Thermal-structural finite element analysis using linear flux formulation
Explore the source record for details and available documents.
Pandey, Ajay K.↗
Engineering topics
Dechaumphai, Pramote
Publications and source records attributed to Dechaumphai, Pramote.
Progress in integrated analysis with adaptive unstructured meshing
Design of lightweight structures and thermal protection systems for hypersonic vehicles depend on accurate prediction of aerothermal loads, structural temperatures and their gradients, and structural deformations and stresses. Concentration is on an alternative meshing technique which generates an entirely new adaptive unstructured mesh based on the solution obtained from the earlier mesh. The technique combined with the finite element method has been shown to significantly improve the efficiency and accuracy of the fluid, thermal, and structural analyses. Current capability of the adaptive unstructured meshing technique for the integrated fluid-thermal-structural analysis is described first. The technique was extended to transient thermal analysis of structures with time-dependent adaptive meshing to capture the detailed temperature response with a minimum number of unknowns and computational cost. Both linear and higher-order finite elements are implemented to demonstrate the generality of the technique and to investigate their solution accuracy. Currently, the adaptive meshing technique is being developed for plane structures that can be modeled with membrane elements and built-up structures modeled with membrane and bending elements. The capability of the technique to these different disciplinary problems is demonstrated by several examples.
Dechaumphai, Pramote↗
Three-dimensional thermal structural analysis of a swept cowl leading edge subjected to skewed shock-shock interference heating
Explore the source record for details and available documents.
Polesky, Sandra P.↗
Adaptive unstructured meshing for thermal stress analysis of built-up structures
An adaptive unstructured meshing technique for mechanical and thermal stress analysis of built-up structures has been developed. A triangular membrane finite element and a new plate bending element are evaluated on a panel with a circular cutout and a frame stiffened panel. The adaptive unstructured meshing technique, without a priori knowledge of the solution to the problem, generates clustered elements only where needed. An improved solution accuracy is obtained at a reduced problem size and analysis computational time as compared to the results produced by the standard finite element procedure.
Dechaumphai, Pramote↗
Adaptive unstructured meshing for thermal stress analysis of built-up structures
An adaptive unstructured meshing technique for mechanical and thermal stress analysis of built-up structures has been developed. A triangular membrane finite element and a new plate bending element are evaluated on a panel with a circular cutout and a frame stiffened panel. The adaptive unstructured meshing technique, without a priori knowledge of the solution to the problem, generates clustered elements only where needed. An improved solution accuracy is obtained at a reduced problem size and analysis computational time as compared to the results produced by the standard finite element procedure.
Dechaumphai, Pramote↗
Evaluation of an adaptive unstructured remeshing technique for integrated fluid-thermal-structural analysis
Explore the source record for details and available documents.
Dechaumphai, Pramote↗
Finite element thermo-viscoplastic analysis of aerospace structures
The time-dependent thermo-viscoplastic response of aerospace structures subjected to intense aerothermal loads is predicted using the finite-element method. The finite-element analysis uses the Bodner-Partom unified viscoplastic constitutive relations to determine rate-dependent nonlinear material behavior. The methodology is verified by comparison with experimental data and other numerical results for a uniaxially-loaded bar. The method is then used (1) to predict the structural response of a rectangular plate subjected to line heating along a centerline, and (2) to predict the thermal-structural response of a convectively-cooled engine cowl leading edge subjected to aerodynamic shock-shock interference heating. Compared to linear elastic analysis, the viscoplastic analysis results in lower peak stresses and regions of plastic deformations.
Pandey, Ajay K.↗
Thermal-structural finite element analysis using linear flux formulation
A linear flux approach is developed for a finite element thermal-structural analysis of steady state thermal and structural problems. The element fluxes are assumed to vary linearly in the same form as the element unknown variables, and the finite element matrices are evaluated in closed form. Since numerical integration is avoided, significant computational time saving is achieved. Solution accuracy and computational speed improvements are demonstrated by solving several two and three dimensional thermal-structural examples.
Pandey, Ajay K.↗
Three-dimensional thermal-structural analysis of a swept cowl leading edge subjected to skewed shock-shock interference heating
A three-dimensional flux-based thermal analysis method has been developed and its capability is demonstrated by predicting the transient nonlinear temperature response of a swept cowl leading edge subjected to intense three-dimensional aerodynamic heating. The predicted temperature response from the transient thermal analysis is used in a linear elastic structural analysis to determine thermal stresses. Predicted thermal stresses are compared with those obtained from a two-dimensional analysis which represents conditions along the chord where maximum heating occurs. Results indicate a need for a three-dimensional analysis to predict accurately the leading edge thermal stress response.
Polesky, Sandra P.↗
Evaluation of an adaptive unstructured remeshing technique for integrated fluid-thermal-structural analysis
An adaptive unstructured remeshing technique is evaluated for integrated fluid-thermal-structural analysis. The technique is combined with the finite element method to solve: (1) the Navier-Stokes equations for high-speed compressible flow; (2) the energy equation for the structural-thermal response; and (3) the quasi-static equilibrium equations for the structural response. The remeshing technique and the analysis solution procedure are described. The effectiveness of the approach is evaluated with two application studies. The flow analysis of Mach 8 shock-shock interference on a three-inch-diameter cylinder is used as the first application study to demonstrate the capability of the remeshing technique and to examine proper remeshing indicators for the inviscid and boundary layer regions. The applicability of the approach for the thermal and structural analyses of the structure is evaluated in the second application study of a 0.25-inch-diameter convectively cooled leading edge subjected to intense aerodynamic heating. Issues associated with remeshing indicators for thermal stress problems are identified.
