Search NASA⌕ Search

Engineering topics

Das, Dipankar

Publications and source records attributed to Das, Dipankar.

Enhanced magnetoelectric properties of BiFeO{sub 3} on formation of BiFeO{sub 3}/SrFe{sub 12}O{sub 19} nanocomposites

Nanocomposites (NCs) comprising (1−x) BiFeO{sub 3} (BFO) and x SrFe{sub 12}O{sub 19} (SRF) (x = 0.1, 0.2, 0.3, and 0.4) have been prepared by a sol-gel route. Presence of pure phases of both BiFeO{sub 3} (BFO) and SrFe{sub 12}O{sub 19} (SRF) in the NCs for x = 0.3 and 0.4 has been confirmed by Rietveld analysis of XRD data though a minor impurity phase is observed in the case of x = 0.1 and 0.2 NCs. Transmission electron micrographs of the NCs show that particles are mostly spherical with average size of 30 nm. M-H measurements at 300 and 10 K indicate predominantly ferrimagnetic behavior of all the NCs with an increasing trend of saturation magnetization values with increasing content of SRF. Dielectric constant (ε{sub r}) of the NCs at room temperature shows a dispersive behavior with frequency and attains a constant value at higher frequency. ε{sub r} − T measurements reveal an increasing trend of dielectric constant of the NCs with increasing temperature and show an anomaly around the antiferromagnetic transition temperature of BFO, which indicates magnetoelectric coupling in the NCs. The variation of capacitance in the presence of magnetic field confirms the enhancement of magnetoelectric effect in the NCs. {sup 57}Fe Mössbauer spectroscopy results indicate the presence of only Fe{sup 3+} ions in usual crystallographic sites of BFO and SRF.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of α-Fe{sub 2}O{sub 3}-functionalised graphene oxide nanocomposite by a facile low temperature method and study of its magnetic and hyperfine properties

Highlights: • Synthesis of reduced graphene oxide (rGO)/α-Fe{sub 2}O{sub 3} nanocomposites (NCs) by sol–gel method. • Samples exhibited ferromagnetism originated due to surface canted spins. • rGO enhanced the value of saturation magnetization and coercivity of the bare nanoparticle. • RKKY coupling between the isolated rGO spins and the magnetic nanoparticles. - Abstract: Reduced graphene oxide/α-Fe{sub 2}O{sub 3} nanocomposites were synthesized by a simple sol–gel method. Initially, the samples were investigated by X-ray diffraction, high resolution transmission electron microscopy and Raman spectroscopy. High resolution transmission electron micrographs indicate that the magnetic nanoparticles are well dispersed in the reduced graphene oxide sheet-like structure. Fourier transform infrared spectroscopy studies corroborate the results obtained by X-ray diffraction. Temperature as well as field dependent magnetic measurements revealed ferromagnetism in the pristine α-Fe{sub 2}O{sub 3} as well as in the nanocomposite sample that is attributed to surface canted spins and defects present in the samples. The enhanced value of coercivity in case of the nanocomposite sample could be ascribed to the Ruderman–Kittel–Kasuya–Yosida type of interaction between the isolated reduced graphene oxide spin and the magnetic ions. Presence of super paramagnetic doublet as well as sextet patterns related to hematite phase is confirmed by the {sup 57}Fe-Mössbauer spectroscopy.

36 MATERIALS SCIENCE↗

Improving concurrency and asynchrony in multithreaded MPI applications using software offloading

We present a new approach for multithreaded communication and asynchronous progress in MPI applications, wherein we offload communication processing to a dedicated thread. The central premise is that given the rapidly increasing core counts on modern systems, the improvements in MPI performance arising from dedicating a thread to drive communication outweigh the small loss of resources for application computation, particularly when overlap of communication and computation can be exploited. Our approach allows application threads to make MPI calls concurrently, enqueuing these as communication tasks to be processed by a dedicated communication thread. This not only guarantees progress for such communication operations, but also reduces load imbalance. Our implementation additionally significantly reduces the overhead of mutual exclusion seen in existing implementations for applications using MPI THREAD MULTIPLE. Our technique requires no modification to the application, and we demonstrate significant performance improvement (up to 2X) for QCD, 1-D FFT and deep learning CNN applications.

