Engineering topics

Davila, P. M.

Publications and source records attributed to Davila, P. M..

3 records

NASA NTRS1990

Optical design of Lyman/FUSE

The optical system for the proposed Lyman/Far UV Spectroscopic Explorer (FUSE) orbiting observatory is described and illustrated with drawings and graphs of predicted performance. The system comprises (1) an FUV channel based on a 1.84-m-diameter Rowland circle spectrograph with five high-density modified ellipsiodal near-normal-incidence gratings and an array of four MAMA detectors; (2) an EUV channel with ellipsoidal mirror, planar varied-line-space grating, microchannel-plate array, and wedge-and-strip anode detector; (3) a 70-cm Wolter II glancing-incidence telescope; and (4) a CCD-detector fine-error sensor to provide accurate pointing (within 200 marcsec rms). The resolving powers of the spectrographs are 30,000 in the FUV and 300-600 (wavelength-dependent) in the EUV.

Content, D. A.↗

NASA NTRS1986

Telescope technology for the Far Ultraviolet Spectroscopic Explorer (FUSE)

Preliminary engineering studies are in progress to define a telescope for FUSE. General science objectives include high resolution spectroscopy in the 900-1200 A spectral region, low or moderate resolution spectroscopy in the 100-900 A range, and long slit imaging over a 1-arcmin field at a spatial resolution of 1 arcsec. Telescope design studies indicate that a 1-m-diameter Wolter-Schwarzschild type II glancing-incidence telescope with an effective collecting area of 3000 sq cm is required to meet the primary science objectives. A baseline optical design has been completed, and initial alignment sensitivities derived to begin the process of error allocation for the entire system.

Osantowski, J. F.↗

NASA NTRS1984

Glancing incidence EUV telescopes - Analysis and comparison

Steps in the derivation of generalized surface equations describing either a Wolter or Wolter-Schwarzschild type II extreme ultraviolet telescope are outlined. These surface equations are incorporated in an optical design program where first-order design parameters are varied to produce a number of different series of type II telescopes. These series are then ray traced to compare and analyze the geometric image quality for different designs in terms of minimum rms angular blur and field curvature. Results of an analysis illustrating the dependence of effective area on first-order design parameters are also presented. The differences and similarities between equivalent Wolter and Wolter-Schwarzschild designs are discussed.

Davila, P. M.↗