Search NASA⌕ Search

Engineering topics

David E Flittner

Publications and source records attributed to David E Flittner.

Near-Global Variability of Stratospheric Water Vapor Observed by SAGE III/ISS

The Stratospheric Aerosol and Gas Experiment III instrument on the International Space Station (SAGE III/ISS) has been making high quality solar occultation measurements of stratospheric water vapor since June 2017. Here we evaluate the large-scale geophysical variability of the SAGE III/ISS water vapor measurements for the first 3 years of observations (2017–2020) as part of data validation for retrieval version 5.1 (v5.1). Detailed comparisons of SAGE III/ISS v5.1 with the Aura Microwave Limb Sounder (MLS) version 5 retrievals show overall excellent agreement in terms of seasonal mean structure and large-scale variability. SAGE III/ISS data capture the well-known seasonal variations in water vapor including the vertically propagating “tape recorder” in the tropics and lower stratospheric maxima linked to the NH summer monsoons. The high vertical resolution (∼2 km) measurements from SAGE III/ISS demonstrate contributions of the monsoons to the wet phase of “tape recorder” during the Northern Hemisphere (NH) summer. Interannual variations over the short data record are also consistent between SAGE III/ISS and MLS in the stratosphere between 16 and 30 km. We furthermore evaluate large-scale variations in relative humidity (RH) derived from the high vertical resolution SAGE III/ISS water vapor measurements, highlighting the detailed seasonal behavior and links to thermal structure near the tropical tropopause. Spatial distributions of RH at the cold point tropopause (CPT) show a close link between high RH and the minimum CPT temperature in both the NH winter and summer, consistent with temperature control of water vapor near the tropopause.

water vapor↗

Accounting for the photochemical variation in stratospheric NO2 in the SAGE III/ISS solar occultation retrieval

The Stratospheric Aerosol and Gas Experiment (SAGE) III has been operating on the International Space Station (ISS) since mid-2017. Nitrogen dioxide (NO2) number density profiles are routinely retrieved from SAGE III/ISS solar occultation measurements in the middle atmosphere. Although NO2 density varies throughout the day due to photochemistry, the standard SAGE NO2 retrieval algorithm neglects these variations along the instrument’s line of sight by assuming that the number density has a constant gradient within a given vertical layer of the atmosphere. This assumption will result in a retrieval bias for a species like NO2 that changes rapidly across the terminator. In this work we account for diurnal variations in retrievals of NO2 from the SAGE III/ISS measurements, and we determine the impact of this algorithm improvement on the resulting NO2 number densities. The first step in applying the diurnal correction is to use publicly available SAGE III/ISS products to convert the retrieved number density profiles to optical depth profiles. The retrieval is then re-performed with a new matrix that applies photochemical scale factors for each point along the line of sight according to the changing solar zenith angle. In general NO2 that is retrieved by accounting for these diurnal variations is more than 10% lower than the standard algorithm below 30 km. This effect is greatest in winter at high latitudes and generally greater for sunrise occultations than sunset. Comparisons with coincident profiles from the Optical Spectrograph and InfraRed Imager System (OSIRIS) show that NO2 from SAGE III/ISS is generally biased high; however the agreement improves by up to 20% in the mid-stratosphere when diurnal variations are accounted for in the retrieval. We conclude that diurnal variations along the SAGE III/ISS line of sight are an important term to consider for NO2 analyses at altitudes below 30 km.

Stratospheric NO2↗

Three years of observations from the International Space Station (ISS) by the Stratospheric Aerosol and Gas Experiment III (SAGE III/ISS)

