Search NASA⌕ Search

Engineering topics

David M Le Vine

Publications and source records attributed to David M Le Vine.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

The Dielectric Constant at P-Band for Salinity from 0 to 150 pss

Measurements have been made at P-band (0.707 GHz) to construct a model for the dielectric constant of sea water and extend the model for the dielectric constant to high salinity (50-150 pss). The measurements are part of research to develop a model for the dielectric constant suitable for future wide-bandwidth remote sensing of salinity and for application to water bodies such as the Great Salt Lake with salinity significantly above that found in the open ocean. Measurements have been made at temperatures from 2 to 30 °C and salinity from 0 to 138 pss. The data have been fit to a Debye model for the dielectric constant with a single resonance as has been employed at L-band (1.413 GHz) where remote sensing of salinity is currently done. Comparison with contemporary models developed from data at L-band indicates that the L-band model and new P-band model do well at both frequencies for salinity less than 50 pss but at higher values of salinity the L-band models diverge from the data. The data has also been used to test at high salinity the mathematical relationship between salinity and conductivity which is the basis for the practical salinity scale (pss).

Dielectric Constant↗
NASA NTRS2022

The Fourth Stokes Parameter for Geolocation in Passive Microwave Remote Sensing from Space

Polarimetric microwave radiometers such as SMAP are capable of measuring the fourth Stokes parameter in brightness temperature over the Earth surface. The value of this parameter is normally small but exhibits sharp spikes when the scene includes large differences in emission from the surface, such occur at land/water boundaries. In this manuscript, it is shown that these spikes can be used to accurately locate coastlines with potential application to geolocation in passive microwave remote sensing from space. Examples are presented using the L-band radiometer on SMAP, first with theory using calculations with the SMAP antenna pattern and orbit and then with SMAP measurements of the fourth Stokes parameter over Madagascar. Using the SMAP data, the coastline is located with a standard deviation less than 2 km. The results are consistent with the conventional approach used for geolocation of the SMAP radiometer footprint.

Passive Microwave Remote Sensing↗
NASA NTRS2022

SMAP Calibration Using Cold Sky Observations

Cold Sky Calibration is an important tool in the calibration of the SMAP radiometer. It is used to assess the absolute calibration and its temporal drift. We will present the results of 7 years of cold sky observations and the latest improvements they provide to the analysis of the SMAP radiometer calibration performances.

Emmanuel P Dinnat↗
NASA NTRS2022

Measurement of SST and SSS Using Frequencies in the Range 0.3 – 2.0 GHz

Wide bandwidth radiometer systems that make measurements at multiple frequencies in the range 300 MHz to 2 GHz have been proposed to address parameters important for understanding issues in the cryosphere associated with climate change such as ice sheet thickness and temperature. It is also possible with such a system to retrieve sea surface salinity (SSS) which is important for understanding the impact of climate change on ocean circulation at high latitude. In contemporary sensors for retrieving SSS, such as SMOS and SMAP, sea surface temperature (SST), another parameter important for understanding ocean circulation and necessary in the retrieval of salinity, is treated as an ancillary parameter obtained from an independent source. However, both SSS and SST have peaks in sensitivity below 1 GHz; and it has been shown that measurements at multiple frequencies in this portion of the spectrum can take advantage of this peak in sensitivity to improve the accuracy of the retrieval of SSS. In this manuscript it will be shown that there is also the potential to retrieve SST and, in cold water, the possibility for improved accuracy over existing retrievals.

SST↗
NASA NTRS2022

Measurement of SST and SSS Using Frequencies in the Range 0.3–2.0 GHz

Wide bandwidth radiometer systems that make measurements at multiple frequencies in the range from 300 MHz to 2 GHz have been proposed to address parameters important for understanding issues in the cryosphere associated with climate change such as ice sheet thickness and temperature. It is also possible with such a system to retrieve sea surface salinity (SSS), which is important for understanding the impact of climate change on ocean circulation at high latitude. In contemporary sensors for retrieving SSS, such as on Soil Moisture and Ocean Salinity (SMOS) and Soil Moisture Active Passive (SMAP), sea surface temperature (SST), another parameter important for understanding ocean circulation and necessary in the retrieval of salinity, is treated as an ancillary parameter obtained from an independent source. However, both SSS and SST have peaks in sensitivity below 1 GHz; and it has been shown that measurements at multiple frequencies in this portion of the spectrum can take advantage of this peak in sensitivity to improve the accuracy of the retrieval of SSS. In this manuscript, it will be shown that there is also the potential to retrieve SST and, in cold water, the possibility for improved accuracy over existing retrievals.