Vaidyanathan, Karthikeyan↗

Higher Fe{sup 2+}/total Fe ratio in iron doped phosphate glass melted by microwave heating

Highlights: • Iron doped phosphate glasses prepared using microwave heating and conventional heating under air and reducing atmosphere. • Presence of iron predominantly in the ferrous oxidation state in all the glasses. • Significant concentrations of iron in the ferrous oxidation state on both octahedral and tetrahedral sites in all the glasses. • Ratio of Fe{sup 2+} with total iron is found higher in microwave prepared glasses in comparison to conventional prepared glasses. - Abstract: Iron doped phosphate glasses containing P{sub 2}O{sub 5}–MgO–ZnO–B{sub 2}O{sub 3}–Al{sub 2}O{sub 3} were melted using conventional resistance heating and microwave heating in air and under reducing atmosphere. All the glasses were characterised by UV–Vis–NIR spectroscopy, Mössbauer spectroscopy, thermogravimetric analysis and wet colorimetry analysis. Mössbauer spectroscopy revealed presence of iron predominantly in the ferrous oxidation state on two different sites in all the glasses. The intensity of the ferrous absorption peaks in UV–Vis–NIR spectrum was found to be more in glasses prepared using microwave radiation compared to the glasses prepared in a resistance heating furnace. Thermogravimetric analysis showed increasing weight gain on heating under oxygen atmosphere for glass corroborating higher ratio of FeO/(FeO + Fe{sub 2}O{sub 3}) in glass melted by direct microwave heating. Wet chemical analysis also substantiated the finding of higher ratio Fe{sup +2}/ΣFe in microwave melted glasses. It was found that iron redox ratio was highest in the glasses prepared in a microwave furnace under reducing atmosphere.

36 MATERIALS SCIENCE↗

Tin dioxide nanoparticles: Reverse micellar synthesis and gas sensing properties

Tin dioxide (SnO{sub 2}) nanoparticles have been synthesized by reverse micellar route using cetyltrimethyl ammoniumbromide (CTAB) as the surfactant. Monophasic tin dioxide (SnO{sub 2}) was obtained using NaOH as the precipitation agent at 60 deg. C, however, when liquor NH{sub 3} was used as precipitating agent then crystalline SnO{sub 2} nanoparticles are obtained at 500 deg. C. SnO{sub 2} prepared using NaOH show crystallite size of 4 and 12 nm after heating at 60 and 500 deg. C respectively using X-ray line broadening studies. Transmission electron microscopy (TEM) studies show agglomerated particles of sizes 70 and 150 nm, respectively. The grain size was found to be 6-8 nm after heating the precursor obtained (using liquor NH{sub 3}) at 500 deg. C by X-ray line broadening and the TEM studies. Dynamic light-scattering (DLS) studies show the aggregates of SnO{sub 2} nanoparticles with uniform size distribution. Moessbauer studies show an increase of s-electron density at the Sn sites compared to bulk SnO{sub 2} and a finite quadrupole splitting indicative of lowering of symmetry around tin atoms. The gas sensing characteristics have also been investigated using n-butane which show high sensitivity and fast recovery time.

36 MATERIALS SCIENCE↗

Laser cooling of {sup 173}Yb for isotope separation and precision hyperfine spectroscopy

The hyperfine transitions in the 399 nm {sup 1}S{sub 0}{r_reversible}{sup 1}P{sub 1} line in {sup 173}Yb overlap with the transition in {sup 172}Yb. We use transverse laser cooling on this line to selectively deflect {sup 173}Yb atoms from a thermal beam containing both isotopes. We then use an acousto-optic modulator to span the frequency difference between the hyperfine transitions, and hence measure hyperfine structure in the {sup 1}P{sub 1} state. Our precise values for the hyperfine constants, A{sub 173}=57.693{+-}0.006 MHz and B{sub 173}=609.028{+-}0.056 MHz, improve previous values significantly.

74 ATOMIC AND MOLECULAR PHYSICS↗