Search NASA⌕ Search

Engineering topics

Debayle, A.

Publications and source records attributed to Debayle, A..

Laser-driven ion and electron acceleration from near-critical density gas targets: Towards high-repetition rate operation in the 1 PW, sub-100 fs laser interaction regime

Ion acceleration from gaseous targets driven by relativistic-intensity lasers was demonstrated as early as the late 1990s, yet most of the experiments conducted to date have involved picosecond-duration, Nd:glass lasers operating at low repetition rate. Here, we present measurements on the interaction of ultraintense ( ≈ 10 20 W cm − 2 , 1 PW ) , ultrashort ( ≈ 70 fs ) Ti:Sa laser pulses with near-critical ( ≈ 10 20 cm − 3 ) helium gas jets, a debris-free targetry with the potential for future compatibility with high ( ≈ 1 Hz ) repetition rate operation. We provide evidence of α particles being forward accelerated up to ≈ 2.7 − MeV energy with a total flux of ≈ 10 11 sr − 1 as integrated over > 0.1 − MeV energies and detected within a 0.5 − mrad solid angle. We also report on on-axis emission of relativistic electrons with an exponentially decaying spectrum characterized by a ≈ 10 − MeV slope, i.e., five times larger than the standard ponderomotive scaling. The total charge of these electrons with energy above 2 MeV is estimated to be of ≈ 1 nC , corresponding to ≈ 0.1 % of the laser drive energy. In addition, we observe the formation of a plasma channel, extending longitudinally across the gas density maximum and expanding radially with time. These results are well captured by large-scale particle-in-cell simulations, which reveal that the detected fast ions most likely originate from reflection off the rapidly expanding channel walls. The latter process is predicted to yield ion energies in the MeV range, which compare well with the measurements. Finally, direct laser acceleration is shown to be the dominant mechanism behind the observed electron energization. Published by the American Physical Society 2024

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear dynamics of the ion Weibel-filamentation instability: An analytical model for the evolution of the plasma and spectral properties

We present a predictive model of the nonlinear phase of the Weibel instability induced by two symmetric, counter-streaming ion beams in the non-relativistic regime. This self-consistent model combines the quasilinear kinetic theory of Davidson et al. [Phys. Fluids 15, 317 (1972)] with a simple description of current filament coalescence. It allows us to follow the evolution of the ion parameters up to a stage close to complete isotropization, and is thus of prime interest to understand the dynamics of collisionless shock formation. Its predictions are supported by 2-D and 3-D particle-in-cell simulations of the ion Weibel instability. The derived approximate analytical solutions reveal the various dependencies of the ion relaxation to isotropy. In particular, it is found that the influence of the electron screening can affect the results of simulations using an unphysical electron mass.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Enhanced Relativistic-Electron-Beam Energy Loss in Warm Dense Aluminum

Energy loss in the transport of a beam of relativistic electrons in warm dense aluminum is measured in the regime of ultrahigh electron beam current density over 2 × 10 11 A/cm 2 (time averaged). Furthermore, the samples are heated by shock compression. Comparing to undriven cold solid targets, the roles of the different initial resistivity and of the transient resistivity (upon target heating during electron transport) are directly observable in the experimental data, and are reproduced by a comprehensive set of simulations describing the hydrodynamics of the shock compression and electron beam generation and transport. We measured a 19% increase in electron resistive energy loss in warm dense compared to cold solid samples of identical areal mass.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The behavior of the electron plasma boundary in ultraintense laser–highly overdense plasma interaction

The structural stability of the laser/plasma interaction is discussed, for the case of a linearly polarized laser beam interacting with a solid at normal incidence. Using a semi-analytical cold fluid model, the dynamics of the electron plasma boundary (EPB), usually related to the high-order harmonic generation and laser absorption, are presented. While the well-known J × B plasma oscillations at two times the laser frequency are recovered by the model, several other periodic in time stable solutions exist for exactly the same value of the physical parameters. This novel behavior highlights the importance of the laser pulse history among other factors. Some important features, such as the synchronization between the incident laser and the EPB oscillation, depend on the solution under consideration. A description of the possible types of stable oscillations in a parametric plane involving plasma density and laser amplitude is presented. The semi-analytical model is compared with particle-in-cell and semi-Lagrangian Vlasov simulations. They show that, among all the stable solutions, the plasma preferentially evolves to a state with the EPB oscillating twice faster than the laser. The effect of the plasma temperature and the existence of a ramp in the ion density profile are also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Laser–plasma interactions for fast ignition