Microwave remote sensing↗
NASA NTRS2021

Soil Moisture Active/Passive (SMAP) L-band Microwave Radiometer Post-Launch Calibration Revisit: Approach and Performance

The SMAP microwave radiometer is a fully-polarimetric L-band radiometer flown on the SMAP satellite in a 6 AM / 6 PM sun-synchronous orbit at 685-km altitude. After the SMAP L1B_TB data product version4was released in 2018, the radiometer has undergonefurther calibration and validation. The goal isto reducethe difference between antenna temperature (TA) ofascending and descending orbits during the eclipse, andto reduce the dips in the calibration drift over the Cold Sky (CS) during the eclipse seasons in 2017 and 2018. The post-launch calibration algorithmhas been revisitedby retrieving all of the calibration parameters simultaneouslywith two different options for thehot calibration source(theglobal ocean, or the radiometer internal reference load). The performance of the two options are compared here. Theoption with the radiometer internal reference load has been chosen by the SMAP science team for data release version 5. In addition, a correction offset is applied to the input signal to account for offsets during the early-mission stages with theSMAP SAR transmitter operating alongside the radiometer.

Jinzheng Peng↗
NASA NTRS2021

Soil Moisture Active/Passive (SMAP) L-Band Microwave Radiometer Post-Launch Calibration Revisit: Approach and Performance

The soil moisture active passive (SMAP) microwave radiometer is a fully-polarimetric L -band radiometer flown on the SMAP satellite in a 6 AM /6 PM sun-synchronous orbit at 685-km altitude. After the SMAP L1B_TB data product version 4 was released in 2018, the radiometer has undergone further calibration and validation. The goal is to reduce the difference between antenna temperature of ascending and descending orbits during the eclipse, and to reduce the dips in the calibration drift over the cold sky (CS) during the eclipse seasons in 2017 and 2018. The postlaunch calibration algorithm has been revisited by retrieving all of the calibration parameters simultaneously with two different options for the hot calibration source (the global ocean, or the radiometer internal reference load). The performance of the two options are compared here. The option with the radiometer internal reference load has been chosen by the SMAP science team for data release version 5. In addition, a correction offset is applied to the input signal to account for offsets during the early-mission stages with the SMAP synthetic aperture radar transmitter operating alongside the radiometer.

calibration↗
NASA NTRS2021

Sensitivity of Wide Bandwidth Radiometer for Remote Sensing of Ocean Salinity

Passive microwave remote sensing of sea surface salinity from space is currently being done with measurements in the 27 MHz wide spectral window at 1.413 GHz (L-band) protected for passive use. Modern L-band instruments, such as the radiometers on SMOS and Aquarius, have demonstrated the feasibility of monitoring surface salinity from space, and they have also demonstrated the need for better accuracy, especially in cold water. Proposals to improve accuracy have largely involved adding measurement at more frequencies. For example, adding lower frequencies to improve the sensitivity to salinity in cold water and adding higher frequencies to enable simultaneous retrieval of sea surface temperature which is needed in the retrieval of salinity. These strategies involve trade-offs, some obvious such as the effects of interference from anthropogenic sources of radio frequency radiation (RFI) when operating outside the protected band and the loss of spatial resolution at lower frequencies. But, some are more subtle and arise because of the dependence of the retrieval of salinity on other parameters of the ocean surface, in particular, water temperature and roughness (wind speed). The effect of these interdependencies on the potential accuracy of salinity remote sensing in the frequency range 0.3 – 3.0 GHz is examined here to gain insight into the potential for future wide bandwidth instruments for remote sensing of salinity and the optimization of their design. There is benefit including the low frequencies, especially for cold water, but a danger of increased error including frequencies above 1.5 - 2.0 GHz depending on temperature.

