Exploring Oxadiazole Derivative as Anolytes for >3 V Non-Aqueous Redox Flow Battery
Explore the source record for details and available documents.
Jesse, Kate Ashley↗
Engineering topics
Davis, Benjamin L.
Publications and source records attributed to Davis, Benjamin L..
Oxadiazole derivatives as stable anolytes for >3 V non-aqueous redox flow battery
Effective utilization of energy from renewable sources such as wind and solar requires the development of long duration energy storage (LDES) systems that can accommodate intermittent energy accrual. One option under investigation is the use of a redox flow battery (RFB). A significant amount of work has explored aqueous RFB systems with a variety of inorganic and organic carriers. However, moving to a nonaqueous solvent such as acetonitrile (MeCN) for RFB provides a much larger electrochemical window, which could lead to increased energy density if properly utilized. Here, in this work, we investigate a series of 2,5-diphenyl-1,3,4-oxadiazole (DiPhenOx) derivatives as anolytes for a redox flow battery. DiPhenOx has a low voltage redox event that, while reversible by cyclic voltammetry, was determined to be irreversible during bulk electrolysis. To improve cycling performance, we introduced various ester and cyano groups to the phenyl rings of DiPhenOx using molecular engineering. We characterized these derivatives spectroscopically and electrochemically to assess their feasibility for flow battery applications. The ester derivatives with the best cycling performance were tested in a flow cell vs. ferrocene, 2,5-di-tert-butyl-1,4-bis(2-methoxyethoxy)benzene (DBBB) and thianthrene, which resulted in ~2 V, ~3 V and ~3 V redox flow batteries, respectively.
25 ENERGY STORAGE↗
Impacts of caking on corn stover – An assessment of moisture content and consolidating pressure
Caking or time consolidation of powders is a serious problem which can hinder productivity and overall feasibility of various industrial processes. Here this study focuses on the impacts moisture content and consolidating pressures can have on 2 mm corn stover samples after undergoing a drying treatment at different times. Individually, moisture content and consolidating pressure did not exhibit any significant changes throughout the modified variable flow rate tests using the FT4 powder rheometer. However, applying both variables simultaneously yielded higher-than-usual energy outputs from the corn stover, indicative of biomass agglomeration due to the moisture and its subsequent evaporation while under pressure via the induced consolidating pressure. However, despite the increase in energy usage, time dried did not have a direct effect and demonstrated no trend.
36 MATERIALS SCIENCE↗
Impact of Pendent Ammonium Groups on Solubility and Cycling Charge Carrier Performance in Nonaqueous Redox Flow Batteries
The synthesis, characterization, electrochemical performance, and theoretical modeling of two base-metal charge carrier complexes incorporating a pendent quaternary ammonium group, [Ni(bppn-Me3)][BF4], 3′, and [Fe(PyTRENMe)][OTf]3, 4’, are described. Both complexes were produced in high yield and fully characterized using NMR, IR, and UV–vis spectroscopies as well as elemental analysis and single-crystal X-ray crystallography. The solubility of 3′ in acetonitrile showed a 283% improvement over its neutral precursor, whereas the solubility of complex 4’ was effectively unchanged. Cyclic voltammetry indicates an ∼0.1 V positive shift for all waves, with some changes in reversibility depending on the wave. Bulk electrochemical cycling demonstrates that both 3′ and 4’ can utilize the second more negative wave to a degree, whereas 4’ ceases to have a reversible positive wave. Flow cell testing of 3′ and 4’ with Fc as the posolyte reveals little improvement to the cycling performance of 3′ compared with its parent complex, whereas 4’ exhibits reductions in capacity decay when cycling either negative wave. Postcycling CVs indicate that crossover is the likely source of capacity loss in complexes 3, 3′, and 4’ because there is little change in the CV trace. Density functional theory calculations indicate that the ammonium group lowers the HOMO energy in 3′ and 4’, which may impart stability to cycling negative waves while making positive waves less accessible. The incorporation of a positively charged species can improve solubility, stored electron density, and capacity decay depending on the complex, features critical to high energy density redox flow battery performance.
