Search NASA⌕ Search

Engineering topics

Darsell, Jens T

Publications and source records attributed to Darsell, Jens T.

Hole-Rich Host Materials for Blue Phosphorescent OLEDs

Stable and efficient organic light emitting devices (OLEDs) are an integral part of the future of lighting and displays. The hole accumulation at the hole transport/emissive layer interface in such devices is considered to be a major pathway for degradation and efficiency loss. Here we report the design and synthesis of two charge-transporting host materials, based on the phosphine oxide (PO) moiety, engineered to improve hole transport of the emissive layer. The compounds are an extension of a molecular design strategy already explored and reported by our team which incorporates a hole transporting moiety and an electron transporting moiety. These novel materials were designed with two hole transport moieties (HTms) to further improve hole transport, compared to the first generation host materials that were designed with one hole transport functional group. The triplet exciton energy was maintained at a level greater than that of FIrpic (2.7 eV) to prevent exciton quenching. The EHOMO and ELUMO of the two classes of molecules (i.e., one HTm vs. 2 HTms) were similar, however their device performance varied greatly. Emission zone experiments were conducted to further understand the differences between molecules.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Phosphine Oxide Based Electron Transporting and Hole Blocking Materials for Blue Electrophosphorescent Organic Light Emitting Devices

We report the design, synthesis, thermal, and photophysical properties of two phosphine oxide based electron transport/hole blocking materials, 2,6-bis(4-(diphenylphosphoryl)phenyl)pyridine (BM-A11) and 2,4-bis(4-(diphenyl-phosphoryl)phenyl)pyridine (BM-A10) for blue electrophosphorescent organic light emitting devices (OLEDs). The use of these materials in blue OLED with iridium (III) bis[(4,6-difluorophenyl)-pyridinato-N,C2’]picolinate (Firpic) as the phosphor was demonstrated. Using the dual host device architecture with BM-A10 as the ETM yields a maximum EQE of 8.9% with a power efficiency of 21.5 lm/W (4.0V and 35 cd/m2). When BM-A11 is used as the ETM, the maximum EQE and power efficiency improves to 14.9% and 48.4 lm/W, respectively (3.0V and 40 cd/m2).

36 MATERIALS SCIENCE↗

High Temperature Strength of YSZ Joints Brazed with Palladium Silver Copper Oxide Filler Metals

The Ag-CuOx system is being investigated as potential filler metals for use in air brazing high-temperature electrochemical devices such as solid oxide fuel cells and gas concentrators. The current study examines the effects of palladium addition on the high temperature joint strength of specimens prepared from yttria stabilized zirconia (YSZ) bars brazed with the binary Ag-CuOx, and 15Pd-Ag-CuO. It was found that while the binary Ag-CuOx system exhibits stronger room temperature strength than the 15Pd system the strength is reduced to values equivalent of the 15Pd system at 800°C. The 15Pd system exhibits a lower ambient temperature strength that is retained at 800°C. In both systems the failure mechanism at high temperature appears to be peeling of the noble metal component from the oxide phases and tearing through the noble metal phase whereas sufficient adhesion is retained at lower temperatures to cause fracture of the YSZ substrate.

30 DIRECT ENERGY CONVERSION↗

A High-temperature Sealing Technology for Solid Oxide Fuel Cells

A reliable, cost-effective high-temperature sealing technology for the joining of ceramic components to metallic structures is critical to the successful development of solid oxide fuel cells (SOFCs). In this paper, our latest development of a novel reactive air brazing (RAB) technology will be presented. This RAB technology uses Ag-CuO as the base braze composition with a variety of additional elements. With a proper processing control, the resultant sealing technology is capable of providing a high-temperature sealing with sufficient chemical inertness, thermal reliability, and bonding strength. We will present in this paper our latest studies on the composition design/synthesis of braze filler materials, and the characterizations including wettability, microstructure, and mechanical properties, as well as a preliminary numerical simulation addressing the residual stress generated during the processing.

30 DIRECT ENERGY CONVERSION↗