Microwave Remote Sensing↗
NASA NTRS2021

Microwave Radiometry at Frequencies from 500 to 1400 MHz: An Emerging Technology for Earth Observations

Microwave radiometry has provided valuable spaceborne observations of Earth's geophysical properties for decades. The recent SMOS, Aquarius, and SMAP satellites have demonstrated the value of measurements at 1400 MHz for observing surface soil moisture, sea surface salinity, sea ice thickness, soil freeze/thaw state, and other geophysical variables. However, the information obtained is limited by penetration through the subsurface at 1400 MHz and by a reduced sensitivity to surface salinity in cold or wind-roughened waters. Recent airborne experiments have shown the potential of brightness temperature measurements from 500–1400 MHz to address these limitations by enabling sensing of soil moisture and sea ice thickness to greater depths, sensing of temperature deep within ice sheets, improved sensing of sea salinity in cold waters, and enhanced sensitivity to soil moisture under vegetation canopies. However, the absence of significant spectrum reserved for passive microwave measurements in the 500–1400 MHz band requires both an opportunistic sensing strategy and systems for reducing the impact of radio-frequency interference. Here, we summarize the potential advantages and applications of 500–1400 MHz microwave radiometry for Earth observation and review recent experiments and demonstrations of these concepts. We also describe the remaining questions and challenges to be addressed in advancing to future spaceborne operation of this technology along with recommendations for future research activities.

Microwave radiometry↗
NASA NTRS2021

Microwave Radiometry at Frequencies From 500 to 1400 MHz: An Emerging Technology for Earth Observations

Microwave radiometry has provided valuable spaceborne observations of Earth's geophysical properties for decades. The recent SMOS, Aquarius, and SMAP satellites have demonstrated the value of measurements at 1400 MHz for observing surface soil moisture, sea surface salinity, sea ice thickness, soil freeze/thaw state, and other geophysical variables. However, the information obtained is limited by penetration through the subsurface at 1400 MHz and by a reduced sensitivity to surface salinity in cold or wind-roughened waters. Recent airborne experiments have shown the potential of brightness temperature measurements from 500–1400 MHz to address these limitations by enabling sensing of soil moisture and sea ice thickness to greater depths, sensing of temperature deep within ice sheets, improved sensing of sea salinity in cold waters, and enhanced sensitivity to soil moisture under vegetation canopies. However, the absence of significant spectrum reserved for passive microwave measurements in the 500–1400 MHz band requires both an opportunistic sensing strategy and systems for reducing the impact of radio-frequency interference. Here, we summarize the potential advantages and applications of 500–1400 MHz microwave radiometry for Earth observation and review recent experiments and demonstrations of these concepts. We also describe the remaining questions and challenges to be addressed in advancing to future spaceborne operation of this technology along with recommendations for future research activities.

microwave radiometry↗
NASA NTRS2021

Characteristics of the RFI Environment at L-band as Observed from SMAP

This manuscript presents some characteristics of RFI sources as they were observed by the SMAP L-band radiometer. Knowledge of the nature of RFI can help improve design of future detection algorithms. For example, observations with airborne instruments demonstrating the pulse-like nature of RFI in the protected L-band spectrum at 1.413 GHz (attributed to air-traffic control radar) informed the design of the Aquarius radiometer and its RFI detection algorithm. The experience of Aquarius and SMOS in space led to the advanced detection system on SMAP. The fully polarimetric SMAP radiometer with spectral and time domain processing, provides sophisticated detection but also the opportunity to look at the temporal and spectral characteristics of the L-band RFI globally. The examples and categorization presented are based on a global sample but over a limited time. They are not meant to be complete. Rather, they are intended to provide insight into the time-frequency characteristics of RFI with the goal that knowledge of the characteristics can help improve detection in future missions.

Yan Soldo↗
NASA NTRS2021

Seawater Debye Model Function at L-Band and Its Impact on Salinity Retrieval From Aquarius Satellite Data

A model function of seawater, which specifies the dielectric constant of seawater as a function of salinity, temperature, and frequency, is important for the retrieval of sea surface salinity using satellite data. In 2017, a model function has been developed based on measurement data at 1.4134 GHz using a third-order polynomial expression in salinity ( S ) and temperature ( T ). Although the model showed improvements in salinity retrieval, it had an inconsistent behavior between partitioned salinities. To improve the stability of the model, new dielectric measurements of seawater have been made recently over a broad range of salinities and temperatures to expand the data set used for developing the model function. The structure of the model function has been changed from a polynomial expansion in S and T to a physics-based model consisting of a Debye molecular resonance term plus a conductivity term. Each unknown parameter is expressed in S and T based on the expanded measurement data set. Physical arguments have been used to limit the number of unknown coefficients in these expressions to improve the stability of the model function. The new model function has been employed in the retrieval algorithm of the Aquarius satellite mission to obtain a global salinity map. The retrieved salinity using a different model function is compared with in situ data collected by Argo floats to evaluate the impact and the performance of model functions. The results indicate that the new model function has significant improvements in salinity retrieval compared with other existing models.