Dechaumphai, Pramote↗
Evaluation of an adaptive unstructured remeshing technique for integrated fluid-thermal-structural analysis
An adaptive unstructured remeshing technique is evaluated for integrated fluid-thermal-structural analysis. The technique is combined with the finite element method to solve: (1) the Navier-Stokes equations for high-speed compressible flow, (2) the energy equation for the structural-thermal response, and (3) the quasi-static equilibrium equations for the structural response. The remeshing technique and the analysis solution procedure are described. The effectiveness of the approach is evaluated with two applications studies. The flow analysis of Mach 8 shock-shock interference on a three-inch-diameter cylinder is used as the first application study to demonstrate the capability of the remeshing technique and to examine proper remeshing indicators for the inviscid and boundary layer regions. The applicability of the approach for the thermal and structural analyses of the structure is evaluated in the second application study of a 0.25-inch-diameter convectively cooled leading edge subjected to intense aerodynamic heating. Issues associated with remeshing indicators for thermal stress problems are identified.
Dechaumphai, Pramote↗
Transient thermal-structural analysis using adaptive unstructured remeshing and mesh movement
An adaptive unstructured remeshing technique is applied to transient thermal-structural analysis. The effectiveness of the technique, together with the finite element method and an error estimation technique, is evaluated by two applications which have exact solutions: (1) the steady-state thermal analysis of a plate subjected to a highly localized surface heating, and (2) the transient thermal-structural analysis of a simulated convectively cooled leading edge subjected to a translating heat source. These applications demonstrate that the remeshing technique significantly reduces the problem size as well as the analysis solution error as compared to the results produced using standard structured meshes.
Dechaumphai, Pramote↗
Finite-element thermo-viscoplastic analysis of aerospace structures
The time-dependent thermo-viscoplastic response of aerospace structures subjected to intense aerothermal loads is predicted using the finite-element method. The finite-element analysis uses the Bodner-Partom unified viscoplastic constitutive relations to determine rate-dependent nonlinear material behavior. The methodology is verified by comparison with experimental data and other numerical results for a uniaxially-loaded bar. The method is then used (1) to predict the structural response of a rectangular plate subjected to line heating along a centerline, and (2) to predict the thermal-structural response of a convectively-cooled engine cowl leading edge subjected to aerodynamic shock-shock interference heating. Compared to linear elastic analysis, the viscoplastic analysis results in lower peak stresses and regions of plastic deformations.
Pandey, Ajay↗
Integrated fluid-thermal-structural analysis using adaptive unstructured meshes
An integrated fluid-thermal-structural analysis approach using adaptive unstructured meshes is presented. The approach combines the finite-element method and an adaptive remeshing technique to solve the Navier-tokes equations for high-speed compressible flow, the energy equation for the thermal response of the structure, and the quasi-static equilibrium equations for the structural response. The analysis solution procedure and the adaptive unstructured remeshing technique are described. The effectiveness of the approach is evaluated with three application studies. The adaptive unstructured remeshing procedure and finite-element solution algorithms combine to yield increased accuracy and effiency over standard structured meshes.
Dechaumphai, Pramote↗
Flow-thermal-structural study of aerodynamically heated leading edges
Explore the source record for details and available documents.
Dechaumphai, Pramote↗
Finite element flow-thermal-structural analysis of aerodynamically heated leading edges
Hypersonic vehicles operate in a hostile aerothermal environment which has a significant impact on their aerothermostructural performance. Significant coupling occurs between the aerodynamic flow field, structural heat transfer, and structural response creating a multidisciplinary interaction. A long term goal of the Aerothermal Loads Branch at the NASA Langley Research Center is to develop a computational capability for integrated fluid, thermal and structural analysis of aerodynamically heated structures. The integrated analysis capability includes the coupling between the fluid and the structure which occurs primarily through the thermal response of the structure, because: (1) the surface temperature affects the external flow by changing the amount of energy absorbed by the structure, and (2) the temperature gradients in the structure result in structural deformations which alter the flow field and attendant surface pressures and heating rates. In the integrated analysis, a finite element method is used to solve: (1) the Navier-Stokes equations for the flow solution, (2) the energy equation of the structure for the temperature response, and (3) the equilibrium equations of the structure for the structural deformation and stresses.
Dechaumphai, Pramote↗
Thermal-structural finite element analysis using linear flux formulation
A linear flux approach is developed for a finite element thermal-structural analysis of steady-state thermal and structural problems. The element fluxes are assumed to vary linearly in the same form as the element unknown variables, and the finite element matrices are evaluated in closed form. Since numerical integration is avoided, significant computational time saving is achieved. Solution accuracy and computational speed improvements are demonstrated by solving several two-and three-dimensional thermal-structural examples.
Pandey, Ajay K.↗
Fluid-thermal-structural interaction of aerodynamically heated leading edges
A two-dimensional finite element approach is presented for the integrated fluid-thermal-structural analysis of aerodynamically heated leading edges. The approach is combined with an adaptive unstructured remeshing technique to solve the Navier-Stokes equations for high speed compressible flow, the energy equation for the structure thermal response, and the quasi-static equilibrium equations for the structural response. Coupling and interaction between the three disciplines are demonstrated using two applications for high speed flow over a cylinder and a simulated engine leading edge verification test.
Dechaumphai, Pramote↗