Search NASA⌕ Search

Engineering topics

Decha-Umphai, Kamolphan

Publications and source records attributed to Decha-Umphai, Kamolphan.

Multiple-mode nonlinear free and forced vibrations of beams using finite element method

Multiple-mode nonlinear free and forced vibration of a beam is analyzed by the finite element method. The geometric nonlinearity is investigated. Inplane displacement and inertia (IDI) are also considered in the formulation. Harmonic force matrix is derived and explained. Nonlinear free vibration can be simply treated as a special case of the general forced vibration by setting the harmonic force matrix equal to zero. The effect of the higher modes is more pronouced for the clamped supported beam than the simply supported one. Beams without IDI yield more effect of the higher modes than the one with IDI. The effects of IDI are to reduce nonlinearity. For beams with end supports restrained from axial movement (immovable cases), only the hardening type nonlinearity is observed. However, beams of small slenderness ratio (L/R = 20) with movable end supports, the softening type nonlinearity is found. The concentrated force case yields a more severe response than the uniformly distributed force case. Finite element results are in good agreement with the solution of simple elliptic response, harmonic balance method, and Runge-Kutte method and experiment.

Mei, Chuh↗

Multiple-mode nonlinear free and forced vibrations of beams using finite element method

Effects of large deflection geometric nonlinearity and multiple modes for free and forced vibrations of beams are investigated. Inplane displacement and inplane inertia are included in the formulation. The finite element method is employed. A harmonic force matrix is derived for forced vibration analysis. The relations of amplitude, frequency ratio and forcing intensity for beams of different boundary conditions and various load conditions are presented.

Mei, Chuh↗

Finite element method for non-linear forced vibrations of circular plates

Geometric non-linearities for large amplitude free and forced vibrations of circular plates are investigated. In-plane displacement and in-plane inertia are included in the formulation. The finite element method is used. An harmonic force matrix for non-linear forced vibration analysis is introduced and derived. Various out-of-plane and in-plane boundary conditions are considered. The relations of amplitude and frequency ratio for different boundary conditions and various load conditions are presented.

Mei, Chuh↗