In the electron-driven fast-ignition approach to inertial confinement fusion, petawatt laser pulses are required to generate MeV electrons that deposit several tens of kilojoules in the compressed core of an imploded DT shell. We review recent progress in the understanding of intense laser- plasma interactions (LPI) relevant to fast ignition. Increases in computational and modeling capabilities, as well as algorithmic developments have led to enhancement in our ability to perform multidimensional particle-in-cell (PIC) simulations of LPI at relevant scales. We discuss the physics of the interaction in terms of laser absorption fraction, the laser-generated electron spectra, divergence, and their temporal evolution. Scaling with irradiation conditions such as laser intensity, f-number and wavelength are considered, as well as the dependence on plasma parameters. Different numerical modeling approaches and configurations are addressed, providing an overview of the modeling capabilities and limitations. In addition, we discuss the comparison of simulation results with experimental observables. In particular, we address the question of surrogacy of today's experiments for the full-scale fast ignition problem.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Unraveling resistive versus collisional contributions to relativistic electron beam stopping power in cold-solid and in warm-dense plasmas

We present results on laser-driven relativistic electron beam propagation through aluminum samples, which are either solid and cold or compressed and heated by laser-induced shock. A full numerical description of fast electron generation and transport is found to reproduce the experimental absolute K{sub α} yield and spot size measurements for varying target thicknesses, and to sequentially quantify the collisional and resistive electron stopping powers. The results demonstrate that both stopping mechanisms are enhanced in compressed Al samples and are attributed to the increase in the medium density and resistivity, respectively. For the achieved time- and space-averaged electronic current density, 〈j{sub h}〉∼8×10{sup 10} A/cm{sup 2} in the samples, the collisional and resistive stopping powers in warm and compressed Al are estimated to be 1.5 keV/μm and 0.8 keV/μm, respectively. By contrast, for cold and solid Al, the corresponding estimated values are 1.1 keV/μm and 0.6 keV/μm. Prospective numerical simulations involving higher j{sub h} show that the resistive stopping power can reach the same level as the collisional one. In addition to the effects of compression, the effect of the transient behavior of the resistivity of Al during relativistic electron beam transport becomes progressively more dominant, and for a significantly high current density, j{sub h}∼10{sup 12} A/cm{sup 2}, cancels the difference in the electron resistive stopping power (or the total stopping power in units of areal density) between solid and compressed samples. Analytical calculations extend the analysis up to j{sub h}=10{sup 14} A/cm{sup 2} (representative of the full-scale fast ignition scenario of inertial confinement fusion), where a very rapid transition to the Spitzer resistivity regime saturates the resistive stopping power, averaged over the electron beam duration, to values of ∼1 keV/μm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Toward a self-consistent model of the interaction between an ultra-intense, normally incident laser pulse with an overdense plasma

Following a recent work by Sanz et al. [Phys. Rev. E 85, 046411 (2012)], we elaborate upon a one-dimensional model describing the interaction between an ultra-intense, normally incident laser pulse and an overdense plasma. The analytical solutions of the reflected laser field, the electrostatic field, and the plasma surface oscillation are obtained within the cold-fluid approximation. The high-order harmonic spectrum is calculated from the exact solution of the plasma surface oscillations. In agreement with particle-in-cell simulations, two regimes of harmonic generation are predicted: for moderately relativistic laser intensities, or high plasma densities, the harmonic spectrum is determined by the discontinuity in the derivative of the reflected field when the electron plasma boundary oscillates across the fixed ion boundary. For higher intensities, the electron plasma boundary is confined inside the ion region and oscillates at relativistic velocities, giving rise to a train of reflected attosecond pulses. In both cases, the harmonic spectrum obeys an asymptotic ω{sup −4} scaling. The acceleration of electrons and the related laser absorption efficiency are computed by a test particle method. The model self-consistently reproduces the transition between the “anomalous skin effect” and the “J × B” heating predicted by particle-in-cell simulations. Analytical estimates of the different scalings are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Reduction of the fast electron angular dispersion by means of varying-resistivity structured targets

We present novel structured targets capable of collimating laser-generated fast electrons through dense plasmas. The proposed targets are made of narrow high- and low-Z filaments leading to a transversely modulated electrical resistivity profile. When featuring a spatially decreasing density, these targets permit both to guide the fast electrons and reduce their angular dispersion. The principle of our target design is explained by a theoretical model. Two-dimensional particle-in-cell simulations are performed to demonstrate its efficiency.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