Search NASASearch

Engineering topics

DeMott, P. J.

Publications and source records attributed to DeMott, P. J..

Nucleation in Synoptically Forced Cirrostratus

Formation and evolution of cirrostratus in response to weak, uniform and constant synoptic forcing is simulated using a one-dimensional numerical model with explicit microphysics, in which the particle size distribution in each grid box is fully resolved. A series of tests of the model response to nucleation modes (homogeneous-freezing-only/heterogeneous nucleation) and heterogeneous nucleation parameters are performed. In the case studied here, nucleation is first activated in the prescribed moist layer. A continuous cloud-top nucleation zone with a depth depending on the vertical humidity gradient and one of the nucleation parameters is developed afterward. For the heterogeneous nucleation cases, intermittent nucleation zones in the mid-upper portion of the cloud form where the relative humidity is on the rise, because existent ice crystals do not uptake excess water vapor efficiently, and ice nuclei (IN) are available. Vertical resolution as fine as 1 m is required for realistic simulation of the homogeneous-freezing-only scenario, while the model resolution requirement is more relaxed in the cases where heterogeneous nucleation dominates. Bulk microphysical and optical properties are evaluated and compared. Ice particle number flux divergence, which is due to the vertical gradient of the gravity-induced particle sedimentation, is constantly and rapidly changing the local ice number concentration, even in the nucleation zone. When the depth of the nucleation zone is shallow, particle number concentration decreases rapidly as ice particles grow and sediment away from the nucleation zone. When the depth of the nucleation zone is large, a region of high ice number concentration can be sustained. The depth of nucleation zone is an important parameter to be considered in parametric treatments of ice cloud generation.

Lin, R.-F.

Cirrus Parcel Model Comparison Project

The Cirrus Parcel Model Comparison is a project of the GEWEX Cloud System Study Working Group on Cirrus Cloud Systems (GCSS WG2). The primary goal of this project is to identify and quantify cirrus model sensitivities to the state of our knowledge of nucleation and microphysics. These factors are key to understanding microphysical development in cirrus and for developing realistic treatments of such processes in larger-scale models. Phase 1 of the project will be described.

Lin, R . F.

Analysis of Ice Nucleating Aerosol Measurements during SUCCESS: April, May 1996

This section describes our research activities during year three of this effort. In the second year, preliminary archive data sets were submitted to the SUCCESS archive. After additional analyses, final versions were prepared and submitted. These are included on the SUCCESS CD-ROM data editions that were recently released by NASA Ames. Over the range of temperature and supersaturation conditions of our measurements (15 to -40 C, and from ice saturation to approximately 15% water supersaturation), IN concentrations ranged from less than 0.1 to approximately 500 per liter, being generally greater at colder temperatures and higher supersaturations. To estimate the potential of aircraft exhaust as a source of IN, we examined data from six days of the field project when the DC-8 was following closely behind other humidity conditions of our measurements. In April 1997, a microphysical workshop was convened at NCAR to select cases for in depth analyses and to address questions about the consistency of cloud ice crystal measurements (size distributions and mass concentrations) and aerosol size distributions. We attended this meeting and contributed to the discussions. A particular concern was identified in the CN measurements. On the DC-8, CN measurements were obtained by four different investigator groups, using commercially available instrumentation. The DC-8 SUCCESS CN data showed long periods where the measurements were in substantial agreement, but there were also periods with large discrepancies. Several possible factors were identified that could help explain these discrepancies, including minimum detectable particle size, response at reduced pressures, and location of sample inlet on the aircraft.

Rogers, D. C.

Measurements of Ice Nucleating Aerosols in the Upper Troposphere and Lower Stratosphere

Our major accomplishments during Year 1 were: Development of aerosol and crystal collection techniques. Development of single-particle chemical characterization techniques. Modification of system design for DC-8 and initial testing. Our major accomplishments during Year 2 were: Completion of system design and proof-of-concept experiments. Participation in SUCCESS mission. Reporting of theoretical and laboratory findings in the scientific literature. Reporting of initial SUCCESS results at scientific meetings. Our major accomplishments during Year 3 were: Data reduction and submission of all SUCCESS data to the archive. Participation in SUCCESS data comparison workshops. Reporting of SUCCESS results at the AEAP Meeting. Organization of CN counter intercomparison workshop. Preparation of three manuscripts submitted to the GRL SUCCESS Special Issue.

Kreidenweis, S. M.

Laboratory Investigation of Direct Measurement of Ice Water Content, Ice Surface Area, and Effective Radius of Ice Crystals Using a Laser-Diffraction Instrument

The aircraft microphysics probe, PVM-100A, was tested in the Colorado State University dynamic cloud chamber to establish its ability to measure ice water content (IWC), PSA, and Re in ice clouds. Its response was compared to other means of measuring those ice-cloud parameters that included using FSSP-100 and 230-X 1-D optical probes for ice-crystal concentrations, a film-loop microscope for ice-crystal habits and dimensions, and an in-situ microscope for determining ice-crystal orientation. Intercomparisons were made in ice clouds containing ice crystals ranging in size from about 10 microns to 150 microns diameter, and ice crystals with plate, columnar, dendritic, and spherical shapes. It was not possible to determine conclusively that the PVM accurately measures IWC, PSA, and Re of ice crystals, because heat from the PVM evaporated in part the crystals in its vicinity in the chamber thus affecting its measurements. Similarities in the operating principle of the FSSP and PVM, and a comparison between Re measured by both instruments, suggest, however, that the PVM can make those measurements. The resolution limit of the PVM for IWC measurements was found to be on the order of 0.001 g/cubic m. Algorithms for correcting IWC measured by FSSP and PVM were developed.

Gerber, H.