from LAMMPS/VASP simulations. An overview of the program structure is provided. The current version contains modules to calculate elastic and mechanical properties such as lattice constant, cohesive energy, cold curve, elastic constants, bulk and shear modulus, volume conserving/non-conserving deformation path, vacancy/interstitial formation energy, surface energy, stacking fault energy, melting point, radial distribution function, and thermal expansion. These functionalities are demonstrated for different interatomic potentials and DFT calculations in Al.

36 MATERIALS SCIENCE↗

The role of deviatoric stress and dislocations on the α to ω phase transformation in Ti

Under extreme conditions, α-Ti becomes unstable and transforms either into β-Ti at high temperature or into ω-Ti at high pressure. In what concerns the α to ω phase transformation (PT), there has been a wide range of experimentally reported transition pressures from approximately 2 to 15 GPa at room temperature. Deviatoric stresses and internal defects are often assumed to be the root cause of this variation. Here, in this study, these postulates are revisited using both continuum mechanics and molecular dynamics (MD) simulations. First, a simple continuum model, assuming linear elasticity and isotropic plasticity, is developed to describe the effects of applied stress and dislocations on the stability of an ω nucleus in an infinite α domain. Second, a new MD simulation method is developed to generate an ω nucleus in the α domain utilizing the displacement field identified from the topological analysis. Results from MD simulations show that despite the fact that phase diagrams typically delineate the limits between two phases in terms of only P and T, deviatoric stress promotes the α to ω phase transformation by reducing the critical radius above which an ω nucleus is stable. Furthermore, the required deviatoric stress to nucleate and stabilize a nanoscale ω nucleus is likely emanating from the internal stress of defects such as dislocations. The MD-informed micromechanics models are used to identify favorable configurations where dislocations help favor the α to ω transformation. These configurations show that the interaction with a basal or prismatic dislocation reduces the critical radius of a ω nucleus by about 10 or 16 %, respectively. In addition, prismatic edge dislocations are found to promote the growth of ω nucleus when interacting with the ($\bar{1}$$\bar{1}$20) α //(0001) ω interface. Importantly, a simple model of the arrival of dislocation at an ω nucleus suggests that PT does not necessarily require a pile-up to be present but could alternatively be mediated by a constant rapid flow of dislocations.

36 MATERIALS SCIENCE↗

Limiting velocities and transonic dislocations in Mg

To accurately predict the mechanical response of materials, especially at high strain rates, it is important to account for dislocation velocities in these regimes. Under these extreme conditions, it has been hypothesized that dislocations can move faster than the speed of sound. However, the presence of such dislocations remains elusive due to challenges associated with measuring these experimentally. In this work, molecular dynamics simulations were used to investigate the dislocation velocities for the basal edge, basal screw, prismatic edge, and prismatic screw dislocations in Mg in the sub-, trans-, and supersonic regimes. Also, our results show that only prismatic edge dislocations achieve supersonic velocities. Furthermore, this work demonstrates that the discrepancy between the theoretical limiting velocity and the MD results for Mg is due to its sensitivity to large hydrostatic stress around the dislocation core, which was not the case for fcc metals such as Cu.

36 MATERIALS SCIENCE↗

Atomistic and phase field simulations of three dimensional interactions of {$10\bar12$} twins with grain boundaries in Mg: twin transmission and dislocation emission

