Search NASASearch

Engineering topics

Davis, P. A.

Publications and source records attributed to Davis, P. A..

At least 19 records

Topography of closed depressions, scarps, and grabens in the north Tharsis region of Mars: Implications for shallow crustal discontinuities and Graben formation

Using Viking Orbiter images, detailed photoclinometric profiles were obtained across 10 irregular depressions, 32 fretted fractures, 40 troughs and pits, 124 solitary scarps, and 370 simple grabens in the north Tharsis region of Mars. These data allow inferences to be made on the shallow crustal structure of this region. The frequency modes of measured scarp heights correspond with previous general thickness estimates of the heavily cratered and rigded plains units. The depths of the flat-floored irregular depressions (55-175 m), fretted fractures (85-890 m), and troughs and pits (60-1620 m) are also similar to scarp heights (thicknesses) of the geologic units in which these depressions occur, which suggests that the depths of these flat-floored features were controlled by erosional base levels created by lithologic contacts. Although the features have a similar age, both their depths and their observed local structural control increase in the order listed above, which suggests that the more advanced stages of associated fracturing facilitated the development of these depressions by increasing permeability. If a ground-ice zone is a factor in development of these features, as has been suggested, our observation that the depths of these features decrease with increasing latitude suggests that either the thickness of the ground-ice zone does not increase poleward or the depths of the depressions were controlled by the top of the ground-ice zone whose depth may decrease with latitude.

Davis, P. A.

Small volcanoes in Tempe Terra, Mars: Their detailed morphometry and inferred geologic significance

The Tempe Terra province contains a variety of volcanic landforms that range in size from small vents (less than 10 km in diameter) to moderately sized volcanoes (150 km in diameter). The volcanoes are aligned along the dominant northerly and northeasterly trends of the faults in this region, and many of the volcanoes occur on grabens. Some workers have speculated on the nature of some of the volcanoes on the basis of their general morphology, shadow measurement height, lateral dimension, and geologic setting. As part of a larger study, we have obtained detailed photoclinometric profiles across five of the more conspicuous small volcanoes in the Tempe Terra region. For these data, we extracted for each volcano its flank width and edifice height and the width and depth of its summit crater. We statistically compared these dimensions for each volcano with a set of average dimensions for each type of terrestrial volcanic feature listed in Pike and Clow (1981). These comparisons indicate that the morphometries of the Martian volcanoes 1, 2, and 3 most closely match Earth's cratered basaltic lava shields, and the morphometries of volcanoes 4 and 5 are similar to those of terrestrial basaltic tuff rings.

Davis, P. A.

Shallow crustal discontinuities and graben and scarp formation in the Tharsis region of Mars

We recently obtained photoclinometric profiles across all simple grabens and erosional landforms (e.g., troughs, pits, wall-valley heads, and scarps that are bounded above and below by flat surfaces) that occur within Tempe Terra. These data, together with similar data that we obtained for Syria, Sinai, and Lunae Plana and the Alba Patera region, allow regional examination of shallow crust Al discontinuities between latitude 30 deg. S and 50 deg. N and longitude 50 deg. W and 112 deg. W. The profile for each simple graben was used with an appropriate structural model to estimate the depth to the base of the faulted layer. The depths of erosional wall scarps may also indicate the depths of mechanical discontinuities such as a local lithologic or cryospheric boundary. Examination of these data indicates a surprisingly consistent set of shallow crust Al discontinuities for the Tharsis region at depths of 0.4-0.6 km, 1.0-1.4 km, and 2 km; the maximum depth of the features in most study areas appears to be about 4 km. The concentration of values between 0.4 and 0.6 km in most scarp and some faulted-layer depth data is similar to the range in estimated thicknesses of individual exposed Noachian and Hesperian plains units in the Tharsis region. The regional depth data also show two modes near 1 and 2 km in some study areas and a maximum depth near 4 km in most study areas; the faulted-layer depths in excess of 4 km at Alba Patera occur near the summit of the caldera and could be attributed to volcanic loading. Our detailed examination of these depth data includes the following observations: (1) The mode at 1.0-1.4 km depth transcends age and geologic setting in this broad study area; (2) The 2-km mode is most obvious at Alba Patera and moderately well developed at Syria and Sinai Plana, but it is muted at Tempe Terra, which is in the same latitude range as Alba Patera but older; and (3) The 2-km-depth mode is not present in all areas that have features of Amazonian age. We suggest two possible explanations for our observations in the Tharsis region.

Davis, P. A.

