Search NASA⌕ Search

Engineering topics

De, A.

Publications and source records attributed to De, A..

Engineering Dynamically Decoupled Quantum Simulations with Trapped Ions

An external drive can improve the coherence of a quantum many-body system by averaging out noise sources. It can also be used to realize models that are inaccessible in the static limit, through Floquet Hamiltonian engineering. The full possibilities for combining these tools remain unexplored. We develop the requirements needed for a pulse sequence to decouple a quantum many-body system from an external field without altering the intended dynamics. Demonstrating this technique experimentally in an ion-trap platform, we show that it can provide a large improvement to coherence in real-world applications. Finally, we engineer an approximate quantum simulation of the Haldane-Shastry model, an exactly solvable paradigm for long-range interacting spins. Our results expand and unify the quantum simulation toolbox.

97 MATHEMATICS AND COMPUTING↗

Comprehensive simulation of heavy-ion collisions at nonzero baryon chemical potential

Here, we present results of hydrodynamic modeling of Au-Au collisions from $\sqrt{s_{NN}}$ = 7.7 to 200 GeV. Our simulations have three novel components. First, we use a Linear EXtrapolation of Ultratrelativistic nucleon-nucleon Scattering to nucleus-nucleus collisions (LEXUS) inspired Monte Carlo initial-state model. Second, we use a crossover equation of state at finite baryon densities without a critical point. Finally, we use departure functions derived from the quasiparticle theory of transport coefficients for hadronic matter at nonzero baryon densities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Efficient Ground-State Cooling of Large Trapped-Ion Chains with an Electromagnetically-Induced-Transparency Tripod Scheme

Here, we report the electromagnetically-induced-transparency (EIT) cooling of a large trapped 171 Yb + ion chain to the quantum ground state. Unlike conventional EIT cooling, we engage a four-level tripod structure and achieve fast sub-Doppler cooling over all motional modes. We observe simultaneous ground-state cooling across the complete transverse mode spectrum of up to 40 ions, occupying a bandwidth of over 3 MHz. The cooling time is observed to be less than 300 μ s , independent of the number of ions. Such efficient cooling across the entire spectrum is essential for high-fidelity quantum operations using trapped ion crystals for quantum simulators or quantum computers.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Building blocks for a digital twin of additive manufacturing

Properties and serviceability of additively manufactured components are affected by their geometry, microstructure and defects. These important attributes are now optimized by trial and error because the essential process variables cannot currently be selected from scientific principles. A recourse is to build and rigorously validate a digital twin of the additive manufacturing process that can provide accurate predictions of the spatial and temporal variations of metallurgical parameters that affect the structure and properties of components. Key building blocks of a computationally efficient first-generation digital twin of laser-based directed energy deposition additive manufacturing utilize a transient, three-dimensional model that calculates temperature and velocity fields, cooling rates, solidification parameters and deposit geometry. The measured profiles of stainless steel 316L and Alloy 800H deposits as well as the secondary dendrite arm spacing (SDAS) and Vickers hardness measurements are used to validate the proposed digital twin. The predicted cooling rates, temperature gradients, solidification rates, SDAS and micro-hardness values are shown to be more accurate than those obtained from a commonly used heat conduction calculation. Finally, these metallurgical building blocks serve as a phenomenological framework for the development of a digital twin that will make the expanding knowledge base of additive manufacturing usable in a practical way for all scientists and engineers.

36 MATERIALS SCIENCE↗

Dimensionless numbers in additive manufacturing

In this paper, the effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. Finally, a high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

36 MATERIALS SCIENCE↗

Printability of alloys for additive manufacturing

Although additive manufacturing (AM), or three dimensional (3D) printing, provides significant advantages over existing manufacturing techniques, metallic parts produced by AM are susceptible to distortion, lack of fusion defects and compositional changes. Here we show that the printability, or the ability of an alloy to avoid these defects, can be examined by developing and testing appropriate theories. A theoretical scaling analysis is used to test vulnerability of various alloys to thermal distortion. A theoretical kinetic model is used to examine predisposition of different alloys to AM induced compositional changes. A well-tested numerical heat transfer and fluid flow model is used to compare susceptibilities of various alloys to lack of fusion defects. These results are tested and validated with independent experimental data. Here, the findings presented in this paper are aimed at achieving distortion free, compositionally sound and well bonded metallic parts.

36 MATERIALS SCIENCE↗

Heat transfer and material flow during laser assisted multi-layer additive manufacturing

A three-dimensional, transient, heat transfer, and fluid flow model is developed for the laser assisted multilayer additive manufacturing process with coaxially fed austenitic stainless steel powder. Heat transfer between the laser beam and the powder particles is considered both during their flight between the nozzle and the growth surface and after they deposit on the surface. The geometry of the build layer obtained from independent experiments is compared with that obtained from the model. The spatial variation of melt geometry, cooling rate, and peak temperatures is examined in various layers. The computed cooling rates and solidification parameters are used to estimate the cell spacings and hardness in various layers of the structure. Good agreement is achieved between the computed geometry, cell spacings, and hardness with the corresponding independent experimental results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