In polycrystals, the interaction of dislocations and twins with grain boundaries (GBs) plays a role in hardening and formability during plastic deformation. While dislocation-GB interactions are relatively well-understood, twin-GB interactions remain mostly unknown. In this work, an approach using molecular dynamics and phase-field simulations is followed to study the forward and lateral interactions between {$10\bar12$} twins and tilt grain boundaries in Mg. Molecular dynamics results show that the resolved shear stress on slip/twinning modes of the neighboring grain, not the geometric alignment, is the dominant factor in determining the outcome of the twin-GB interactions. For some lateral interaction configurations, as the misorientation angle increases, the resolved shear stress on the same {$10\bar12$} twin variant of the neighboring grain reduces while it increases for slip or I 2 stacking fault emissions or other twin modes such as {$11\bar12$} and {$10\bar11$}, explaining why twin transmission is not seen at high misorientation angles. Furthermore, lateral and forward interactions of the twin with tilt grain boundaries whose misorientation axes are normal to the coherent twin boundary show significantly different outcomes. For the forward interaction, the twin is absorbed and stacking faults are emitted when interacting for low misorientation angles (up to 30°) while the lateral interaction results in twin transmission, nucleation of a {$11\bar12$} twin, and emission of I 2 stacking faults. Finally, comparisons between twin interactions with symmetric and asymmetric tilt GBs with different GB structures show similar outcomes.

36 MATERIALS SCIENCE↗

Three-dimensional atomic scale characterization of {11$\overline{2}$2} twin boundaries in titanium

The {11$\overline{2}$2}<11$\overline{23}$> compression twin can accommodate a considerable amount of strain under c-axis compression in Ti. However, unlike the tensile twin, the structure of the {10$\overline{1}$2}$\langle$$\overline{1}$011$\rangle$ compressive twins has not been completely characterized. In this study, we apply a combined technique of HR-TEM characterization, topological analysis, and atomistic simulations to explore the facets that bound the {11$\overline{2}$2}<11$\overline{23}$> twin in Ti. In addition to the currently known facets (CTB and B-Py), six new facets are observed and categorized for the first time from atomic-scale TEM observations along five crystallographic directions. The six new facets are (11$\overline{2}$0)//(11$\overline{2}$6), PrPr1, PyPy1, (2$\overline{11}$1)//($\overline{1}$2$\overline{1}$2), (1$\overline{1}$04)//(01$\overline{11}$), and (01$\overline{1}$0)//(2$\overline{11}$4). Results from the topological and computational analysis are in reasonable agreement with and support the HRTEM observations. Specifically, (1) the observed facets align with low-index interfaces in both twin and matrix domains, (2) the facets with lower surface energies are found to form extended interfaces, and (3) high-surface-energy facets are found at the twin tip region and explained by the fact that the energy of the combined facet and facet junction configuration is energetically preferred in the twin tip region. These results not only provide a comprehensive understanding of the 3D structure of the {11$\overline{2}$2}<11$\overline{23}$> compressive twins in Ti, but also validate the MD procedure and the Ti interatomic potential employed. This is extremely important for future study of the {11$\overline{2}$2} twin mobility and interactions with other defects, both features that remain extremely challenging to capture in experiments.

36 MATERIALS SCIENCE↗

Formation and stability of long basal-prismatic facets in Mg

Long BP facets bounding {101¯2} 1¯011 twins in Mg ( ≥ 4nm) have been observed experimentally. However, the formation of these long BP facets has not been studied and their contribution/role to the twin growth remains unclear. We observed a long straight BP facet (27 nm) using high-resolution transmission electron microscopy (HRTEM) and investigated its formation, stability, and mobility by atomistic simulations. Experimentally, a serrated twin interface containing short CTBs and short BP facets near a (101¯2) twin tip is observed to transform under the effects of the electron beam into a long straight semi-coherent BP facet that contains disclination dipoles. Molecular dynamics (MD) simulations of the relaxation of a 3D twin domain reveals another process whereby a long partially-relaxed BP interface forms and contains an I 2 stacking fault. A comparison between the energy of these configurations as obtained by atomistic simulations suggests that these transformations occur in two steps: (1) serrated interfaces composed of coherent BP segments with lengths less than 2 nm combine and form a long and straight coherent BP facets and (2) these long coherent BP facets quickly transform into relaxed ones with misfit defects. Importantly, it is found that long BP facets are relatively immobile, and upon reloading, decay into more mobile serrated interfaces prior to migrating. Here, the work presented suggests that the atomistic configurations of BP facets during twin growth processes differ significantly from relaxed BP interfaces that would be observed by TEM.

36 MATERIALS SCIENCE↗