Search NASA⌕ Search

Engineering topics

David Pike

Publications and source records attributed to David Pike.

10 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Energy Augmentation for Vehicle Electric Systems (EAVES)

This preliminary study evaluated eight concepts for augmenting the energy state of electric Vertical Take-Off and Landing vehicles. Advanced Air Mobility electric vehicles could need additional charge due to depleted batteries (e.g., strong winds along the way) while approaching their destination. There are five direct charging and three indirect charging concepts presented in this paper. The concepts are in the preliminary research stage and are being refined. Considering the concepts are for the year 2045 timeframe, there is sufficient time to evolve them, along with the designs of these electric air vehicles. This Technical Memorandum describes more detail and provides a discussion on the desirability, viability, feasibility, and wickedness of these energy augmentation concepts. A discussion of barriers and initial investigation approach for the concepts is presented as well. One intent for the presentation of this Technical Memorandum is to capture the work done from March through September 2022 within NASA’s Convergent Aeronautics Solutions (CAS) Project, in the Transformative Aeronautics Concepts Program. At the end of the effort, it was decided that only one concept would be further investigated. The rest of the concepts for energy augmentation would be described in this document and could be picked up later if NASA chose to further investigate them. This document is a collection of input from the authors regarding the concepts they worked on. It is not intended to be a conference or journal publication, but a record of research conducted on the concepts considered by the Energy Augmentation for Vehicle Electric Systems (EAVES) team consisting of the authors. Mr. Todd Stinchfield was the Principal Investigator.

Kapil Sheth↗
NASA NTRS2023

Energy Augmentation Concepts for Advanced Airspace Mobility Vehicles

This introductory paper describes several concepts that could be used for augmenting the energy state of electric Vertical Take-Off and Landing (eVTOL) vehicles. Advanced Air Mobility (AAM) electric vehicles, just like conventional vehicles, could need additional charge due to depleted batteries (e.g., strong winds along the way) while approaching their destination. There are three indirect charging and five direct charging concepts presented in this paper. The concepts are in preliminary research stage and are being refined. Considering the concepts are for the year 2045 timeframe, there is sufficient time to evolve them, along with the designs of the AAM vehicles. The paper describes more details and discussion on the desirability, viability, and feasibility of these energy augmentation concepts. A discussion of barriers and initial investigation approach for three concepts is presented.

AAM vehicles↗
NASA NTRS2023

Energy Augmentation Concepts for Advanced Airspace Mobility Vehicles

This introductory paper describes several concepts that could be used for augmenting the energy state of electric Vertical Take-Off and Landing (eVTOL) vehicles. Advanced Air Mobility (AAM) electric vehicles, just like conventional vehicles, could need additional charge due to depleted batteries (e.g., strong winds along the way) while approaching their destination. There are three indirect charging and five direct charging concepts presented in this paper. The concepts are in preliminary research stage and are being refined. Considering the concepts are for the year 2045 timeframe, there is sufficient time to evolve them, along with the designs of the AAM vehicles. The paper describes more details and discussion on the desirability, viability, and feasibility of these energy augmentation concepts. A discussion of barriers and initial investigation approach for three concepts is presented.

AAM vehicles↗
NASA NTRSDate not supplied

Lunar Power Transmission for Fission Surface Power

This work reviews key considerations and challenges in the implementation of lunar power transmission for the 40 kW Fission Surface Power (FSP) System. The overall FSP electric power flow is presented, and potential bulk power transmission strategies are discussed. Metallic conductors operating at elevated voltage are identified as the most efficient and feasible solution, and hardware implementation challenges for AC and DC voltage step up/down are discussed. This work is intended to drive progress on identifying the most feasible power transmission strategy for landed fission power and does not represent consensus or preference by NASA regarding a particular course of action.

Lunar↗
NASA NTRSDate not supplied

Lunar Power Transmission for Fission Surface Power

This work reviews key considerations and challenges in the implementation of lunar power transmission for the 40 kW Fission Surface Power (FSP) System. The overall FSP electric power flow is presented, and potential bulk power transmission strategies are discussed. Metallic conductors operate at elevated voltage are identified as the most efficient and feasible solution, and hardware implementation challenges for AC and DC voltage boost are discussed. This work is intended to drive progress on identifying the most feasible power transmission strategy for landed fission power and does not represent consensus or preference by NASA regarding a particular course of action

Lunar↗
NASA NTRSDate not supplied

A Concept of Operations for Power Beaming of Electric Air Vehicles

A concept of operations is presented for power beaming of microwaves to extend battery charge of an electric air vehicle. Critical aspects of airspace operations and power beam charging are addressed. Three classes of electric Vertical Take-Off and Landing vehicle models are considered for recharging. The effects of transmitter frequency, antenna size, and beam width are analyzed. Based on past experiments in the industry, a 2.5 kW power beam is selected. A no-drag rectifying antenna under the belly of the vehicle is selected along with the conversion efficiency, power density, and its size. The combined efficiency of the transmit/receive system as well as the beam containment values are addressed. These parameters are chosen to assess viability and feasibility of the energy augmentation method to establish safety for humans on-board from exposure to the transmitted energy. NASA will test the concept of operations in a laboratory experiment with parameters selected and presented in this paper.

eVTOL vehicles↗
NASA NTRSDate not supplied

A Modular AC to DC Interface Converter to Enable Lunar Surface Power Transmission

NASA is developing technology to enable sustained operations on extraterrestrial planetary bodies such as the Moon and Mars. One fundamentally enabling technology is long-distance electrical power transmission. This paper describes the Universal Modular Interface Converter (UMIC), which connects 120 VDC space power equipment to a 3 kVAC grid, and is intended to enable kilometer-distance transmission of 1s to 10s of kW of electrical power to support Artemis and future lunar missions. Specifically, this paper describes the technology within the UMIC product, its electrical power interfaces, and the state of its development. It also describes initial hardware and simulation test results of the UMIC.

Planetary surface power↗
NASA NTRSDate not supplied

A Concept of Operations for Power Beaming of Electric Air Vehicles

A concept of operations is presented for power beaming of microwaves to extend battery charge of an electric air vehicle. Critical aspects of airspace operations and power beam charging are addressed. Three classes of electric Vertical Take-Off and Landing vehicle models are considered for recharging. The effects of transmitter frequency, antenna size, and beam width are analyzed. Based on past experiments in the industry, a 2.5 kW power beam is selected. A no-drag rectifying antenna under the belly of the vehicle is selected along with the conversion efficiency, power density, and its size. The combined efficiency of the transmit/receive system as well as the beam containment values are addressed. These parameters are chosen to assess viability and feasibility of the energy augmentation method to establish safety for humans on-board from exposure to the transmitted energy. NASA will test the concept of operations in a laboratory experiment with parameters selected and presented here.

eVTOL vehicles↗