Engineering topics
Publications and source records attributed to David Rigby.
This manual is intended to provide the information necessary for an applications engineer to configure, compile, and execute the GlennICE software. The intent of this document is not to detail the algorithms of the software. The intent of this document is to detail how a user can interact and configure the algorithms of this software in order to produce a desired simulation.
GlennICE (Glenn Icing Computational Environment) is a computational tool designed to calculate ice growth on complex three-dimensional geometries using the input from a user-supplied computational fluid dynamics (CFD) solution for the geometry of interest. The NASA John H. Glenn Research Center at Lewis Field is developing this tool to aid those evaluating, designing and certifying aircraft, engines, and aircraft components for flight in icing conditions. This domestically available software is being developed to enable the introduction of new icing physics into a computational environment in a manner that is open for evaluation and eventual use by industry, academia, and other government organizations.
Computational tools have been increasing in maturity and are thus commonly used in the engineering design process. Advancements in NASA’s current state of the art computational ice accretion tool are required to tackle the icing challenges of tomorrow. GlennICE, a next generation ice accretion solver, is under development at NASA to tackle these challenges. One of the elements of this migration is transitioning from a quasi-three dimensional strip theory based ice accretion methodology to a fully three dimensional methodology. This requires construction of a method to redefine or extrude a discretized or tessellated surface geometry based on the predicted volumetric ice growth for each tessellated surface triangle. This paper describes the methodology that is employed in the GlennICE software, and assesses the performance of the method in replicating a well definied analytical test case.
Computational methods for ice accretion can simulate the impact of water drops and ice crystals on an aircraft surface in a Lagrangian reference frame or in the Eulerian reference frame. In the Eulerian reference frame, particles are considered a continuous fluid while in the Lagrangian frame individual particle trajectories are calculated. Methods that use the Eulerian reference frame are typically easier to develop as established modules used for continuum mechanics can be leveraged. The Eulerian systems can also be faster since the user does not have to simulate millions of particles in order to achieve good results. It is imperative therefore that a Lagrangian method optimize the release points of trajectories such that accurate solutions can be obtained while minimizing as much as possible the number of trajectories computed. This paper will present a methodology for this refinement process and demonstrate its effectiveness on sample three dimensional test cases.
This presentation documents results from the LEWICE2D and GlennICE computer codes for the 1st AIAA Ice Prediction Workshop. The results include ice shape comparisons between the code predictions with experimental ice shapes for a limited number of configurations and conditions. The intent of this workshop is to establish a sound baseline of the current capabilities and use this baseline to target the best topics for follow-on workshops.
GlennICE (Glenn Icing Computational Environment) is a computational tool designed to calculate ice growth on complex three-dimensional geometries using the input from a user-supplied computational fluid dynamics (CFD) solution for the geometry of interest. The NASA John H. Glenn Research Center at Lewis Field is developing this tool to aid those evaluating, designing and certifying aircraft, engines, and aircraft components for flight in icing conditions. This domestically available software is being developed to enable the introduction of new icing physics into a computational environment in a manner that is open for evaluation and eventual use by industry, academia, and other government organizations. This paper will document the current capabilities for version 2.1 of this software and provide example cases with comparison to available experimental data.
Explore the source record for details and available documents.
Accurate modeling of coolant airflows, which form protective films over turbine blades, is essential for designing fuel-efficient and environmentally sustainable gas turbine engines. Excessive coolant reduces thermal efficiency, while insufficient coolant leads to blade overheating and causes damage. Therefore, precise prediction of flow field interactions with cooling air is critical for optimizing turbine performance. This study numerically investigates the cooling effectiveness of purge and film cooling flows within a high-pressure turbine (HPT) rotor using Large Eddy Simulation (LES). The study utilizes NASA Glenn Research Center’s Glenn-HT solver. The simulation models ethe conditions of the Penn State University START rotating rig. A high-fidelity structured mesh comprising up to 800 million cells is employed to resolve high-Reynolds number flow (Re ≈ 350,000) and to capture intricate secondary flow structures, including tip leakage and purge-induced vortices. Film cooling effectiveness computations are highly sensitive to boundary conditions at the cooling holes and to grid resolution. Even with well-resolved grids and included plena, strong mixing challenges traditional eddy viscosity models. To address this, a simplified configuration is simulated: a truncated row of shaped holes on the suction side near the leading edge and a row on the pressure side, both fed from internal plena while the purge slot and tip clearance are also modeled. Two isothermal LES cases are conducted at two distinct wall temperatures, which yield the adiabatic wall temperature and the heat transfer coefficient. The definition and means of computation of the effectiveness is discussed in this paper. The simulations reveal detailed three-dimensional unsteady flow features, including coherent vortical structures and secondary flows originating from the purge cavity. Film cooling effectiveness and Nusselt number distributions are presented for both the blade surface and tip, highlighting regions of elevated heat transfer and complex thermal behavior. These findings underscore the importance of high-resolution LES and realistic boundary conditions in capturing the dynamics of purge and film cooling, offering valuable insights for improving turbine blade design and thermal management strategies.