25 ENERGY STORAGE↗
Sterically Bulky Asymmetric Benzophenone Derivatives as Negolytes in a Non-Aqueous Redox Flow Battery
Explore the source record for details and available documents.
Jesse, Kate Ashley↗
Thermal Characterization of Acid Treated Anion Exchange Resins
Anion exchange is a chemical separation and purification technique in which a solid phase ion exchanging material (i.e., anion exchange resin beads) interchanges its anions with the desired anions from a solution phase. Typical anion exchange resins (e.g., Bio-Rad AG 1-X8 strongly basic anion exchange resin) consist of a polymer resin bead of cross-linked polystyrene with quaternary ammonium functional groups (Figure 1). Anion exchange occurs at the resin functional groups by exchange of the counter ion of the quaternary ammonium (typically chloride or nitrate) for the anionic species of interest. Other resin polymers have been developed—such as cross-linked vinylpyridine/divinylbenzene utilized in Reillex HPQ anion exchange resin—to improve the resins’ resistance against degradation by oxidizing agents, strong acids, and radiation. Anion exchange is performed for the separation of transuranic (TRU) elements throughout the Department of Energy complex. At the Los Alamos National Laboratory (LANL), production scale quantities of these resins are handled at the Chemistry and Metallurgy Research Facility, the Plutonium Facility, and the Transuranic Waste Facility. Spent anion exchange resin will eventually be disposed of as TRU waste. This has prompted concerns regarding its safe disposal under potential hazard scenarios, in particular a thermal excursion of a TRU waste drum. There is a concern that a potential thermal excursion of a TRU waste drum containing anion exchange resin previously contacted with nitric acid may result in energetic side reactions and pressure buildup due to resin degradation by nitric acid and heat. Therefore, the objective of the experiments described in this report was to gather qualitative and quantitative data to support decisions regarding the thermal stability and safe disposal strategy of nitric acid treated anion exchange resins utilized in TRU processing operations.
12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
Redox flow battery carrier molecule
A nonaqueous electrolyte composition for use in a redox flow battery system, comprising: a nonaqueous supporting electrolyte; and a metal ligand complex of formula II, wherein R 1 , R 2 , R 3 , R 4 and R 6 are each independently H, halogen, alkyl, substituted alkyl, alkoxy, substituted alkoxy, aryloxy, substituted aryloxy, heteroaryloxy, substituted heteroaryloxy, or a polyether, wherein R 5 is H, alkyl, or substituted alkyl; and M is a transition metal or zinc.
25 ENERGY STORAGE↗
Phosphoric acid pre-treatment to tailor polybenzimidazole membranes for vanadium redox flow batteries
We repot vanadium redox flow batteries (VRFBs) use ion-selective membranes for transporting ionic species while separating the positive and negative electrolytes. In this paper, we report phosphoric acid doped polybenzimidazole (PBI) membranes that yield high ionic selectivity and conductivity in VRFBs. The phosphoric acid pre-treatment swells the PBI matrix irreversibly and increases its sulfuric acid doping in VRFB electrolytes. The pre-treated membranes show comparable area resistance with Nafion-212 with better selectivity towards vanadium ions. A low resistance was obtained with a reduced membrane thickness, which can reduce the overall cost of materials. The VRFB using an optimized phosphoric acid pre-treated PBI membrane demonstrates coulombic, voltage, and energy efficiencies of 99.7, 90.3, and 90.0%, respectively, at 40 mA cm -2 while achieving ~40% higher discharge capacity compared to Nafion-212. Furthermore, the VRFB cell shows excellent cycling stability, i.e., only 6.8% or 0.068% per cycle capacity decay for 100 cycles while maintaining coulombic efficiency at >99.9% (98.5% coulombic efficiency for Nafion-212 with a capacity decay of 0.42% per cycle) proving the effectiveness of pre-treatment of phosphoric acid on PBI membranes.
36 MATERIALS SCIENCE↗