Interactions of tectonic, igneous, and hydraulic processes in the North Tharsis Region of Mars

Recent work on the north Tharsis of Mars has revealed a complex geologic history involving volcanism, tectonism, flooding, and mass wasting. Our detailed photogeologic analysis of this region found many previously unreported volcanic vents, volcaniclastic flows, irregular cracks, and minor pit chains; additional evidence that volcanic tectonic processes dominated this region throughout Martian geologic time; and the local involvement of these processes with surface and near surface water. Also, photoclinometric profiles were obtained within the region of troughs, simple grabens, and pit chains, as well as average spacings of pits along pit chains. These data were used together with techniques to estimate depths of crustal mechanical discontinuities that may have controlled the development of these features. In turn, such discontinuities may be controlled by stratigraphy, presence of water or ice, or chemical cementation.

Davis, P. A.

Rheological analyses of lava flows on Mars

Researchers obtained 183 profiles of lava flows on Mars using photoclinometry. These photoclinometric profiles were leveled by adjusting them until the levee crests or bases had the same elevations (depending on the situation). Here, researchers report some of the results of their analysis of 27 flows on the flanks of Alba Patera (3 flows), near the summit of Ascraeus Mons (6 flows), the flanks of Arsia Mons (3 flows), and the flanks of Olympus Mons (15 flows). Results suggest that the flows examined to date are not felsic or ultramafic; rather, they probably range from basalts to basaltic andesites. Thus, the suggestion that flows on Olympus Mons and elsewhere may be more silicic than Hawaiian basalts is supported by the researchers' results. These suggestions are testable with suitable measurements of silica contents of the flows.

Moore, H. J.

Have graben wall scarps accumulated sand and dust on Mars?

Grabens are linear fault bounded troughs that are extremely abundant on Mars (about 7000 cover the Western Hemisphere). Analysis of lunar and Martian grabens as well as analogous structures on Earth indicates that grabens form under extension when the crust is pulled apart. On Mars, topographic maps are not of sufficient resolution to measure graben wall slopes. Seismic shaking on Mars might be capable of reducing 60 deg fault scarps to an angle of repose. Some other process must be responsible for further reducing graben wall slopes. If the deposition of sand and dust along graben walls is responsible for their extremely low slopes, then a variety of implications are possible. Sand and/or dust movement and deposition is ubiquitous in grabens over most of Mars, as similar looking grabens are found over the entire Western Hemisphere and this requires a plentiful supply of sand or dust. If the material that accumulates is of low density and cohesion, attempts to traverse graben walls might be difficult. Rimless shallow depressions could be more effective sinks for sand and dust on Mars than has been realized.

Golombek, M. P.

Martian terrains

Terrain studies of candidate landing sites for a future rover/sample-return mission to Mars are being conducted to evaluate the geologic and trafficability aspects of each site. An optimum site should have geologic units of widely diverse ages and chemical compositions occurring in close enough proximity and in smooth enough terrain so that a roving vehicle of limited traverse ability (+ or - 100 km) could collect representative samples. In FY 1986, geologic maps were compiled at 1:500,000 and 1:2 million scales of the Mangala Valles, Kasei Valles, Chasma Boreale (north polar), and Planum Australe (south polar) areas, and a study was begun of the topography and surface roughness characteristics of the Mangala Valles site. Geologic mapping has been greatly facilitated by specially enhanced, high-resolution Viking photographs, which clarify stratigraphic relations of units unrecognized earlier. Photoclinometric profiles of topographic features provide width and depth measurements of four classes of channels, the thickness of some volcanic units, and the throw on some faults. Estimates of the surface roughness of units are calculated using a newly developed USGS computer program and using measurements derived from Earth-based radar.

Masursky, Harold

Global radar units on Venus derived from statistical analysis of Pioneer Venus Orbiter radar data

The classification of surface radar units on Venus using an unsupervised cluster analysis of Pioneer Venus radar reflectivity and root-mean-square (rms)-slope data is described. The advantages of the unsupervised analysis are discussed. F tests are utilized to evaluate the numerical significance of the clusters. The derived rms-slope data and reflectivity for 15 radar units are presented. The relations between radar data bases and elevation are studied. The lowlands, rolling plains, highlands, and mountainous surface of Venus are examined. The geology of Venus landing sites and radar properties, and the surface radar reflectivity images and earth-based images are compared. The spatial relations between classification units are calculated. It is concluded that the unsupervised analysis data correlate well with Head et al. (1985b) data and produce more detailed classification images.

Davis, P. A.

Aircraft Landing Dynamics Facility - A unique facility with new capabilities

The Aircraft Landing Dynamics Facility (ALDF), formerly called the Landing Loads Track, is described. The paper gives a historical overview of the original NASA Langley Research Center Landing Loads Track and discusses the unique features of this national test facility. Comparisons are made between the original track characteristics and the new capabilities of the Aircraft Landing Dynamics Facility following the recently completed facility update. Details of the new propulsion and arresting gear systems are presented along with the novel features of the new high-speed carriage. The data acquisition system is described and the paper concludes with a review of future test programs.

Davis, P. A.

