Search NASA⌕ Search

Engineering topics

Daw, C Stuart

Publications and source records attributed to Daw, C Stuart.

66 records · Page 4

Microkinetic Modeling of Lean NOx Trap Chemistry under Reducing Conditions

An elementary surface reaction mechanism describing the chemistry on the precious metal sites of a lean NOx trap is developed. Kinetic parameters for all of the reactions are found by fitting reactor simulations to an extensive experimental data base. Each experiment involves the steady flow of a reactant mixture through a monolith core sample under conditions designed to minimize NOx storage; in each case, the temperature is slowly ramped over a wide range in order to provide a large amount of data. A reaction mechanism involving 28 elementary steps is able to reproduce the results for 21 separate experimental runs quite well. The thermodynamic consistency of the mechanism is assured through the imposition of constraints on a well-defined subset of the rate parameters. It is found that the mechanism can occasionally lead to multiple steady state behavior due to the existence of parallel reduction pathways. DRIFTS experiments corroborate some of the key mechanistic steps.

54 ENVIRONMENTAL SCIENCES↗

Sulfur and temperature effects on the spatial distribution of reactions inside a lean NOx trap and resulting changes in global performance

We experimentally studied the influence of temperature and sulfur loading on the axial distribution of reactions inside a commercial lean NOx trap (LNT) catalyst to better understand the global performance trends. Our measurements were made on a monolith core, bench-flow reactor under cycling conditions (60-s lean/5-s rich) at 200, 325, and 400 C with intra-catalyst and reactor-outlet gas speciation. Postmortem elemental and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analyses of the catalyst also supplemented our gas species measurements. For the unsulfated catalyst, the NOx storage/reduction (NSR) reactions were localized in the front (upstream) portion of the monolith, whereas oxygen storage/reduction reactions were distributed more evenly along the entire catalyst length. As a result, two axially distinct reaction zones were developed inside the working catalyst: an upstream 'NSR zone' where both NOx and oxygen storage/reduction took place and a downstream oxygen storage capacity (OSC)-only zone where the NSR reactions did not penetrate. The NSR zone involved less than half the LNT at 325 and 400 C, but it included almost the entire length at 200 C. Sulfation poisoned both the NSR and OSC reactions beginning at the catalyst upstream edge, with the NSR degradation occurring more rapidly and distinctly than the OSC. As sulfation proceeded, a third zone (the sulfated zone) developed and the NSR zone moved downstream, with a concomitant decrease in both the OSC-only zone and global NOx conversion. The sulfation impact on NOx conversion was greatest at 200 C, when the NSR zone was largest. Ammonia selectivity increased with sulfation, which we attributed to a shortened OSC-only zone and resultantly reduced consumption of NH{sub 3}, slipping from the NSR zone, by downstream OSC. Lower temperatures also increased NH{sub 3} selectivity. Nitrous oxide selectivity also increased with decreasing temperature but showed little dependence on sulfation. We proposed explanations for these trends in NH{sub 3} and N{sub 2}O selectivity based on shifts in competing reaction rates in the three zones.

54 ENVIRONMENTAL SCIENCES↗

Modeling Cyclic Variability in Spark-Assisted HCCI

Spark assist appears to offer considerable potential for increasing the speed and load range over which homogeneous charge compression ignition (HCCI) is possible in gasoline engines. Numerous experimental studies of the transition between conventional spark-ignited (SI) propagating-flame combustion and HCCI combustion in gasoline engines with spark assist have demonstrated a high degree of deterministic coupling between successive combustion events. Analysis of this coupling suggests that the transition between SI and HCCI can be described as a sequence of bifurcations in a low-dimensional dynamic map. In this paper, we describe methods for utilizing the deterministic relationship between cycles to extract global kinetic rate parameters that can be used to discriminate multiple distinct combustion states and develop a more quantitative understanding of the SI-HCCI transition. We demonstrate the application of these methods for indolene-containing fuels and point out an apparent HCCI mode switching not previously reported. Our results have specific implications for developing dynamic combustion models and feedback control strategies that utilize spark assist to expand the operating range of HCCI combustion.