Seawater↗
NASA NTRS2017

Soil Moisture ActivePassive (SMAP) L-Band Microwave Radiometer Post-Launch Calibration

The SMAP microwave radiometer is a fully-polarimetric L-band radiometer flown on the SMAP satellite in a 6 AM/ 6 PM sun-synchronous orbit at 685 km altitude. Since April, 2015, the radiometer is under calibration and validation to assess the quality of the radiometer L1B data product. Calibration methods including the SMAP L1B TA2TB (from Antenna Temperature (TA) to the Earth’s surface Brightness Temperature (TB)) algorithm and TA forward models are outlined, and validation approaches to calibration stability/quality are described in this paper including future work. Results show that the current radiometer L1B data satisfies its requirements.

radiometers↗
NASA NTRS1986

Review of measurements of the RF spectrum of radiation from lightning

A review is presented of the measurements reported in the literature of the spectrum of electromagnetic radiation from lightning in the frequency range from 1 kHz to 1 GHz. Measurements have been made either by monitoring the power received at individual frequencies using a narrow bandwidth recording device tuned to the frequencies under investigation or by recording the transient (time dependent) radiation with a wide bandwidth device and then Fourier transforming the waveform to obtain a spectrum. Measurements of the first type were made extensively in the 1950’s and 1960’s and several composite spectra have been deduced by normalizing the data of different investigators to common units of bandwidth and distance. The composite spectra tend to peak near 5 kHz and then decrease roughly as (frequency).’ upto nearly 100 MHz where scatter in the data make the behaviour uncertain. Measurements of the second type have been reported for return strokes, the stepped leader and for some intracloud processes. The spectrum of first return strokes obtained in this manner is very similar to the composite spectra obtained from the narrowband measurements.

Lightning Spectrum↗
NASA NTRS1984

The radar cross section of dielectric disks

A solution is presented for the backscatter (monostatic) radar cross section of dielectric disks of arbitrary shape, thickness, and dielectric constant. The result is obtained by employing a Kirchhoff-type approximation to obtain the fields inside the disk. The internal fields induce polarization and conduction currents from which the scattered fields and the radar cross section can be computed. The solution for the radar cross section obtained in this manner will be shown to agree with known results in the special cases of normal incidence, thin disks, and perfect conductivity. It will also be shown that the solution can be written as a product of the reflection coefficient of an identically oriented slab times the physical optics solution for the backscatter cross section of a perfectly conducting disk of the same shape. This result follows directly from the Kirchhoff-type approximation without additional assumptions.

Radar cross section↗
NASA NTRS1977

The temporal structure of HF and VHF radiations during Florida lightning return strokes

Measurements have been made of the HF and VHF radiation at 3, 30, 139, and 295 MHz produced during lightning return strokes, in correlation with wideband electric field measurements covering from about 300 Hz to 2 MHz. Intense pulses of RF are observed during the first return stroke in a discharge to ground, but with a 10-30 µsec time delay between the beginning of the stroke and the occurrence of significant RF radiation. The delay occurs at all frequencies and is short enough to suggest that the main channel and/or branches are the main initial sources of RF during the first stroke. During a subsequent return stroke, the RF starts an average of 265 µsec prior to the onset of the stroke. At 139 and 295 MHz, the subsequent stroke RF lasts only about 115 µsec; however, at 3 MHz, the radiation frequently persists up to and during the stroke.

David M Le Vine↗
NASA NTRS1976

The scattering of obliquely incident plane waves from a corrugated conducting surface

A physical optics solution is presented for the scattering of plane waves from a perfectly conducting corrugated surface in the case of waves incident from an arbitrary direction and for an observer far from the surface. This solution is used to compute the radar cross section of the surface in the case of backscatter from irregular (i.e., stochastic) corrugations. An interesting feature of the solution is the occurrence of singularities in the scattered fields. These singularities appear to be a manifestation of focusing by the surface at its 'stationary' points. Whether or not the singularities occur in the solution depends on the manner in which one restricts the analysis to the far-field.

Surface waves↗