Dynamic Calibration of Pressure Transducers

Sinusoidal calibration signal produced in 4- to 100-Hz range. Portable oscillating-pressure device measures dynamic characteristics of pressure transducers installed in models or aircraft at frequency and oscillating-pressure ranges encountered during unsteady-pressure-measurement tests. Calibration is over range of frequencies and amplitudes not available with commercial acoustic calibration devices.

Hess, R. W.

Unsupervised Classification of Global Radar Units on Venus

Characterization of the Venusian surface in terms of its radar properties was accomplished by application of an unsupervised, linear discriminant algorithm to two Pioneer-Venus (PV) Orbiter radar data sets: the RMS-slope (surface roughness) and reflectivity. Both databases were spatially filtered to the same effective resolution of 100 km prior to classification. A recent supervised classification study using these data was based on presupposed morphologic significance of selected data ranges. The knowledge of both Venusian geology and the geologic significance of the radar data is so limited that the data warrant a more unsupervised approach; for this study a linear discriminant classifier was chosen. This approach is purely statistical, thereby removing any observer bias. Statistical significance of the resulting clusters was evaluated by an ancillary program in which an F test utilizing the Mahalanobis' distance.

Kozak, R. C.

High frequency dynamic pressure calibration technique

A high frequency dynamic calibration technique for pressure transducers has been developed using a siren pressure generator (SPG). The SPG is an inlet-area-modulated device generating oscillating waveforms with dynamic pressure amplitudes up to 58.6 kPa (8.5 psi) in a frequency range of 1 to 10 kHz. A description of the generator, its operating characteristics and instrumentation used for pressure amplitude and frequency measurements is given. Waveform oscillographs and spectral analysis of the pressure transducers' output signals are presented.

Davis, P. A.

Modeling crater topography and albedo from monoscopic Viking Orbiter images. I - Methodology

The methodology for a new photoclinometric technique for extracting topographic data from planetary images is described. The technique fully compensates for oblique viewing geometry prevalent in many spacecraft images. Brightness data are taken from a pair of profiles simultaneously, overcoming the problem of albedo variations in the application of photoclinometry to planetary surfaces. An additional procedure is described for eliminating the requirement of topographic symmetry along a pair of profiles. Test results show that both procedures have an accuracy of about two degrees for slopes of typical bowl-shaped craters, or about 5 percent for depths.

Davis, P. A.

Characterization of surficial geologic units on Venus from Pioneer Venus radar data: A progress report

A classification database using the reflectivity (derived from the altimetry data), rms slope, and the first principal component of altimetry and topographic slope is presented. The resultant clustered data is examined qualitatively as well as quantitatively, to establish the statistical integrity of each cluster by use of an interactive, ternary plotting algorithm. This algorithm plots, for a cluster, the position of each of its pixels within a ternary diagram whose apices represent reflectivity, rms slope, and the first principal component. The digital values in these three databases are normalized such that unity is represented by a value of 255 in each database. The frequencies of each plotted point within the ternary diagram are recorded in order to establish the mode of each cluster. The pixels of each cluster are displayed as one separate color; their ternary plot will show not only the interrelations between clusters, but also the presence of any anomalous points within a cluster. Existing lunar and terrestrial analog radar data is used to establish fields within this ternary diagram that are indicative of as many different geologic materials and tectonics settings as possible. The resultant fields are used to determine empirically the geologic significance of the clusters resulting from the cluster analysis.

Davis, P. A.

Rapid extraction of relative topography from Viking orbiter images. 2: Application to irregular topographic features

The ratio and flat field photoclinometric methods for determining crater form topography are described. Both methods compensate for the effects of atmospheric scattering by subtracting a haze value from all brightness values. Algorithms were altered to derive relative topographic data for irregular features such as ejecta blankets, lava flows, graben and ridge scarps, dune forms, and stratified materials. After the elevations along the profiles are obtained by integration of the photometric function, a matrix transformation is applied to the image coordinates of each pixel within each profile, utilizing each pixel's integral height, to produce a projection of each profile line onto the surface. Pixel brightness values are then resampled along the projected track of each profile to determine a more correct height value for each pixel. Precision of the methods is discussed.

Davis, P. A.

Mars' global properties - Maps and applications

Mars data sets from many sources have been put into a common digital format and global maps at constant scale have been produced. These formatted data sets form the basis of the Mars Consortium. They currently include maps of geology, volcanic units, channels, wind features, topography, gravity, Viking approach and apoapsis color, predawn temperature residuals, thermal inertia, radiometric and solar albedo, water vapor abundance, 1.4 micrometers albedo, crater abundance, Earth-based radar and photographic telescope observations, and terrestrial spectral observations. The generation of these data sets is briefly described. As an example of their use, the mapped geologic units are characterized in terms of color, predawn temperature and elevation, and unusual areas identified. The Oxia Palus region is examined as an example of combining higher resolution data with the Consortium data sets. Use of the existing data sets and submission of new ones are encouraged.

Kieffer, H. H.