After completion of the robot installation on the International Space Station (ISS) in early March 2017 as an external hosted science payload, the Stratospheric Aerosol and Gas Experiment (SAGE) III became the newest member to the family of space-based solar occultation instruments operated by NASA to investigate the Earth’s upper atmosphere since the late 1970s. One of three identical instruments, the SAGE III/ISS mission was revived in the early 2010s with a primary objective to monitor the vertical distribution of aerosol, ozone and other trace gases to enhance understanding of ozone recovery and climate change processes in the upper atmosphere. Presented here is the mission architecture, its implementation, and data produced by SAGE III/ISS, including their precision and coverage. The 51.6-degree inclined orbit of the ISS is well-suited for solar occultation and provides near-global observations on a monthly basis with coverage of low and mid-latitudes similar to that of the SAGE II mission, which operated over two decades. The nominal science products, derived from sampling spectra covering 290nm to 1030nm and a photo-diode near 1550 nm, include high resolution vertical profiles of ozone, nitrogen dioxide and water vapor, along with multi-wavelength aerosol extinction. Although in the visible portion of the spectrum the brightness of the Sun is a million times that of the full Moon, the SAGE III instrument design covers this large dynamic range, performing lunar occultations on a routine basis to augment the solar products. The standard lunar products include ozone and nitrogen trioxide. Routine observations began June 2017 and continue to the present. This has enabled observations of significant perturbations of the stratosphere induced by three different wildfire events (two of which were record setting), four volcanic eruptions and two changes of the Quasi-Biennial Oscillation (QBO) phase, as represented in the standard data products.

ozone↗

SAGE III on ISS: Mission Update and Science Milestone Results and Future Plans

The Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) has been collecting data on the stratosphere almost continuously for 4 years since the first light milestone was achieved on March 17, 2017. In that time, the SAGE III/ISS data products have withstood robust assessments both internal and external, using comparisons to data sets both in-situ and spaceborne, and incorporated improvements into the retrieval algorithm and the science data products themselves. With the new v5.2 release of the SAGE III/ISS science data product algorithm, improvements made to the aerosol and water vapor products have produced better correlations with both MLS and balloonsonde data. At this 4-year milestone, we will look back on the last 4 years of data collection highlighting SAGE III/ISS ozone and aerosol data from 2017-2020 in a 6-minute video highlighting the SAGE III mission. An overview of mission operations and the challenges of operating a science mission on the ISS will highlight lessons learned and the mission science objectives completed during the first three years of the mission. The future goals for the SAGE III/ISS mission, as we continue operations and science collection, will round out the presentation.

Marilee M Roell↗

The Stratospheric Aerosol & Gas Experiment III (SAGE III) on the International Space Station (ISS): Challenges and Successes of Operating an Optical Payload on ISS

The Stratospheric Aerosol and Gas Experiment III on the International Space Station (SAGE III/ISS) has been in operations since March of 2017. The primary objective of this passive remote sensing payload is to measure the vertical distribution of aerosol, ozone and other trace gases in the upper atmosphere. This measurement can be used to improve our understanding of the Earth’s ozone recovery and how climate change is affecting the stratosphere. Presented here are challenges of operating an optical Earth observation payload on the highly dynamic International Space Station platform during the extended mission phase of the SAGE III on ISS mission. SAGE III/ISS has continued to maintain its coverage of low and mid-latitude observations while working around the expansion of the ISS and the increase in visiting vehicles that has occurred over the past year. With the addition of the Multi-purpose Laboratory Module (MLM), the first expansion of ISS in over a decade, the SAGE III/ISS payload used its ability to measure contamination to determine how this would affect the optical components on our payload. The addition of the MLM also modified the yaw, pitch, and roll of the ISS which the SAGE III/ISS operations team have been able to use to our advantage as this has put the ISS in the optimal expected pitch range for SAGE III/ISS data acquisition. The SAGE III/ISS operations team will continue to work with the dynamic platform while striving to maintain the mission observation goals as the ISS moves into the new phase of its operational life. Highlights from the first 5-yrs of SAGE III/ISS observations are presented showcasing abrupt changes to the stratosphere by volcanic eruptions and extreme wildfires.

Jamie Nehrir↗

SAGE III/ISS Data Product Improvements

In 2024 the Stratospheric Aerosol and Gas Experiment on the International Space Station (SAGE III/ISS) entered its eighth year of operations. Using a CCD spectrometer to observe solar and lunar occultations through Earth’s limb, the mission has retrieved tens of thousands of vertical profiles for ozone, aerosol, water vapor, and nitrogen dioxide. Retrieval algorithms are constantly under development to enhance these products. The next product version will improve upon previous versions by addressing problems with the aerosol extinction spectrum and recovering hundreds of profiles impeded by the recent proliferation of sunspots. Users of SAGE III/ISS data can also expect improvements to uncertainty estimates and a continued expansion of ancillary products.

Robert Manion↗