33 ADVANCED PROPULSION SYSTEMS↗

Physical properties of bio-diesel & Implications for use of bio-diesel in diesel engines

In this study we identify components of a typical biodiesel fuel and estimate both their individual and mixed thermo-physical and transport properties. We then use the estimated mixture properties in computational simulations to gauge the extent to which combustion is modified when biodiesel is substituted for conventional diesel fuel. Our simulation studies included both regular diesel combustion (DI) and premixed charge compression ignition (PCCI). Preliminary results indicate that biodiesel ignition is significantly delayed due to slower liquid evaporation, with the effects being more pronounced for DI than PCCI. The lower vapor pressure and higher liquid heat capacity of biodiesel are two key contributors to this slower rate of evaporation. Other physical properties are more similar between the two fuels, and their impacts are not clearly evident in the present study. Future studies of diesel combustion sensitivity to both physical and chemical properties of biodiesel are suggested.

33 ADVANCED PROPULSION SYSTEMS↗

Development and Validation of a Reduced Reaction Mechanism for Biodiesel-Fueled Engine Simulations- SAE 2008-01-1378

In the present study a skeletal chemical reaction mechanism for biodiesel surrogate fuel was developed and validated for multi-dimensional engine combustion simulations. The reduced mechanism was generated from an existing detailed methyl butanoate oxidation mechanism containing 264 species and 1219 reactions. The reduction process included flux analysis, ignition sensitivity analysis, and optimization of reaction rate constants under constant volume conditions. The current reduced mechanism consists of 41 species and 150 reactions and gives predictions in excellent agreement with those of the comprehensive mechanism. In order to validate the mechanism under biodiesel-fueled engine conditions, it was combined with another skeletal mechanism for n-heptane oxidation. This combined reaction mechanism, ERC-Bio, contains 53 species and 156 reactions, which can be used for diesel/biodiesel blend engine simulations. Biodiesel-fueled engine operation was successfully simulated using the ERC-Bio mechanism.

09 BIOMASS FUELS↗

MODELING CYCLIC VARIABILITY IN SPARK-ASSISTED HCCI

Spark assist appears to offer considerable potential for increasing the speed and load range over which homogeneous charge compression ignition (HCCI) is possible in gasoline engines. Numerous experimental studies of the transition between conventional spark-ignited (SI) propagating-flame combustion and HCCI combustion in gasoline engines with spark assist have demonstrated a high degree of deterministic coupling between successive combustion events. Analysis of this coupling suggests that the transition between SI and HCCI can be described as a sequence of bifurcations in a low-dimensional dynamic map. In this paper we describe methods for utilizing the deterministic relationship between cycles to extract global kinetic rate parameters that can be used to discriminate multiple distinct combustion states and develop a more quantitative understanding of the SI-HCCI transition. We demonstrate the application of these methods for indolene-containing fuels and point out an apparent HCCI mode switching not previously reported. Our results have specific implications for developing dynamic combustion models and feedback control strategies that utilize spark-assist to expand the operating range of HCCI combustion.

HCCI↗

Analysis of cyclic variability in spark-assisted HCCI combustion using a double Wiebe function

A heuristic algorithm based on a double Wiebe function is proposed for estimating the relative importance of distinct combustion modes (propagating flame and compression ignition) occurring within individual combustion cycles as an engine is transitioned from conventional spark-ignited (SI) combustion to homogeneous charge compression ignition (HCCI). The proposed algorithm automates the analysis and categorization of pressure measurements from large numbers of individual cycles, providing new insight into the unstable combustion processes occurring during mode transition. Similar techniques could potentially be utilized for on-line diagnostics and control of the balance between SI and HCCI combustion in spark-assisted HCCI.

42 ENGINEERING↗

Physical properties of bio-diesel & Implications for use of bio-diesel in diesel engines

In this study we identify components of a typical biodiesel fuel and estimate both their individual and mixed thermo-physical and transport properties. We then use the estimated mixture properties in computational simulations to gauge the extent to which combustion is modified when biodiesel is substituted for conventional diesel fuel. Our simulation studies included both regular diesel combustion (DI) and premixed charge compression ignition (PCCI). Preliminary results indicate that biodiesel ignition is significantly delayed due to slower liquid evaporation, with the effects being more pronounced for DI than PCCI. The lower vapor pressure and higher liquid heat capacity of biodiesel are two key contributors to this slower rate of evaporation. Other physical properties are more similar between the two fuels, and their impacts are not clearly evident in the present study. Future studies of diesel combustion sensitivity to both physical and chemical properties of biodiesel are suggested.

33 ADVANCED PROPULSION SYSTEMS↗